Routers are integrated within any zone covering an unbounded number of devices and on any of them can operate the high-speed Internet that powers the previous model. In this way, we can easily connect and configure one of them through the other or through the other.
Substance of nutrition
It often happens that in an apartment or country house one router cannot cover the entire territory. Even more relevant is the provision of food at private companies, where the office, store and warehouse are located in one building, and drone-free Internet is required throughout the entire territory of the company. Here it will help to combine Wi-Fi routers into a single network with unified Internet access on one of them.
How to connect and connect routers in the bedroom
There are different methods via cable and Wi-Fi. The remaining method is the most popular and has different types: bridge mode, repeater mode, client mode (like a simple Wi-Fi module) without distribution (distribution only via LAN cables), etc.
The actions of the commands of the Pokrov's instructions were translated by the Russian language.
Bridge construction based on WDS
WDS technology allows you to set up local networks in any area without a LAN cable, which can also be created with Wi-Fi routers. Such a device immediately retrieves data and distributes it further to other routers. You can create a drone-free line or a “tree” from routers of any length, which allows you to enter into the settings of any of the front routers through connections to the current one.
Yak butt - TP-Link routers. This is one of the most popular brands. Routers and D-Link distribution points are connected to every other customer.
Extensive data exchange between routers and network clients
For example, the TP-Link 11n device takes IP addresses 192.168.1.1, and the access point (Root AP) takes 192.168.1.2. The skin device in the drone-free zone is assigned its own address - otherwise, if there is a conflict with the IP address, the connection will be broken. Change the IP by logging into the router and entering the required IP address.
Changing IP on the router
To change your IP address, do the following.
If there is no connection with the local network of the router, the TP-Link stub page will light up
Upon successful login to tplinkwifi.net or local IP router, request login and password
Go to LAN settings
Enter the required address and press the save buttonThe device connections must be reconnected. Setting up a connection on a PC or gadgets from which the IP is changed on the router also needs to be changed.
Setting up a WDS network on a TP-Link router
Depending on the firmware version of the router, the options and lists are adjusted in a different order. The same functionality will be lost if the innovations are not covered by updating the firmware of the device or replacing it with a different model.
Recommended Wi-Fi settings on TP-Link routers
Turn down WDS to automatically download Wi-Fi
Select channel number, technology and connection speed
Find the SSID of another router and connect to the new one
Zachist recommended
Automatic IP selection (DHCP) often prompts you to connect
Press the Reboot button to restartThe construction of the WDS boundary bridge is completed! To check the measure, do the same.
Launch the command line under the administrator account
If the instructions are not correct, the border area is required to complyYou can quickly cross your hedge bridge. The routers of other providers are configured in a similar way - they all support WDS, and the menus and submenus in the configured ones differ little.
Site Administrator
26.06.2019
When faced with the problem of installing a router, you might be a hack, as if yesterday everything worked just fine. Not only will the device require adjustments and adjustments, but problems can arise from broken adjustments, firmware updates, or the addition of a new equipment. Let's try to go through the entire installation process, having gone through all the stages from unpacking the box to the Internet, which then starts working.
How to connect the device?
Those who connect the router at home independently - the amount of power supply, your decision begins with unpacking the router. For the device to work, you need to connect it correctly:
- Zhivlennya. It is best to use the power supply unit that comes with the kit to connect, and when replacing it, switch to voltage (voltage).
- Provider's mesh cable (WAN). The connector for the WAN wire is usually color-coded or signed.
- Conducting home networking (LAN). Home devices can connect to the Internet either via WiFi or wirelessly. Look on your router for a number of LAN connectors, some of them are grouped and assigned the same color.
The installation of a router in an apartment, as a rule, is located in the central part, which allows for a more even surface.
However, once you start connecting the Wi-Fi router to the Internet, you will then need to configure the hardware - the router and the computer.
How do I set up my connection?
Most homeowners find it difficult to set up a router themselves, but it’s actually quite easy to do. If you can independently install a TP Link, Zyxel, ASUS, D-Link router or anything else, we can help you solve this problem.
To first find out about the settings of your provider, the easiest way is to simply call the technical support and ask. Provider consultants are willing to assist providers in the adjustment process, predicting where to press and which steps to remember. However, hotline operators will often have to find the required parameters through the sound system and adjust the router’s operation on their own.
Another way to find out your Internet settings is to check them on the connection that is already working. This method is suitable if you plan to install a new router to replace the old one, but the old one works normally.
To get started, you need to open the web interface, sometimes called the control panel, for which you need:
- Open any browser on your computer.
- In the address row you need to enter the IP address of the router, which is standard and is stored in the device model. Most often 192.168.0.1 and 192.168.1.1.
- Login and password are also standard. As a rule, the login is admin, and the password is 1234 or admin. Other data can be found on the device body.
- The window of the ceramic panel opens.
Installing a Wi-Fi router TP Link at home can be simpler, since you do not use the web interface, but a special program for TP Link - Tether. In this case, you need to apply the same parameters as in the web interface.
The next step is to set up the configuration, and your provider will set your individual Internet parameters, so you can download them immediately.
To connect to the Internet, you need to:
- Connection type. Set up in the “Internet”, “Merezha” or “Network” tabs, the most commonly used type is PPPoE. For some models you need to select from the list, sometimes you need to create a new PPPoE connection or configure it externally.
- I am the password. You need to set it in the same tab as your connection type. The login and password are individual for the skin care provider; you can find them in the agreement with the provider.
- IP parameters. Also configured in the Internet tab, most often the automatic parameters or Dynamic IP are selected.
- Connection mode. This parameter can be found in the “Customization” menu. In order to select the Internet from your provider and distribute it across your home network, you need to select the “Router” or “Internet Center” mode.
Please note that the tab bar in the web interface can be expanded left-handed and from the bottom, which is located under the device model.
Where does the connection to the provider end, but still, how to install a Wi-Fi router at home yourself, and even a drone-free connection will also require setup? We have learned more about this.
How do I configure WiFi?
The web interface has a “WiFi”, “Wireless” or “Wireless” tab, and you need to open it:
- You need to select a security level, WPA2-PSK is recommended.
- It is better to choose a wide standard so that devices with different WiFi modules can connect to your home network. Recommended b/n/g.
- I will name the network and change the key (password).
- The channel needs to be set to auto, but later you can manually sort through the channels to find the one that will have the best performance.
An important note: if the customer decides to reinstall the TP Link, D-Link, ASUS, Zyxel or any other router, then WiFi is reset to factory settings. This means that the password for the dartless track will become the same as it is assigned on the device body, so you can replace it.
From here, phones can connect to WiFi, and for laptops and computers, you will need to set the middle payment settings.
How do I configure my computer?
It is important to install the Wi-Fi router on your computer correctly so that there are no problems with the connection. What is needed for:
- Press Win+R and type ncpa.cpl in the window - the network connections menu will open.
- Right-click on the required connections and select “Power”.
So the adjustment is over.
Why bother if nothing happened?
If you are having problems, you will need to do the following:
- Check the details before and after the router: they will be intact without any creases, the connectors are not to blame. If there is a problem, you need to replace the cable or re-crim it (replace the connectors).
- Call technical support and ask consultants for help with installing the configuration on the router and computer.
Thus, if you decide to install the router yourself, you will have to worry about everything: from power supply, to installing the router at the apartment, to setting up the settings with the provider. It’s awkward, but it’s important because of the importance and patience.
Not so long ago, a computer, or more specifically a laptop, was in disarray. Today, every family member has a computer or laptop, and in rich families, every family member has this device. Skin devices are to blame for their mother’s access to the Internet, since a computer without the Internet is not a “box”. With the development of technology, in order to divide Internet traffic into a number of devices, it is no longer necessary to connect a cable to each device; everything can be done all over again - with the help of additional Wi-Fi technology.
statistic:
Advantages of Wi-Fi
Before we learn about setting up a Wi-Fi network in your home, let’s learn about the advances and advantages of this technology. So, if you have a need to divide your existing Internet channel into a number of devices, then you need a router. If you want to share an Internet channel by connecting devices without hijacking, then a Wi-Fi router will help you. We have already told you about those, and we recommend that you read this article again before purchasing. A Wi-Fi router is an excellent option if you have a device that supports Wi-Fi operation. In this way, by installing a Wi-Fi router in a central location, you can provide Wi-Fi coverage throughout your entire apartment, which is very easy, even if you don’t need to worry about it. If your computer does not have a Wi-Fi adapter, then this power supply can be obtained in two ways: install a Wi-Fi router in the room where the computer is located, or add a Wi-Fi adapter. A Wi-Fi adapter is a small device that looks like a flash drive or looks like a card that is inserted into a PCI slot.We respect those who practically in their homeland need to install a Wi-Fi router, then we know how to set it up independently, without the master’s call.
Setting up a Wi-Fi router
To set up your router, you need to connect it via cable to your computer or laptop. The connection diagram may be shown in the instructions. We unpack the router, screw it to the new antenna, then connect one part of the cable (which is included in the kit) to the router, and the other to the computer (laptop). Then we connect the router and then connect the Internet provider's cable to the next one.How to go to the router menu
Absolutely all Wi-Fi routers are configured using an additional WEB interface, which is a kind of website with configurations. So, in order to configure the router, you need to open the page with your settings in your browser. To do this, enter 192.168.1.1 in the address bar of your browser and press the Enter key. After this, a window will appear on the screen in which you will need to enter your login and password to access the router. Standard (by default) login and password for the router setup menu: “admin” - in small letters. After entering, press “OK” and go to the menu.
Reflashing a Wi-Fi router
Also, in order to set up a Wi-Fi router, you first need to reflash it. As you are a human being, you have done enough, and you know this and that, then we will immediately recognize what needs to be done for. If you don’t really like to understand all the intricacies of computer technology, you can do without flashing the router. Firmware is a kind of operating system of the router on which your robot is based.
Is flashing needed? Reflashing the router is necessary in order to ensure normal and smooth operation of the device. As a rule, a Wi-Fi router carries the same firmware version from the moment it is released until it is decommissioned. The firmware is allowed to undergo internal tests if the device reaches mass sales in order to detect any problems in the device, in various situations. Therefore, “real” firmware is not complete and you may have problems with your device: low speed, freezing, problems with Wi-Fi, etc. It’s better to install a new version of the firmware.
To restart your Wi-Fi router, you need to download the firmware file. You can, of course, attract him from the official website of the vibrator. To do this, on the website of the device manufacturer, find the model of your Wi-Fi router, and click on the “Innovation” tab, there will be a list of available firmware. Some providers can send you to an FTP server where the firmware is saved. If you don’t rush to buy the remaining version of the firmware, first read the forums where users who installed this firmware, wrote a video about how it works, and made a copy of it: install it anyway.
Having downloaded the archive with the firmware, unzip it and copy the firmware file to the download folder. In the router menu, go to the Firmware section and in the field tell the router to update the new firmware. You can find detailed instructions on how to reflash your router in the instructions for installation.
After flashing, go to the Network/IPConfig/Metering menu (depending on the model of your router) and immediately set up the provider.
WAN connection type
- Dynamic IP / DHCP / Dynamic IP - selectable depending on the provider providing dynamic IP;
- Static ip / Statistical IP addresses - selected as a wake-up provider on a local network, where to access the Internet you need to enter an IP address, a connection mask and a Gateway.
- PPPoE - select the location where you need to enter your login and password to access the Internet.
DNS 1 and DNS 2 - you should not set them automatically, if the provider requires manual settings (which is even rare), then enter the first and second DNS. It is always necessary to enter the provider’s DNS when setting up a network, while other external DNS are more often used for the provider’s.
Then we go to the Wireless tab, where you can see the Wi-Fi settings.
How to fix Wi-Fi
Measurement name (SSID)
The name of the network is the name of your Wi-Fi router, which will appear when you are looking for a device to connect to Wi-Fi. We recommend that you set the original name to prevent any errors. If you have 2 devices with the same names, then the Wi-Fi connection may be incorrect.
Channel
This is the frequency channel through which data is transmitted. This parameter should be given special attention, because through this you may have low Wi-Fi speed. Why? The skin channel has its own, so be aware of the obligations of data transmission. The more of your devices are connected via Wi-Fi, the lower the Internet bandwidth for each device - this also reduces the channel, the more devices share the same channel, the less bandwidth there is. Therefore, if you have a high speed of your Internet connection, and the Wi-Fi channel is changed, then the speed of your Wi-Fi connection will be very low.
If you don’t have the same seats stuck in, then this parameter can be set to “Auto”. It’s easy to check the Wi-Fi activity of your neighbors - select the Connect Wi-Fi menu list and see the number of Wi-Fi routers that are available in your apartment: it’s not enough to install them, but it’s easier to install them by hand.
Note that “Auto” selects the 6th or 7th channels, then when manually selecting it is necessary to select the channels that are currently available. So, since in May the connection via Wi-Fi went down, and via cable - this is consistent with the statements, then it is possible that the whole problem lies in the Wi-Fi channel.
Wireless Mode
This parameter sets the standard for dartless tracking. There are two factors that determine the standard of drone-free measurement: the ability of the robot to work in new devices of the old type and the speed of Wi-Fi. So that Wi-Fi uses its own operating standards, and so that you can understand it better, let’s take a look at the example. In the past, the Internet was transmitted via WAP, then via GPRS, then via EDGE, etc., with each new type, the speed of data transfer has increased - in our situation everything is the same. If the letter behind the letter indicates the standard connection, then the smoothness of the transmission is enhanced. But here it is necessary to note one more point: not all devices that have been released for a long time and support the work in Wi-Fi networks support the other type of connection – and it is not necessary to fix it.
When choosing the type of wireless connection, select the type that is supported by all your Wi-Fi devices. Devices of a new type can work with older types, but not by chance. Lest you get confused, most current Wi-Fi routers can work with a number of standards - which is quite easy, for which you set the value “b/g/n” (i.e.).
Channel width
The channel width is indicated in megahertz. It is recommended to disable this parameter in the “Auto” parameter, or set the maximum value.
Maximum data transmission speed
This parameter sets the maximum transmission speed - speed reduction. Of course, the best value is to set this parameter to its maximum value. Since the main use of the Internet is the Internet, and you need high speed data transmission via a cable on your computer, you can reduce the Wi-Fi speed using this method.
Encryption type
Another important parameter when setting up a Wi-Fi router is the type of encryption of the data being transmitted. The more reliable the type of encryption, the more securely your data will be transmitted. Today, the shortest encryption type is WPA-PSK/WPA2-PSK. But here we should pay attention to the fact that not all devices support this type of encryption and it is possible that when choosing, you will need to find a “golden mean” for all devices.
How to set up Wi-Fi on a computer and laptop
Let's briefly explain how to set up Wi-Fi on Windows 7 and Windows 8. In order to set up Wi-Fi on a laptop or computer, you need to select your Wi-Fi router from the list of Wi-Fi devices that you were given the original name. I. Then we click on his name 2 times with a mouse, and we are prompted to enter a password - enter the password, it is checked, and if you entered everything correctly - the device connects to Wi-Fi. After this, it is recommended to check both the network and Wi-Fi. Please note that Wi-Fi speed may be limited by the bandwidth of the router. Therefore, you can see this as LAN.To connect a laptop to Wi-Fi, you must properly turn on the Wi-Fi module. As a rule, on laptops there is a dedicated button, which can either be adjacent to or connected to the F7 key.
You can find out more detailed information about setting up a Wi-Fi connection from the video below.
Vitannya! In this article, I want to tell you how to install a Wi-Fi router at home yourself without the help of arrogant and expensive masters! It's your first router, but you want to replace it. Briefly and in order, and if you can’t get away with rapping, you can now withdraw your feedback from the comments. Let's start!
Short plan
The article is universal and suitable for any router model. If you have problems with the installation, you must check your model by searching on our website! There you will find exact instructions for your router with pictures and videos!
Since this article is illegal, we will understand the basic algorithm that will allow you to install any router. So, first of all you need to get help, you need to determine what stage the problem is at. Here I give the details briefly, below will be more detailed deciphering.
- Type of router - what kind of router do you have, why?
- Choose a place - where to place it correctly, so that the measure comes out and the particles are drained.
- Let's connect the arrows - where is right and how to do it.
- Let's go into setting up the router.
- Setting up the Internet.
- Setting up Wi-Fi.
- Change passwords.
We briefly walked down all the layers of the beast and marveled at what stage you stopped at. Then go to the required section or simply find your model with us and get acquainted with the settings already there. The axis is the entire basic installation algorithm. Then you will be deprived of your earnings.
The instructions are suitable for any router manufacturer - be itTP-Link,D-Link,ASUS etc.
What kind of router do you have?
First of all, let's figure out what kind of router you have. Invite them to share the connection log. Most popular axis:
- Ethernet is a basic router, in which the pair is twisted from the front. Most home routers are like this. The router is connected to the provider's wire. Maximum speed for streaming technologies is up to 1 Gbit/s (provided we do not have such tariffs, everything is in reserve).
- LTE 3G/4G – the same router with a SIM card. There is no need to set up a daily wire, just a SIM card and operator coverage is enough. The Internet is more expensive, but it is not possible to stretch the wire, but the method is most often limited.
- ADSL modems – use telephone lines. Thin cord, small connector. So, just like Ethernet, it draws a wire from the entrance, but will be on the existing telephone line. Intermediation – speed up to 24 Mbit/s. At this time, there is no longer any contact with the great places, but to the knowledge of our consultations with the provinces, they are still in abundance.
The installation of a skin type has its own nuances at the stage of connecting by wire and basic Internet setup. Mi on tse savagely respect. It’s better to know the instructions for your model.
Select location
Very important nuances:
- If you need to connect the cable from the bottom (Ethernet, ADSL) - change the cable so that you can reach the installation location. If you are new to the Internet, you can always ask the master to extend the wire to the required location, otherwise you may have to call him again. As a rule, the provider provides this service at no cost.
- If it is on the right side of the bezdrotny connection, you may need to place a white window, especially with different external antennas, then the signal will be shortened.
- For the best protection of the Wi-Fi signal even in the apartment, it is best to place the router in the center of the room, aligned with the walls. In fact, you can only work with the “tika” way, set it up, freeze it, move it. And so on until the best result. All theoretical witches are nonsensical, take a lot of time and often malfunction.
We connect the wire
If you are planning to change your router, just remember to unplug all the cords on your old router and do the same on the new one!
What you need to connect to a standard router:
- Life cable – indicators light up.
- Provider wire – WAN port.
- The connection to the computer (as required, as a rule, is required when setting up for the first time) – has a LAN port.
Please check that the first 2 points are connected! There were problems that people could not configure the router without a cable provider.
If you have ADSl, then there is little difference with the splitter. Splitter divides the telephone line between the phone itself and the Internet. Connecting to the WAN becomes a little more complicated at once:
With mobile networks, everything is simple - you just need to install a SIM card and the router will be ready for work.
As a result, everything is easy to do independently at home! Golovne rosіbratsya and srobiti.
Let's get started
Once everything is connected correctly, it’s time to go into setting up the router. Let's try this message:
192.168.0.1
192.168.1.1
Login: admin
Password: admin
If not, turn your router over and see the sticker there. May buti schos na kshtalt tsyogo:
I may go. If you are unable to login, please refer to the instructions for your model. This is the language stage!
Setting up the Internet
After you have finished setting up, it’s time to connect to the Internet.
For further setup of your Internet connection and Wi-Fi network, please refer to the specific instructions on our website for your model. From now on there will be no more joy in the world!
The easiest way is to earn money through the Shvidkikh section. Butt axis on my TP-Link:
This mode will guide you through the process, supply you with everything you need, and get started on your own. At the setup stage you will need:
- Login and password for the Internet - specified in the provider agreement. No more is needed.
- Connection type – PPPoE (whichever requires a login and password) or Dynamic IP – whichever is not required (more rarely).
- For ADSL - for them, the relevant values are VPI and VCI - check with your provider, each person has their own information, which is also written in the contract.
WiFi
If the Internet operates, at this stage you will be asked to enter all the data for the Wi-Fi network. What do you need for:
- Name or SSID – those so that everyone can see your network.
- Password - 8 characters long - which you need to enter to connect to Wi-Fi, so that other neighbors cannot connect.
- Encryption – WPA/WPA2 – and more. The best passwordless methods and WEP.
After this period you can request. Let's go!
Change password
I’ll just post it here as a guess. If you have already set a password before connecting to Wi-Fi, then there is nothing left to connect to before setting up the router, or the password is lost to the standard one.
Please change your mind! Otherwise, any correspondent may be able to connect to you and activate the replacement of sites!
At this stage, the router installation process can be completed! Show yourself and be happy. If you are not solving any problems, read on and write your story in the comments.
Possible problems
Your most common problems from our readers:
- It doesn’t connect to the router - try on another computer or phone, try resetting everything, checking the correct cable connection. In the extreme case, the router should be reset (press and hold the RESET button).
- If the password doesn’t match, you can’t renew it because you don’t know it and nothing is similar, you’ll have to reset the settings and install everything again.
- There is no Internet connection - check the connection type (set to PPPoE), check that all devices do not have it, call your provider.
Axis and all problems. As if I forgot, write lower. And that’s why we say goodbye!!
The technology of dartless measures has greatly advanced into the life of modern people. We constantly hear such words as Wi-Fi, router, 3G and others, as well as those otherwise associated with Internet technologies. You can use the Internet practically everywhere: in stores, in transport, in cafes and restaurants, in large towns that have dart-free access points, but if you have had a bit of fun, you can organize home wifi internet, so that it would be possible to connect to the Internet in any part of the apartment. It’s not at all difficult to earn money, and the hard work of getting started can only be spent every day.
Features of the organization of a dartless survey
When connecting to a WiFi access point, it is important that you are able to connect to the global network and access the Internet. This is not entirely correct. Droneless connection – the connection of computers and other devices to a local data network, such as via cables. The importance lies less with technology. Naturally, the combination of home resources with the resources of the Internet provider and access to the Internet will be an additional benefit, but this is far from the only area of stagnation of home WiFi. Like a butt, if you're a vikorist home Wi-Fi Only for internal needs, by organizing a media server on which films, music or photographs are stored, and to which all home networks can be connected for viewing.
In order to create a drone-free network for your home, consider purchasing inexpensive access points or Wi-Fi routers. When organizing a dartless survey, it is necessary to take into account a number of factors:
- transmission speed in the middle of the track;
- protection against unauthorized access;
- radius of the access point, then. transmission tension;
- expansion of the access point near the apartment.
With medical professionals, it is possible to organize a drone-free measure with maximum efficiency. A very important point is the correct placement of the transmission at the location. As a dart line is organized, the device and computer are connected via additional wires, and the liquid of the connection drains from their liquidity and drain. With dartless hems, the pieces are more foldable. The radio signal is transmitted over the air, and when it is widened, interruptions may occur. They may lie due to the material and thickness of the walls, the processing material, the ease of transfer, and may also be affected by the type of objects that are in the apartment.
The optimal location for placing the router is approximately in the middle of the apartment and as close as possible to the ceiling. Call this place in the corridor, in the equally distant room. Such placement will ensure an even distribution of the signal throughout the entire area. Of course, you can place the router on the table or system unit in one of the rooms, otherwise you won’t notice that the signal will be loud throughout the entire apartment.
Transmission speed may vary depending on the selected WiFi standard - 802.11b/g/n. Current models of routers and mobile devices support all communication standards. The standard with the n index has a speed of up to 150 Mbit/s for ideal minds. Also, take into account the fact that as soon as a client connects to the router that does not support standard n, and for example, 802.11g, then automatically all devices will automatically switch to operating in this mode. Use speed up to 54 Mbit/s.
Connecting and setting up the router
Request that all Internet providers provide their clients with wired Internet access. This means that twisted steam is laid into the apartment from the provider’s ceramic candle into the client’s apartment. With this function, the provider is not given access to the Internet or to the resources of its network. There are not many providers that provide services to their clients such as configuring routers, organizing home monitoring, and such services are provided on a paid basis. Let's get real home wifi internet It’s simpler, it doesn’t seem that way. For this purpose it is necessary to follow the current algorithm, which will come up with the most losses:
- Internet access is configured, depending on the settings you see with your provider;
- An Internet TV station (IPTV) is being configured if such a service is provided by the provider;
- The drone connection is adjusted (behind the Great Rakhunk, internal IP addresses are changed);
- Setting up the drone-free connection by entering the access point ID and security settings is in progress;
- The password for entering the router configuration page is changed;
- access policies are configured, such as port forwarding, access to resources and other servers.
The adjustment of the skin router is completely individual, but the description above is a robotic algorithm suitable for each of them. Since the router is not new, but has already been tested for connection, before configuring it is necessary to reset the configured configuration to the factory settings. On each router, you will have to press and hold the “Reset” button for 10-15 seconds. This button is located on the rear panel where the sockets for connecting cables are located. On some models, the reset button may be located at the bottom. To understand that the configuration has been reset, please look at the life indicator on the front panel. Vin is guilty of often blaming.
However, it is not necessary to enter the address in the browser in order to access the settings page, just turn the router over and “peek” at this information. A card or sticker is attached to the bottom, on which is written the router address, username and password for access. There is also information about the device address, which may be needed if the provider filters clients by MAC. Detailed configuration of routers with specific configuration applications can be found on the Internet or on this site.