Remote controls are practical, convenient things that allow you to use your TV with ease. Universal remote controls are used to control IPTV set-top boxes Beeline TV, TV.
They are created by Motorola and are distinguished by ease of use and compactness. But often users have problems in practice, they may face a situation when the remote control is locked.
In this case, the product simply will not work, will not be able to perform the necessary tasks. That is why you need to figure out in advance how to unlock the Beeline TV remote control, how to use cisco.
If you are faced with the task of setting up the remote control from the Beeline TV set-top box, then it is worth noting that the Motorola VIP 1216 model and others are popular. They are considered universal, so there should be no difficulty in setting them up.
There are two main ways to configure, as evidenced by the instructions. They are significantly different from each other, but both have the right to be. If the remote control refuses to work normally, then you should resort to one of them:
- In the first case, you will need to reprogram the product yourself in manual mode.
- It may seem simpler since you don't have to do reprogramming. You can manipulate the standard menu.
Various technical problems may occur, for example, it may happen that the consoles themselves do not listen. In such a situation, it will be quite difficult to control a set-top box or a remote control. There are also cases when the problem lies in the digital set-top box.
Do not forget that the TV has a television receiver, it can also cause problems - it can ignore the signals supplied by the remote control. In any case, you can cope with the problem, we have collected information about the settings instructions for you here:
Select your remote and download the official instructions.
Also, if you have an iPad, you can control your TV through the My Beeline application -
The MTS TV service appeared relatively recently and has already gained great popularity among users. However, the network is increasingly asking questions about how to unlock the MTS TV remote control. User complaints are not unfounded, but most often they are associated with problems of improper use of equipment. At the same time, it is possible to unlock on your own without any skills in working with equipment.
Many people think that the remote is blocked if it stops responding to commands. However, in such a situation, it is not always a question of direct blocking. Most often, the reason for the lack of reaction of the remote control to the impact is due to the loss of battery power or the transition to the TV control mode. Accordingly, it is recommended first of all to try to replace the batteries. If the remote control still does not work, it must be returned to normal operation.
The company provides several types of consoles and remotes corresponding to them. Therefore, the solution to the problem of how to unlock the MTS remote control will be slightly different:
- For ZTE-B700V7. Switch the remote control to the correct mode using the button labeled “MTS”. Below it is a light indicator showing the readiness or unavailability of the device for operation.
- Huawei DN 300. To unlock, you need to press the “TV” or “MTS TV” button and pay attention to the indicator. Its single blinking indicates the transition to the control mode of the set-top box, twice - the TV.
- SML-282/292/482. The transition to the desired mode is carried out with the STB button.
- Motorola VIP 1003. Enabling the control mode of the set-top box - MTS, TV - TV.
These methods are relevant only if the TV and the set-top box itself are in good working order.
If the switching instructions do not help, it is necessary to perform a technical diagnostics of the equipment. In addition, it is recommended to check the condition of the connection cables, since not always the lack of reaction to pressing the buttons indicates a direct blocking of the remote control.
Conclusion
Some MTS subscribers complain about the difficulty of operating a TV set-top box due to the systematic blocking of the remote control device. However, the phenomenon does not always indicate the presence of malfunctions, therefore, if a lack of response is found, it is recommended to check the remote control for the type of system connection. If this does not help, you should also analyze the quality of the batteries, cables, and then the equipment.
Sometimes it happens that children or adult users inadvertently turn on the lock on the TV, or parents block the TV from children, and then find it difficult to remove it. It is not uncommon for the owner to simply forget the password and now he himself cannot view the channels. Signs of blocking the TV are:
Displaying a blue screen with a key;
A field appeared on the screen where the device asks for a PIN code (password);
Only one channel is available for viewing.
Answering the question of how to remove the lock from the TV, it is necessary to highlight three main options for solving this problem, namely:
Disable blocking using the remote control by typing a special combination of buttons;
Reconfigure channels (sometimes they can be knocked down by accident or due to a software failure);
Flash TV memory.
Usually, the blocking is removed on its own, but if a flashing is required, it is better to resort to the help of a specialist. In general, for independent work, the owner needs only two things - an instruction manual for his TV and a working remote control for it. If the instruction is lost, it will not be difficult to view or download it on the Internet. For TV model, this information can be found on the rear of the TV.
What to do in a standard situation
Having on hand the instructions for the TV, you should carefully read those sections of it that relate to blocking. Your task is to find a special code, a combination of numbers, after the dialing of which a lock is put and unblocked on the remote control. Also, the instructions contain the steps and their sequence specifically for your model. If there are no instructions, and access to the network is also not available at the moment, you will have to strain your memory and remember what exactly led to the device being blocked.
From the remote control, you need to press the P and + buttons, holding them at the same time. Next, in the field you need to enter a password of three or four digits. The type of such combinations usually consists of the same values, for example, 1111, 4444, 333, coinciding with the number of the most frequently used channel. Quite often, standard codes in the form of 1234 and others are used. After entering, press + again.
If, after these steps, you cannot unlock the Akai TV (Akai), Samsung, LG, Thomson models and others, the password is not reliably known, you can try other combinations, they are set by the factory settings, which are not too complicated.
There are TVs that support locking with only one button. Accordingly, to block or unblock channels, you need to hold down this button for five to ten seconds.
Potential problems and what to do about them
Before unlocking the TV, you must first investigate the cause of the problem. Based on practice, the most common cases are presented below:
|
What could be |
How to fix |
|---|---|
|
The user has set a password and forgot, does not know it (a blue screen with a key may indicate this) |
Hold down the DISP button on the remote for ten seconds. If it does not help, use the standard remote control in accordance with the instructions for the TV |
|
Childproofed but lost remote control |
It is impossible to solve the problem without a remote control, you need to find it or buy a new one |
|
TV does not respond to button presses on the remote control |
Perhaps the remote control is out of order or the batteries are dead. Purchase new batteries or a remote control. You can also use your smartphone as a remote control (if the TV supports this function). You can also check the performance of the old one using the phone, holding down any button and taking a photo of the remote control aimed at the phone - if there is a micro-flash in the photo, the remote control is working. In this case, the TV port is probably out of order and you need to call the wizard. |
|
Only one channel is available for viewing |
Probably, the channel setting is out of order. No wizard is needed, as you can configure them yourself |
Sometimes it happens that after unlocking the TV channels are not tuned or after they get lost again, the TV menu hangs, and other strange failures are found. This may indicate that the tuner is defective and the TV needs to be flashed (updated). For inexperienced users, it will be more expedient to contact a specialist.