Samsung Galaxy Grand Max was presented in Korea. Bluetooth is a standard for the secure drone-free transfer of data between different devices of different types on small distances

Information about width - respect the horizontal side of the device for its standard orientation during installation.

Information about height - the vertical side of the device is taken into account for its standard orientation during installation.

Information about the organization of communion in various units around the world.

Information about the device of extinction in various units.

I’ll arrange a closer arrangement, pay for the adjustment of the dimensions, given by the virobnik. Place it up to the structures with the shape of a rectangular parallelepiped.

Information about the products in which this device is represented.

GSM (Global System for Mobile Communications) has been split up to replace the analog mobile network (1G). Therefore, GSM is often called the 2G mobile network. It is enhanced by GPRS (General Packet Radio Services), and later EDGE (Enhanced Data rates for GSM Evolution) technology.

UMTS stands for Universal Mobile Telecommunications System. It is based on the GSM standard and supports 3G mobile networks. The expansion of 3GPP has the greatest advantage of providing greater flexibility and spectral efficiency to W-CDMA technology.

LTE (Long Term Evolution) is defined as a fourth generation technology (4G). It has been divided into 3GPP based on GSM/EDGE and UMTS/HSPA in order to increase the capacity and flexibility of drone-free mobile communications. A further development of technology is called LTE Advanced.

A system on chip (SoC) integrates various hardware components, such as the processor, graphics processor, memory, peripherals, interfaces, and the software required for their operation.

Information about the technological process, such as the production of chips. The size of nanometers represents half of the distance between the elements in the processor.

The main function of the processor (CPU) of a mobile device is the interpretation and interpretation of instructions contained in software programs.

The capacity (bits) of the processor is determined by the size (bits) of registers, address buses, and data buses. 64-bit processors are more productive than 32-bit processors, which are also more productive than 16-bit processors.

Instructions are the commands that the software uses to set/execute the processor's work. Information about the instruction set (ISA), which processor can be installed.

Each processor has L0 (level 0) cache memory, access to some is lower, lower to L1, L2, L3, etc. The benefit of having such a memory is not a loss of productivity, but a reduction in energy consumption.

The cache memory is vicorized by the processor to speed up the hour of access to data and inserts that are often vicorized. L1 (Rank 1) cache memory is used in small quantities and is more efficient than both system memory and other cache memory levels. If the processor does not detect data that is fed into L1, it will continue to search for it in L2 cache memory. With any processors, this sound occurs simultaneously in L1 and L2.

L2 (Revenge 2) cache memory is larger than L1, but it is combined with a large capacity, which allows caching of a larger amount of data. Vaughn, like L1, has a lot of system memory (RAM). If the processor does not detect data to be loaded into L2, it will continue to search for it in L3 cache memory (as it is obvious) or in RAM memory.

The processor core writes program inserts. There are processors with one, two or more cores. The presence of a larger number of cores increases productivity, allowing for the parallel execution of rich instructions.

The clock speed of the processor determines the speed of cycles per second. It is measured in megahertz (MHz) or gigahertz (GHz).

The graphics processor (GPU) processes various 2D/3D graphics applications. In mobile devices, most often games, user-friendly interfaces, video add-ons, etc. are used.

The speed of a robot is the clock frequency of the graphics processor, which ranges from megahertz (MHz) to gigahertz (GHz).

Random access memory (RAM) is used by the operating system and all installed programs. The data that is saved in the RAM is spent after the device is turned off or restarted.

Information about the type of random access memory (RAM) used by the device.

Information about the number of RAM channels that are integrated into the SoC. More channels mean higher transmission speeds.

The frequency of RAM indicates the speed of the work, more specifically, the speed of reading/writing data.

One of the main characteristics of the screen is the technology behind which it is produced and which contains the power of displaying information.

For mobile devices, the screen size is expressed using an additional diagonal measured in inches.

Approximate screen width

Approximate screen height

The ratio of the dimensions of the long side of the screen to the short side

The separate size of the screen shows the number of pixels vertically and horizontally on the screen. Higher separation means clearer detail in the image.

Information about the number of pixels per centimeter per inch of the screen. This greater strength allows information to be displayed on the screen in clearer detail.

The screen color depth reflects the total number of bits available for color components in one pixel. Information about the maximum number of colors that the screen can display.

Approximately the area of ​​the panel is occupied by the screen on the front panel of the device.

Information about other functions and screen characteristics.

The types of lights that are most often found in cameras of mobile devices are LED and xenon lights. LED lights provide softer light and are used in contrast to bright xenon lamps and are used for video recording.

One of the main characteristics of cameras in mobile devices is their separation, which shows the number of pixels horizontally and vertically in the image.

Information about the maximum separation between video recording hours and the device.

Information about the maximum number of frames per second (fps) that is supported by the device per hour of video recording with the maximum separate location. The basic standard rates for renting and creating video are 24p, 25p, 30p, 60p.

Information about other software and hardware features related to the main camera and enhancing its functionality.

This is a version of Bluetooth, which makes the skin more flexible, softer, cooler, and makes it easier to connect devices. Information about the Bluetooth version of the device.

Bluetooth uses different profiles and protocols to ensure faster data exchange, energy savings, reduced device detection, etc. The activities of these profiles and protocols that the device supports are shown here.

Information about the main characteristics and standards that are supported by the browser device.

Battery capacity shows the maximum charge that can be stored in milliampere-years.

The type of battery is determined by its structure and, more precisely, the chemicals used. There are different types of batteries, with lithium-ion and lithium-ion-polymer batteries used most often in mobile devices.

An hour of use in 3G is the period of an hour for which the battery is completely discharged during continuous use in 3G.

Information about the additional characteristics of the battery will be included.

The SAR level indicates the maximum amount of electromagnetic radiation to which the human body is exposed when holding a mobile device with the ear in a conversation position. In Europe, the maximum permissible SAR value for mobile devices is limited to 2 W/kg per 10 g of human tissue. This standard was established by the CENELEC Committee in line with the IEC standards for the addition of ICNIRP indices since 1998.

Rhubarb SAR indicates the maximum amount of electromagnetic radiation that the human body is exposed to when using a mobile device on the same level. The maximum permissible SAR value for mobile devices in Europe is set to 2 W/kg per 10 g of human tissue. This standard was established by the CENELEC Committee for the addition of ICNIRP clauses since 1998 to the IEC standards.

Rhubarb SAR indicates the maximum amount of electromagnetic radiation that the human body is exposed to when using a mobile device in the ear. The maximum value, according to the USA, is 1.6 W/kg per 1 gram of human tissue. Mobile devices in the US are regulated by the CTIA, and the FCC conducts tests and sets their SAR values.

Rhubarb SAR indicates the maximum amount of electromagnetic radiation that the human body is exposed to when using a mobile device on the same level. The most acceptable SAR value in the USA is 1.6 W/kg per 1 gram of human tissue. These values ​​are set by the FCC, and the CTIA monitors the compliance of mobile devices with this standard.