When you try to write files to a flash drive, you may notice the warning “Disk theft on write.” This can happen for any number of reasons, even before the accumulator breaks down, but most often the reason is safety.
In some cases, there is no risk of being infected with viruses. All described methods must be configured with administrator rights, and they do not work on work office computers unless the settings are recorded by the system administrator.
All types of flash drives (USB and SD) offer physical protection against recording. It’s important to look at the flash drive, it’s possible that it has a jumper labeled Lock and if you find it, then reset it. 
This type of protection is the most effective for protecting files on flash drives from viruses. This will help you not only protect files from viruses, but also prevent viruses from spreading.
On some computers, you can keep track of write protection and access to the Windows registry. It’s very easy to fix:
The StorageDevicePolicies section can be used daily and you can create the following:
After working with the registry, you must restart your computer so that the changes take effect.
Please register for assistance with group policies
As with the Windows Registry, this method of erasing entries is most often associated with a virus. I don’t know why the virus would block writing to the disk, it’s for everything, just for the sake of being generous.
In order to change the settings, you need to restart your computer.
Please register for the additional registry
If the registry method doesn’t work, you can immediately try to remove the protection from the disk using the “Diskpart” console command:
Done, now the fees for recording the disc have been removed.
How to obtain recording protection from Transcend flash drives
Transcend has created a cost-free software product that eliminates the problems with these flash drives, including the problem of “disk write theft.”
It doesn't help anything
If nothing helps and you still see the “Disk theft on write” warning, then try to find a specialized update program on the flash drive manufacturer’s website.
Sometimes flash drives just die with such mercy, hurry up and buy a new one, since you’ll be wasting pennies.
The era of floppy disks has already sunk into oblivion, and now people everywhere are using the hoarders of the new generation - flash drives. This device is compact and can accommodate a large amount of data. Also, the flash drives are far from complete. When working with flash drives, a variety of problems often arise. For example, the most widespread damage is associated with the fact that during the hour of work with the OS information, the “Disk of write thefts” is written. What does this mean and how to remove security from a flash drive for recording? Let's talk about this in this article.
You can protect your flash drive from your hardware or software. Moreover, there are no ways to remove the protection from the recording. Let's talk about the skin in more detail.
If you don’t know how to steal a memory card or flash drive, you’ll immediately damage the device’s case. The most obvious root of the problem is mechanical protection. Each MicroSD card and several flash drives have a special switch on the case. This indicates that the write protection has been activated. Chantly in the teeming environment, the peremikach changed its position, which led to problems. Correcting everything is very simple. It is also necessary to change the position of the transfer pump. 
Finally, it’s time to check the usefulness of the flash drive. For this purpose, try connecting it to a different port. Or better yet, try saving money on another PC, since it is possible. If everything is fine, then the problem is with the PZ.
PP problems
If the device is working correctly and the mechanical switch is in the correct position, you need to know how to remove the protection from the disk by software. There are many ways to earn money. Let's look at their report.
Format NTFS
Typically, the flash drive is formatted in FAT32. This file system has one limitation, which few people know: the maximum amount of data that can be recorded does not require exceeding the 4 GB limit. The situation is ambiguous when going out. On one side, writing is allowed, but on the other side, uploading a large file to a flash drive via FAT32 is not possible.
To remove write protection from a flash drive, you need to format the drive and change the file system from FAT32 to NTFS. There is no need to worry about recording data. That's why I'm talking about how to unlock a flash drive by itself. To change the file system, you need to connect the storage device to your PC and go to “Computer”. Before formatting the flash drive, save it to your PC. 
Find your device there and click on the new RMB. From the list, select the “Format” item. A new dialog will open, in which the “File system” text must be set to NTFS. Once you have finished, press “Start”. The formatting process will start, during which all data from the storage will be deleted and the file system will be changed to NTFS.
It is recommended to remove the flash drive from the USB port through a secure connection. If we talk about NTFS, then this is not a recommendation, but a general rule, which you definitely need to follow. If you have a protracted illness, you risk damage to your device.
Windows Registry
It’s no secret that the registry is a magic wand for any Windows user. In this section, you can find any problem. Blocking the accumulation of data is not a bad thing. How to fix the problem? To remove security from a flash drive or microSD, you need to carry out the following manipulations:
In some cases, the StorageDevicePolicies section may simply not be defined on your PC. How can you remove the protection from a flash drive in such a situation? Just create StorageDevicePolicies manually. Right-click on the first directory (our option is Control), then click “Create” in the menu, and then select “Create”. The system prompts you to send your name. We enter StorageDevicePolicies there, after which the partition is created. 
Then you need to go to the directory that has appeared and right-click on the menu that is right-handed. In the list that has appeared, click on “Create”, after which we select the “DWORD Value” option. The bitness characteristic is selected depending on your system (64 or 32 bits). The new parameter is called WriteProtect and its value is set to 0. Again, we reset the PC and check whether information is being written to the flash drive.
Group politics
If disk theft and repair through the registry were not successful, you need to check the group policy. It is possible that she herself will not write down the data on her nose. To verify the policy, you need to do the following:
Command line
The devil's way to detect security, if the flash drive is stolen as a write, is in contact with the command panel. To ensure that your flash drive works correctly, follow these instructions:
After all the above descriptions of the information about those that the flash drive is stolen from the record, there is no longer any need to bother you.
Software security
Flash storage developers publish information about their clients, create special utilities, and specifically update problematic devices. If you are faced with the fact that the flash drive is not formatted, not written, then try using a proprietary program. It is important to note that when choosing software to update the functionality of a flash drive, you need to pay respect to the manufacturing company. If you are using devices from Transcend, you will need a program called JetFlash Recovery, owners of Silicon Power flash drives will need to use USB Flash Drive Recovery, etc. You can download the utility on the official website of the manufacturer. 
In addition, there are no third-party programs that can also solve problems with recording. Among such utilities you can see D-Soft, Flash Doctor and others. As a rule, the process of updating a flash drive with the help of these programs is simple and straightforward. You need to adjust the formatting parameters and click on “Start”. Once the cleanup is complete, the flash memory protection is deactivated and you can write various information to the device.
Virus
If you don’t use more reliable methods, then the root of the problem is the useless security program that has “settled” on your savings account. There are a lot of viruses in the vastness of the world. And their actions block recording to the flash drive.
What to do if there is a virus on hoarders? Use one of the current antiviruses for help. Verify the disk and then remove potentially unsafe files. After this, the problem with the recording may arise.
SD cards can be used in cameras and older phones. These memory cards may be write-stolen - they simply cannot be formatted unless the following utilities are installed.
SD cards are connected to the computer via an adapter. As a rule, you can change the settings like Lock - a little lower than the circles in red.
Check that the lock is in the unlocked position and the card is not mechanically blocked. It is possible that a simple muffle of this button can remove the blocking, and you will not have to worry about the program. If the card is still stolen as a record, you need to go to Windows utilities.
Removing blocking from a flash drive via diskpart
One of the simplest ways is to use the console utility diskpart, which can be used to manage connected disks. You can click through the command line.
- Open the Start menu (Windows 7) or go to the Search row from the Taskbar (Windows 10). Type cmd and open the command line.
- Enter "diskpart". Open a new window from the utility.
- To display a list of disks (and flash drives), set "list disk". All available accumulated data will be redrawn on the screen.
- Find your SD card among the designated disks and enter the command “select disk n”, where n is the number of the required flash drive.
- To format the data, enter "clean". If you didn't succeed the first time, try again.
- We recommend using the “active” command to activate the flash drive.
- Also vikorize the format in NTFS using the additional command format fs=ntfs. The screen will show how many hundreds of memories have been formatted.
See the memory card for help diskmgmt.msc
Another program installed on Windows is diskmgmt.msc. This is suitable for formatting flash drives, memory cards and hard drives.
To open the utility, go to the “Viconati” menu - the easiest way is to use the additional key + [R]. You can also set "viconati" in a row to search and vibrati the first result.
- In the input field, enter the name of the utility diskmgmt.msc and click OK. Wait until you have completed obtaining information about the configuration of available drives.
- Find your memory card in the list, click on its name with the right mouse button and select “Format”.
- If item 3 is not available for formatting, proceed step by step: first click “View Volume”. Then select the same flash drive and the “Create Volume” command.
- In the new window, fill in all the settings and click “Next” until the SD card is formatted.
How to format a memory card on your phone
If you need to delete all files from the microSD or SD card on your mobile device, you can do the same without connecting the card to your computer. All you need to do is go to the settings of your smartphone and find out the required items.
 |
 |
 |
The names of the menu sections in different Android shells are quite similar, so you can use this approach as a basis.
- Unlock “Adjustment” of your smartphone.
- Go to “Memory” and go to the “Famous Accumulator” section. Here you will see how much memory is already occupied on the card and how much is available.
- Select “Format”. The previous page will open and all data on the CD card will be deleted. Once you have made your decision, click the “Clear and Format” button and finish deleting deleted files.
Porada: Before formatting the memory card, create a backup copy of the data stored on it. To save photos and videos, you must manually use Yandex.Disk - this terrible beast allows you to costlessly and unlimitedly capture videos and photos. You can find a look at some good crappy programs from .
I’m wondering about the title, but I’ll ask you this way, if when working with a USB flash drive or SD memory card, Windows informs you about the “Disk write theft” error. Take protection or speed up with another disk” (The disk is write-protected). In this instruction I will show you a number of ways to remove security from a flash drive or memory card and we will recognize the signs.
I would like to point out that in various cases there is information about the fact that disk write thefts can occur for various reasons - often through a Windows setup, or sometimes through a zipped flash drive. I will touch upon all the options and suitable methods for removing the lock in Windows 10, 8.1 or Windows 7. Since this did not appear to be entirely reasonable, there is a statistic and a video at the bottom, which demonstrates all the ways to fix the problem. Ilku.
Another way that can help you get rid of the USB drive, which immediately shows the problem at the time of recording, is to remove the protection from the command line.
For whom should you sign these actions:
- (In Windows 10, it is easiest to work through search in the command panel, in Windows 8.1 - through the right-click menu on the Start button, in Windows 7 - through right-clicking on the command row in the Start menu).
- In the command line enter diskpart then press Enter. Then enter the command list disk And find your flash drive in the list of disks, you will need its number. Enter offensive commands by pressing Enter after the skin.
- select disk N(de N the number of the flash drive from the front croque)
- attributes disk clear readonly
- exit
Close the command line, turn off and reconnect the flash drive, then try to do something with the flash drive, for example, format it or write down any information to check if there was a problem .
Disk theft on record - solution for flash drives Transcend, Kingston, Silicon Power and others
Video instructions
Below is a video of this process, which shows all the descriptions of the best methods. Perhaps we can help you resolve your problem.
I hope one of the approaches will help you solve your problem. However, I also recommend checking your flash drive on another computer or laptop: in order to determine whether it is protected from recording the system parameters or the storage device itself is to blame.
Read what to do, because when you try to format a flash drive, memory card or hard drive, you will see the notification: “The disk is write-protected.” And also, how to properly remove the security and unlock any device that you cannot create or copy files to a flash drive or memory card, because the device is not write-protected.
Whenever you are copying or creating files on the device, you will receive a notification: You need permission to complete this operation.
Otherwise, when you try formatting, you will see a notification: You do not have enough information to complete this operation.
Next, you need to remove the protection from the device entry in the Windows Local Group Policy Editor:
- Run the sign out command, enter gpedit.msc and press Enter.
- Go to section “Computer Configuration” - "Administrative Templates" - "System" - .
- Turn on the power "Knowledgeable discs: protect the recording". For which day, click on the new one, set the value Vimkneno and press OK.
- Repeat these steps for the section "Koristuvach Configuration" - "Administrative Templates" - "System" - “Access to important buildings”.
After completing these steps, try creating a file or folder on a flash drive. If this helper didn’t tell you, watch our latest videos about fixing flash drives.