How to unlock Windows 10 if you forgot your password. I forgot my Windows password: I'm breaking my password! Access to Microsoft cloud account is denied

Some Windows 10 clients forget the password for their account. To renew access to it and go to the “Desktop”, you need to remove the old combination and install a new one.

How to reset password on Windows 10

Any user can make the old password invalid without installing Windows 10. Today we will look at all possible methods.

If you enter the wrong combination of characters, the system displays a notification that the password is incorrect and prompts you to enter it again

Before following the instructions below, you must go to the next step:

The Caps Lock button is disabled. You can convert characters to uppercase, so that if it is active, you can type capital letters. Please note that on the keyboard of desktop computers there is a special indicator for this key. As soon as it burns, squeeze it in (press it once). On laptops there is no indicator, so try pressing the button and entering the password again.
The required keyboard layout is set for the text to be typed. If it doesn’t match your password’s characters, press the Shift + Alt key combination to change it. The movie icon is also located in the lower right corner of the login screen. You can click on it with your bear. If you need a layout, try to guess the possible secrets that you could use to guess the password. If the same options come to mind, go to the methods described below.

Change the password for your account online

This way of solving the login problem will only be the same as if you were previously working on the device through a Microsoft cloud account. If you haven’t registered it or you have one, if you use your PC simply as a local account account (that is, a separate cloud account, not related to the Microsoft cloud account), this method of sending a password will not work for you - the next step will go straight to you. and other methods . So, how can I change my password online on the Microsoft website?

Let's go to this post and go to the official Microsoft website. You will immediately be asked why you are not allowed to go into the register. We put a round left-handed icon under the first option “I don’t remember my password.” Whose name is embossed on Dali.
Please indicate the reason why you cannot access your Microsoft account
Now in the first field you enter your email address or phone number to which the account record is associated. In another field, you need to add a set of characters (captcha) from an image that consists of Latin letters and numbers. If you cannot see them, press “New” or “Audio” so that the system replaces the dialing or removes it. We enter and press on “Dali”.
Enter your email address or phone number in the field.
A sheet with a special code will be sent to your email, so you will have limited access to the email screen. Open it and find a sheet in Microsoft Live (this may be done in just a few steps). Copy the code or just remember it and write it in the appropriate field on the Microsoft website. Click now on “Dali”.
Enter in the field the code that is best for you in the provided email
Two new fields will appear, requiring you to enter a new password. Another field is required for your confirmation. Remember it clearly, or better yet, record it in a notebook to which only you have access. After entering, click “Next”.
Enter a new password for the first field and repeat it for the other field
On the next page you will be notified that your password has been successfully changed.
You are notified that access to the cloud account has been successfully updated

Now you can log in to your cloud account and use a new combination.

Enter a new password for your account in the field

Video: changing a forgotten password for a Microsoft cloud account

For one piece of installation disk or flash drive

For this method, you need a device (CD, flash drive, etc.) with the Windows 10 distribution installed. We will install the system through the new one and then use the following steps to change the password for the account. Let's move on to a detailed description of the manipulation:

We connect the computer. If you are more interested, enter the BIOS using the additional Delete key. The button to enter this menu may be different: everything is stored under the PC model. You can find information about this button on the device's manufacturer's website or in the operating instructions that came with the device if the Delete key did not work.
In the blue BIOS menu, in the First Boot Device parameter, you can set the version of the device where the Windows distribution is located.
Install a device with Windows distribution from First Boot Device
Connect the storage device with Windows 10 distribution to the laptop. If there is a disk, insert the disk drive. Restore your computer.
If you are interested, select my installation and immediately press two keys on your keyboard: Shift + F10. This command can open the editor we need, the “Command Row” icon.
If it does not appear on the screen, add the Fn key to this combination. If I didn’t ask again, we click on the message “System Update”, located in the lower left corner of the screen.
Click on the message “System update”
Now we select another section under the title “Search and resolve problems.” Press “Search for troubleshooting” to go to the “Team Row”
In the next window, select the “Additional parameters” item. The offensive deadline is the launch of the “Team Row”.

Now let's move on to the commands that need to be added to the black editor once it has started. Let us briefly describe the procedure:

Another word in the row is diskpart. We press on Enter. After this, enter the list volume command. Your task is to remember the letter of the hard disk on which your OS is installed, so that the fragments will always be the “C:” drive. This letter you have given you to enter on the basis of all upcoming commands. To complete the first diskpart command, type exit and press Enter on your keyboard.
Connect using the commands diskpart and list volume
We are not saying goodbye to the “Team Row”, because in the new we will need to send away a few more teams. The first step will be move c:\windows\system32\utilman.exe c:\windows\system32\utilman2.exe. Copy them using the context menu or the Ctrl+C key combination and paste them into the black editor. Press Enter to exit.
Another command is available: copy c:\windows\system32\cmd.exe c:\windows\system32\utilman.exe. We also copy and paste in the editor, and then stamp it with Enter.
Follow two commands in the “Team Row”
Now you need to restart the device. Another option for this is the wpeutil reboot command in the editor. It’s no longer necessary to make copies here, because it’s short and you’re unlikely to get a deal. You also have the right to reactivate your device in another way.
This time I'm obsessed not with accumulating the Windows 10 distribution kit, but with the system disk.
A window will appear with a field for entering a password. Here we click on the “Special capabilities” icon located in the lower right corner. I want to start the black editor we know for entering commands.
Re-open the command row after restarting your PC
Another thing in the window is this: net user has a new_password. To run the command, we will follow the tradition with Enter. Since the name of the koristuvach, that is, your cloud record, consists of not one, but many words, you need to take it into your paws.
If you, unfortunately, do not know what names you have in the system, use the net users command to become familiar with the transfer and select the required account entry.
After entering the command, the system will ask you to enter a new password twice. Another thing we immediately press on Enter. Please note that while you are typing, the characters will not be displayed. This has been fragmented due to carelessness. Now you can close the command row.
Enter two new passwords: first in one row, and then in another
After setting a new password, you can immediately log in to your account on your PC.

Video: setting a new password for additional installation media

For additional help from the “Team Row”

This method is suitable for such versions of Windows 10 as “Professional” or “Corporate”. This method cannot be used for other options. If you do not have a Microsoft cloud storage or installation flash drive or disk, this instruction will be one of the best options for you.

The biggest problem occurs when logging into the system through the administrator account and changing the password in the “Computer Access” window. Let's talk about the crumbs in detail:

Launch the black editor "Command Row" on your PC, along with the following instructions from the section "For storing the installation disk or flash drive" according to the article. Zocrem needs to be clicked on the “Special abilities” icon.
This time we will enter different commands. First of all: net user Administrator /active:yes. Please note that for the English version of Windows 10 you need to enter the English word Administrator, not the Russian one. We insert the command and press Enter.
Insert the command net user Administrator /active:yes into the command line
After these actions, another account record “Administrator” will appear in the lower left corner. Go through her. There is no need to enter a password here.
Enter Windows for the additional cloud account “Administrator”
Now click with the right mouse button on the “Start” button at the bottom left corner. From the large list of options, select the “Computer service” section. Select “Computer service” from the context menu
Finally, once launched, on the left side, find the item “Local accounts and groups” and click on it.
Open the section “Local community groups”
On the right side of the window, click on the sub-click to launch the “Koristuvach” folder. I’m telling myself (my cloud record) at the crossroads. Click on this item with the right button. In the small menu you can select the option “Set password”.
In the context menu of the item that corresponds to your account, click “Set password”
Read the system notification from the previous ones and click on “Continue”.
We read ahead and press on to “Continue”
Another new password is saved. Now you can log in to your account using a new combination.
In the new window, enter your password and click OK
After restarting the computer, on the login screen, open the command line again and enter the command net user Administrator /active:no in the black editor so that the administrator's cloud account appears in the list of available ones.

Vikoristovuyemo “Registry Editor”

You can replace the old password with a new one using additional special manipulations in the “Registry Editor” window. Let's look at this method of reporting:

We log in again to the system under the account “Administrator”, as described in the section “Behind the “Command Row”” section of this article. We open the “Command Row”.
In the editor, enter the word regedit. Just launch the Registry Editor we need.
At the left side, the third header HKEY_LOCAL_MACHINE is finally opened.
Click on the HKEY_LOCAL_MACHINE folder on the left side of the window
Now let’s move our tribute to the top panel of the window and stamp it on “File”, and then on “Enchant”.
Click on the “File” section and select the “Enter” option
In Windows Explorer, we look for the config folder, and then the SYSTEM. Now click on “Unlock”.
Select the SYSTEM file and click on the “Open” button
We write the full name of the field “I am divided” in Latin letters. Click on OK.
Add more information to the field and press OK
Go to the folded tab and open the Setup folder.
Open the Setup folder in your favorite place
Look for the CmdLine parameter. Click on the new file and change the value to cmd.exe.
Change CmdLine values on cmd.exe
At the crossroads, we also find the SetupType item, open it and set the value to 2.
On the left side of the window, click on the creations you previously separated with the left mouse button. Now click on “File”, and then on “Vivantage the Tabernacle”. After this, confirm your action.
Click “File” again, and then select “Vivantage”
Re-enable the device. When the lock screen appears with a password field, a command line will appear. In the editor, enter the following: net user user_name user_pswrd. This command has user_name – the name of your cloud account, and user_pswrd – your new password.
Enter the command net user and add a new password to the name row of your account account
Now enter the exit command to exit the black editor and turn to the login window. We write a new password and go to find your account account.
Enter the exit command and press Enter to exit the “Command Row” and enter a new password in the login field

Reset the password for an additional program to update the cloud record

If you do not have an installation drive with the Windows distribution, you can use a special password update program on an empty computer and log in from there to change the password. Programs are images of the backup disk.

They need to be stored and simply transferred to an empty storage device (disk or flash drive). Since you can’t make anything on your computer, you will have to ask someone to record the image.

Offline Windows Password & Registry Editor: a cost-free utility without an interface

Offline Windows Password & Registry Editor is a cost-free way to secure your disk. The main feature is the presence of a graphical interface. To operate the utility, you must enter commands from the keyboard.

The Offline Windows Password & Registry Editor program does not have a graphical interface: all commands are entered from the keyboard in a black editor, which is similar to the “Command Row”

What are the characteristics and functions of the program?

find out all accounts of accountants, whether they are blocked or disabled;
resets the “Administrator” password;
upgrades access not only to local cloud records, but also to Microsoft cloud records;
Works for all versions of Windows;
supports 32-bit and 64-bit systems;
edits the Windows registry (for example, removing viruses from AutoVan).

You can download the program directly from your official page. To create an image of a CD or USB disk, you need to protect the surrounding files. Each of them is only 18 MB.

Recover My Password Home Edition: free version with English interface

The Recover My Password Home Edition program has been developed by Lazesoft. It has a user-friendly and simple interface, but only those who know English can use it: there is no Russian version. Plus programs for the fact that it’s cost-free.

The interface of the Recover My Password Home Edition program is not translated, unfortunately, by the Russian language

What are the advantages?

Suitable not only for “ten”, but also for other versions of Windows, such as XP and Vista.
Supports both 32-bit and 64-bit systems.
Allows you to create not only Flash and CD images, but also ISO images, optical disk images that are saved in the original file.
Works on all laptops, including Legend, Toshiba, Dell, IBM and others.
Renews access to the local cloud account Administrator.
Your program stores only 33.4 MB.

You can purchase this image of the vanity disk from the official website of the retailer.

Renee Passnow: paid, but a manual program

The Renee Passnow utility is a paid disk backup option. The principle of this work is to bypass the Windows local cloud account password by changing the encrypted password in the Sam registry file.

The interface of the Renee Passnow program is very simple and intuitively clear: newbies can figure it out

What are the program's capabilities and advantages?

does not delete data that is saved on the PC;
converts the Microsoft cloud account to a local one, and then deletes the password;
It has a smart and simple interface in Russian;
Suitable for all versions of Windows, including XP and Vista;
creates backup copies of data that are saved on hard drives without Windows;
erases information from stored storage devices either completely or section by section;
Updates Windows after DBR or MBR changes at the hour of OS startup.

The downside of the utility is that you can see the functionality of the free trial version. In addition, you will not be able to reset your password: you will no longer be able to find the type of records on your PC. The price for the main paid version is 1290 rubles, and for the professional version – 1790 rubles. The distribution package contains 95 MB.

You need to purchase this valuable utility from the official website of the retailer.

Open the floppy disk to reset the password

Using the new Windows features, you can create a floppy disk that allows your new computer to delete the old password from your local storage account at any time. The big disadvantage of this is that the floppy disk (file) needs to be stored on a separate carrier (disk or flash drive) away. With this method, the user enters the current password, which the user remembers.

A floppy disk is only relevant for the computer on which it was recorded. If you do not remember your password and you do not have a standard floppy disk, this method will not solve the biggest problem for you because you cannot create it without access to the storage record. In this situation, it is important to sign up for the use of special utilities from third-party vendors, described in this article.

So, how do you create a floppy disk to install a new password and then use it?

Insert the disk or connect the flash drive to the computer.
Launch the “Career Panel” through “Search Windows” (the icon looks like a magnifying glass on the “Career Panel”). Just enter a suitable entry in the search field. Enter the title “Caravan Panel” in “Search Windows”
Now launch the block “Oblikovy records of koristuvachs”.
Press the message “Oblikov’s records of koristuvachs”
In the window you will find the message “Create a floppy disk and reset the password.” You'll be third. Click on it so that a window called “Forgotten Password Master” opens on top of the “Control Panel”.
Select the message “Create a floppy disk and reset your password” on the left side of the window
We read the information about the option and press the “Next” button on the other side.
Click on “Next” on the start page “Master of forgotten passwords”
In the additional menu, select a flash drive or disk like a new floppy disk.
Select from the drop-down menu the required device that you previously connected to the PC
Another exact password is in the cloud record and click the left button on Next.
Write the exact password for your account account
After you need to check this, the creation of the floppy disk will complete. When it is 100%, click on “Dali”.
Now you can use this store as a method for renewing your password in the future.
At the final stage, click on Done.
After all actions, a file called userkey.psw will appear on the device. You will have the standard Windows utility for updating your password. You can save up your password many times to update your password.
If you need to change your password, connect the storage device containing the password disk. Enter any combination of characters in the field.
A message will appear on the screen indicating that you entered the wrong password. The system prompts you to send it again. Embossed on OK.
Under the field for entering the combination, you will still need to send the message “Reset password”. Just click on them and select the simplest actions described in the instructions.
Click on "Reset password"

We reset the password on tablets and smartphones with Windows 10

To change the password on a Windows 10 tablet, you can use the same algorithm as your computer. Only the device in this case is based not on the disk, but on the original SD-carrier.

For phones and tablets, there is also a method for resetting your password online, so you can change the password for your Microsoft account on the official website of the company.

Skidannya nashtuvan Hard Reset

To recover the old password on Windows 10 phones and tablets, such as Lumia or Nokia, use the Hard Reset option. Vaughn lies in the removal of all adjustments to the factory settings, so that they are as quiet as you had immediately after purchasing the device.

The method has a big drawback: you will see all the special information (files, photos, games, contacts, music) that was stored in the internal memory of your smartphone or tablet, so before performing the operation, everything that was on the device must be transferred to it shiy nose. Before unlocking the phone, remove the SIM card and SD card with data on them, and also charge the device at least 50%.

Let us briefly describe the procedure:

If you don't remember the password for your account in Windows 10, you can delete it and set a new one. In this case, there is no need to reinstall the operating system: there are many other ways. If you do not have an installation disk with the OS distribution kit, select the “Command Row” method, either by logging in to the system using the local “Administrator” account, or creating a unique tool, a vikory tool, or a special utility.

Like the previous version of the OS, Windows 10, when logging in to the account, offers two ways to authorize the user - through the Microsoft cloud account and through the local cloud. It is also clear how to reset the administrator password in both types, if you forget it, and how to create a disk, a special flash drive, or another device that can be used to update the storage data.

The most effective and most secure way would be to reset your password using Windows Password Reset Ultimate.

Changing the password for a local account

To reset your Windows 10 user password, you will need an installation and backup disk. You need to enter command row mode:

You can use the command line in a simpler way: when you log in from the installation folder, in the pop-up window with the ability to select a language, press Shift and F10 at the same time. If this method does not work, it will happen in many other ways as described.

Once it opens, enter sequentially (press Enter):

This entry will display a list of HDD partitions. You need to select a disk with Windows 10 installed and remember the partition letter. Moreover, it is not at all obligatory to use the letter C. The system section can be assigned values, for example, to the letter D, which we will use to enter offensive commands:

move d:\windows\system32\utilman.exe d:\windows\system32\utilman1.exe;
copy d:\windows\system32\cmd.exe d:\windows\system32\utilman.exe.

We remind you that instead of entering division marks at the end of the skin row, you need to press Enter. In this way, we simply copied the cmd.exe file from the system32 system directory and changed the name to utilman.exe.

Once you have entered the following commands, you will be notified of the successful movement and copying of files, then enter the wpeutil reboot line, after which the computer will reboot. Then you need to install Windows 10 in the same way, for which you remove the disk from the DVD drive or the flash drive from the USB connector.

After attraction:

At the customer authorization window, select the special icon. potentialities, roztashovanu right-handed unizu.
In the command line write:
- net user is a password, and as a name you need to enter a login to the cloud account in Windows 10, and as a password - a combination of characters that you will continue to use.
Press the Enter key.

If the name of the administrator consists of more than one word, enter it at the feet. If necessary, you can find it by entering the net users command - a list of system users will be displayed.

Open the disk to reset the password

You can later transfer the ability to reset the password from the cloud administrator account in Windows 10, although not locally, without forgetting it. Why is a special nose created - you can put a floppy disk on it:

Insert the accumulator at the drive;
Go to the cloud account component of the account, to do this, open “Start” and click on the account panel;
In the left column, go to the instructions to create a disk for resetting the administrator password;(5)
A special master will appear, by matching the indices of which you can create the tool you need.

It is important that the flash drive is not formatted during the process, and no information is deleted from it. A new file userkey.psw will simply be created, which, if necessary, can be transferred to disk or on any other device - it will work the same way.

It’s easy to accumulate 10 creations from Windows. For whom:

At the USB port or drive, a flash drive or drive is installed to reset the administrator password;
The form contains incorrect account details;
Below the form of the introduction and pobachite posilannya for sending off tributes.

A special add-on will appear, as a result of completing the checkboxes of any type of information, the information will again become available to you.

Addendum for updating your account record

For whom you can use the simple, cost-free program Online NT Password & Registry Editor. To accommodate this, you can use a primary flash drive, which can easily be used quickly if necessary. The ISO image can be burned to disk or files for transferring to USB can be downloaded at http://pogostick.net/~pnh/ntpasswd/bootdisk.html.

Go to new and sign in like this:

Microsoft account discount

The descriptions of the methods do not help, because to log into Windows 10, the account account of the account manager in Microsoft is required. However, it’s even easier to send your data. This can be done, for example, on another computer, laptop or phone with the Internet. If you can get out of the lock screen of your PC, you can also use it quickly. For whom:

Once you enter your mail, a sheet of instructions will be sent on it for sending exact data to Microsoft. A verification code will be sent to your phone, which you can also use to verify your account data with your Windows 10 administrator account.

recoverit.ru

How to reset password on Windows 10

Every person's skin would like to have to deal with this once in a lifetime, so that the password for a PC, laptop, OS or social media will be lost or forgotten. According to the statistics, the third password must be confirmed, and the 10th password cannot be confirmed for other reasons. In this article we will look at how to reset (remove) the password on Windows 10. All descriptions of the method do not depend on what account account you are using, which means it is our pleasure to do this for all users: and for those who are victorious about Microsoft's personal account, and those who have a local “look”. The process that is described is somewhat similar to password reset on older versions of Windows, however, it has some differences.

Increase your respect! First, you need to reset your password if your current password no longer works, we recommend that you once again carefully try entering the password with the Caps Lock button pressed and then pressed in the Russian and English versions. In such situations, you can simply help yourself.

Drop your Microsoft account for an additional online service. Login to Windows 10 without a password: 1 way

This method can be used if you need to give up your Microsoft cloud account if you are logged in on another device. Whatever device you use is connected to the Internet. This password relinquishment situation applies on the Microsoft website in accordance with company policy. You can create a new password at any time.

To delete your account record, go to the next page.
Then you need to click on one of the options, one of which is “I remember my password.”

After that, you need to enter your email address or phone number that you indicated at the time of registration. You will be asked to enter the captcha, and then follow the instructions to the site that will appear on the screen.

Increase your respect! Before you start deleting your account, please check to ensure you have access to the email address or phone number provided at the time of registration!

After all the procedures, connect to the Worldwide Network, go to the lock screen, and enter your new password, which you need to remember.

Changing the password through the cloud account of the computer administrator. Login to Windows 10 without password: 2nd method

In order to retrieve the Windows 10 password, you need to use one of these tools:

Live CD, which is designed to open the file system through a special disk of the operating system (does not require installation on a PC);
A disk or flash drive that is used for updating the OS or a disk with the Windows 10 operating system.

Let's take a look at the option where we have a fancy flash drive running Windows. When the screen appears asking you to select your settings, press and hold the keys for a few seconds: Shift and F10. This is how you launch the command line. Then enter the following commands sequentially:

After entering the skin command, you need to press “Enter”.

The window that appears will display all the hard disk partitions. It is necessary to remember the letter of the partition where Windows is installed (in most cases this is C, but never again!). After this, enter the command “Exit” and press the Enter key. In the application, the OS is installed on the C drive; this letter will appear in the subsequent description of the process.

Enter the following commands:

"move c:\windows\system32\utilman.exe c:\windows\system32\utilman2.exe"
"copy c:\windows\system32\cmd.exe c:\windows\system32\utilman.exe"
And then we write the wpeutil reboot command (restart the PC). Re-engagement can be eliminated in any other way. After restarting your PC, you must restart the installed OS.

Important! If instead of installing the installation disk, you are using any other method, you are responsible for using other methods to copy the file "cmd.exe" into the "system32" folder, saving it under the name "utilman.exe".

After activating the system, the authorization start screen appears, and at the bottom right hand side you need to click “Special Features”. A command row window will open in which you need to enter the command:

"net user Administrator /active:yes"

Increase your respect! The word "Administrator" in the OS under other languages may be different. For example, for the English version you need to enter the word “Administrator”.

After exiting the command and restarting the PC (if necessary), a menu for selecting cloud records appears. Here you need to select a cloud account under the administrator's name and log out to the new one without entering a password.

Make sure that the first entry to the cloud record can be significantly higher than the initial one.

Setting a new password for the account on your PC

After completing the login, right-click on the “Start” menu and go to “Using a computer.” On the monitor, open the “Local Accounts” section and select the “Costs” folder. Here you need to right-click on the name of the bear to reset the password and click on “set password”.

Then show up, because we are sorry in advance, because it is necessary to read it carefully. Click “Continue” as soon as possible.

Now you can set a new password for the selected “option”. You will need to repeat the password two times and press “Ok”.

You can change (change) your Windows 10 password in the manner described above, just by accessing local cloud accounts. If you have a Microsoft cloud account, you must reset your password through the company's website, as described in the first method on the article page. Another method also allows you to create a new cloud account for a new account manager who has become an administrator for this PC.

In the other way, it is necessary to remember that for a stable system it is better to turn everything back, the remains of what happened before the password reset procedure. To do this, you need to open the administrator account in the additional command row:

"net user Administrator /active:no"

You also need to delete the “utilman.exe” folder in “System 32”, which we previously renamed. In this way, you can restore access to Windows and improve the functionality of your PC.

pc4me.ru

How to reset Windows 10 password Computer for dummies

Security Turbo forces users of personal computers to protect cloud records with a password. You may want a laptop that is lost without visibility in a public place, you want cloud recording with broad administrator rights, password theft from children, or minor computer problems. A work computer often also has a password, and there is no need to explain why. Of course, even if the information is very important, the password may be forgotten. Especially if you want your partner to renew your relationship regularly, it will be difficult to recognize a good association. It may be that you changed your password last night, but you no longer remember the lie. Most often, this happens, even if the password has been set for a long time, your fingers will enter automatically, and the new power may be forgotten. Otherwise, forgetting your password will prevent you from logging into the system. This article will help you reset your password, since you don’t have a flash drive to reset your password. Otherwise, simply insert the USB flash drive and click “Reset password” under the input field, then continue with the instructions.

To restore your respect, if you had given up your password, there would have been quite a few valuable treasures, and the password would have been lost. If you throw off the password, koristuvach, for example, lose access to encrypted files. If your PC needs to go beyond the boundaries of a simple home hack, read on the Internet about all the password hacks that can get you locked up.

Gain access to the system

Windows 10 has two types of cloud records: Microsoft cloud record and local record. The process of upgrading to the first is simple, so let’s talk about something else for now. The local account password can be reset in a number of ways. They are worried about victorious software and complexity. Our instructions tell you about the simplest method, and the process of deleting the account consists of two stages: denying access to the system and automatically resetting the password of a specific customer. Now we know a way to get into the system, although you may have administrative rights. Once you have revoked administrator access, go to another part of the article.

Password reset

The procedure is trivial when it comes to accessing the system. Follow these lines:

Reset your account password to Microsoft

If you have a Microsoft cloud account and your computer is connected to the Internet, the password can be reset from another device or from a smartphone. To do this, go to https://account.live.com/resetpassword.aspx and follow the instructions.

dontfear.ru

Forgotten password in Windows 10

In this short excursion, I will try to show how you can reset (remove) your password in Windows 10 using an additional special program.

It’s very common for active business owners to experience “memory lapses”:), which can result from the fact that having come up with a clever password (for example, to log in to your Windows operating system), they forget it within an hour!

Having spent almost an hour testing the currently popular programs for retrieving a password for logging into Windows 10, I settled on one utility, because others, after installation, turned out to be unnecessary due to the greed of their creators - programs Istiv.

Call the Trial version for an hour or for a number of starts, but those foreign programs that I know through search immediately after installation require payment!

I will list these programs:

Windows Password Key Standard;

iSunshare Windows Password Genius Advanced;

Windows Password Recovery Tool Standard.

1) And so, as I already thought, only one program turned out to be useful - Lazesoft - Recover My Password, you can download it here;

2) After you have downloaded it, install it on a third-party computer, select Burn Cd / Usb Disk in the menu;

3) Select the option DO NOT Specify Windows version of target computer;

4) I burned the disc and then selected option F:[Otiarc DWD…];

5) Press on Start, check for a number of hvilins;

6) We insert this disk into the computer where you need to reset the password, re-enable it, when you start Bios, press the F12 button;

7) In the menu, you need to select your CD-ROM from the list of devices and press Enter;

8) The program will be downloaded from the disk again and you will go to the menu, select - Lazesoft Live CD [EMS Enabled];

9) Select from the menu - Password Recovery;

10) Press the Next button;

11) For the person who is spilling the message, press Yes;

13) From this menu, select the name of the account manager for whom you want to remove the password for logging into Windows 10 and click on the Next button;

Press OK;

15) І finally embossed on the Reboot button;

The system will automatically re-enable itself and if you have completed everything correctly as described above, the password for logging into Windows 10 will be successfully removed and you can safely log into the operating system!

wisekaa.org

How to update your Windows 10 password on your computer or laptop

Losing your Windows 10 account account password can be a serious problem. As a result, access to the data of a particular computer is completely lost. Hello, as you know the password of the cloud administrator account, with which you can use passwords for users of a specific computer. Either way, it turns out to be forgotten or ruined.

Sometimes it is necessary to permanently deny access to the computer a password you do not know. The information you need is right at your fingertips, but you have no ability to access it quickly. How can I improve access to my computer and files or documents?

What's wrong if you forgot your Windows 10 password?

Step 1: Renew data from the computer whose password has been lost

If, as a result of losing your Windows 10 cloud account password, access to your data has been lost, one of the effective ways to update it will be using Hetman Partition Recovery programs.

For whom:

Download the program, install and run it from another cloud account on your computer. Become familiar with the capabilities of the program and step-by-step instructions.
For promotions, the customer will be promptly informed by the Mayor for updating the files. By clicking the “Next” button, the program prompts you to select the disk where you want to update the files.
Then click on the files on the disk where necessary and select the type of analysis. Select “Final analysis” and check for the disk scanning process to complete.
Once the scanning process is complete, you will be given files to update. See the requirements and click the “Update” button.
Select one of the preferred methods for saving files. Do not save files to a disk from which the files have been deleted; they may be overwritten.

Step 2: Update the password of the created account to the Windows 10 Administrator account

Are you wondering how to update the password for your Windows 10 Administrator cloud account? Vikonite like this:

Lesson 3: Programs for updating passwords for cloud accounts in Windows 10

You can update passwords for Windows 10 account accounts using additional special programs for resetting or updating passwords. Such programs are especially relevant when you lose the password for an Administrator account (password fragments of other account accounts can be reset for another account account).

For whom:

Please install the program to reset or update your account passwords.
With the help of such programs, create a valuable CD, DVD or USB storage device (as needed).
Re-enable your computer and re-install your vanished wear.
Skip or update the passwords for the required account.

Lesson 4: Renew forgotten password for help Windows 10

The first time you print out the updated password for your account account, turn the prompt to the password that appears on the private screen next to the password entry field.

If the hint did not help you guess the password:

Croc 5: A valuable disk or flash drive for updating your Windows 10 password

You can create a backup disk for updating your password yourself or quickly use a prepared option (which you can add or download).

Renew password using LiveCD

The cloud account password can be updated by starting the computer using an additional LiveCD - an alternative portable version of the operating system. This method is relevant because you cannot connect a computer or connect a hard drive to another system.

For whom:

Vikorist the installation disk image

If, for whatever reason, you did not create a system update disk, and Windows has run out of time, you can renew it using an additional image of the operating system update disk.

This image can be created immediately after installing the OS, software, or anything else.

You can download a cost-free utility from Microsoft and create an image. For whom do you follow this:

Note. Do not run the system update disc from Windows. To correctly install it in the BIOS, install the first device in the system image and restart the computer.

Important: It is necessary to create the image only on a working system that is not infected with viruses and does not contain any damage. After updating, you take an exact copy of the system at the time of creation.

Lesson 6: Renew access to your Microsoft cloud account

In other versions of Windows, the cloud record is used for integration with the Microsoft cloud. To use any of the functions of the Windows cloud storage, the robot with the operating system must have access to it.

If you need to update access to your Microsoft cloud account:

Croc 7: Install a clean installation of Windows

If any of these methods do not lead to the desired result, reinstall Windows.

In order to create a clean installation of Windows, you need to create an installation disk or another drive from which you plan to install the operating system.

Import the computer from the installation disk. For whom you may need to change the order in which the BIOS is installed (or UEFI for more modern computers).

In the installer menu, select the drive on which you want to install Windows. Why do you need to format it? If you are not limited by the size or size of local disks, they can be removed and rearranged again.

Please note that formatting, deleting or repartitioning disks deletes all files from the hard disk.

After inserting a disk for installing Windows, the process of copying system files and installing the operating system will begin. At the time of installation, you do not need any additional actions. To complete the installation, the computer screen will be turned off for an hour at a time, and the computer will automatically restart to complete all installation steps.

Regardless of the Windows version, at one stage you may need to select or enter basic personalization settings, the computer's operating mode at a time, as well as cloud recording settings or create a new one.

Once you have installed your desktop, the clean installation of Windows can be completed.

Note. First, start with a clean installation of Windows, then check the availability of drivers before installing devices and saving your files. Be sure to save the drivers on your computer and create a backup copy for important data.

Has your password been updated? Deprive your voices and place your questions in the comments.

HetmanRecovery.com

Nowadays, there are practically no fundamental measures to protect against malicious computer devices and to deny access to personal confidential information of the client.

Setting an administrator password is also not such a safe way to protect your computer, as there are at least a few ways to hack it and get around it.

Changing the Administrator password and logging into the system under your account account is easy and effortless

About what methods this article has.

Porada 1. Removing the password for the additional “Command Interpreter” in Windows

For which the following actions are consistently taken into account:

press “Start” and select “All programs”;
in the tabs that have opened, click on “Standard” and literally in the first rows of the list, click on the “Viconati” option;
in the “Viconati” command line, enter “cmd” and “Ok”;
The command line "Viconati" is written "cmd"
A command interpreter window opens in front of us, in which we write the command “control userpasswords2”, then click “Enter;
In the Command Interpreter window, enter the command “control userpasswords2” and click “Ok”
“Account records of business owners” appear on the screen – the required account record is visible in the field “Cost workers”;
In the field "Koristuvach" we see the cloud record we need
We remove the error from the option “Enter your username and password”, then “Set” and “Ok”;
We understand the ensign “Please enter your personal name and password”
at the “Automatic login to the system” window, enter and confirm the password or leave the data fields blank, stamp “Ok”, press “Ok”;
In the “Automatic login” window, enter a password or leave the field blank.
We close the command row window and re-lock our computer.

Porada 2. Removing the password for the cloud account Administrator in Safe Mode

To successfully transfer the created account to the “Administrator” account, proceed step by step with the instructions below.

Lesson 1. Restart the computer and press F8 at the time of renewal.

Lesson 2. The menu prompts us to select one of the additional options for installing the Windows operating system - select “Safe Mode”.

Lesson 3. Next, log in to the system using the newly created Administrator account, for which you will have to assign a daily password. For this purpose, enter “Administrator” or the Russian word in the login field. The password field is cleared, and “Enter” is simply pressed.

In Safe Mode, you select not to steal the password for the Administrator account account.

Step 4. If you have already confirmed that Windows is in Safe Mode, you will be prompted with a “Yes” confirmation.

Press "So" to continue working in Safe mode

Step 5. We start the robot in safety mode - as soon as the work table is ready, we press the following sequence of options:

Start -> Control Panel -> Account records of personal accounts

In Safe mode, select “Cloud records of account owners”

Lesson 6. Move the cursor over the name of the account manager, the password you need to enter and discard, and emboss the cloud account icon.

Step 7. From the menu that appears, select the “Change password” item, enter a new password and confirm it. If we simply give up the password, then this field will be left empty.

From the left menu, select the “Change password” option, then enter a new password and then confirm it

Croc 8. Press the “Change password” button.

Lesson 9. First close the “Accounts of Accounts” window, then close the “Control Panel” window.

Krok 10. Restoring the computer.

Porada 3. How to reset the password for the created account of the Administrator

This will be a blessing to those who, having faced the problem, have recovered the cloud record of password theft, which we, of course, happily forgot. Well, it’s easy with the following brief instructions:

We will need a CD (or flash drive) with a set of recovery programs to update Windows, which we insert into the drive, after which we restart our computer.
To update the system, a disk-reanimator is ideal
When you start the computer, enter the BIOS by pressing the “Dilete” key.
The BIOS can change the installation priority, which means that the computer requires a CD-ROM. Next, we place our backup disk with the operating system in the drive and restart the PC.
After downloading the computer from the CD-ROM, the recovery disk menu appears on the screen, in which we select the edited copy of Windows and go to “System Update”.
For an edited copy of Windows, select “System Update”
Next, in the dialogue settings of this window, we click on “Command Row”.
In the command field that opens, enter “regedit” and confirm the command with the Enter key.
The HKEY_LOCAL_MACHINE section is known and visible, and the menu is selected File, and then Load hive.
We need to open the SAM file, then select the section HKEY_LOCAL_MACHINE\im_hash\SAM\Domains\Account\Users\000001F4, then double-click on the F key and go to the first value in the row 038 - to the number 1 1, as shown in the photo.
Select HKEY_LOCAL_MACHINE.. and then click on the F key
This number is replaced by the number 10, in which case, out of great caution, it is necessary to change only this number, other values are strictly protected.
This number “11” is replaced by the number “10”
In the same section HKEY_LOCAL_MACHINE\im'ya_kushka\SAM\Domains\Account\Users\000001F4, select the File menu, then Load hive and select “So” - confirming the vivantage of the hive.
Select the menu File - Load hive and confirm your choice
Now we close the registry editor, as well as the entire installation process, remove the disk and restart the computer.

Windows 8 Administrator password can be hacked

For Windows 8 there is a simple way to reset the Administrator password. All you need to do this is to follow the steps below:

Procedure 1. Go to the “System Update” section, and then the “Diagnostics” console, where we select the “Additional Parameters” section.

Copy the file “sethc.exe” to save your money

Krok 3. Now we write in front of the command line:

copy c:\windows\System32\cmd.exe c:\windows\System32\sethc.exe, so instead of "sethc.exe" enter "cmd.exe".

Replace the file "sethc.exe" with "cmd.exe"

Step 4. Exit from the command console using the additional exit command.

Lesson 5. We are re-defining our computer and changing the basic parameters.

Lesson 6. Press the Shift key five times to launch the command line.

Lesson 7. Enter “lusrmgr.msc” into the command console and the administrator’s name.

Enter "lusrmgr.msc" into the command console and also the administrator's name

Note: when the account is enabled, it can be activated using the additional command “net user “Admin_name” /active:yes”

Lesson 8. Set a new password - type the command “net user “Admin name” password”.

Please note that this method is also suitable for earlier versions of operating systems.

Using these simple methods, you can reset the administrator password on your computer and laptop in operating systems Windows 7, 8 and 10.

Korisne video on the topic

The video below will demonstrate exactly how you can reset the Administrator password.

Reset the Administrator password in Windows 7 using another small program

How to reset your password when logging in to Windows 8

Resetting the Administrator password for Windows 10

I'm flying.

And there is a hole in the old...

Many people like to protect their computers with passwords (there is nothing valuable on them). There are different situations when the password is simply forgotten (and there is a hint that Windows always recommends changing it; it does not help to guess). In such situations, some users install Windows (those who do the same) and continue, while others ask for help from the former.

In this article, I want to show you a simple and (very) quick way to reset the administrator password in Windows 10. No special skills for working on a PC, such as complex programs or anything else, are not required!

The method is relevant for Windows 7, 8, 10.

What is needed for a cob of skidding?

There is only one option - the installation flash drive (or disk) from which your Windows OS was installed. If there is no such thing, you need to write it down (for example, on another computer, or a friend’s computer, etc.).

Important moment! If your OS is Windows 10, then you need a fancy flash drive with Windows 10!

In order not to write here a voluminous book about the creation of the most popular noses, I will post the message on my front page, where the most popular options will be considered. If you don’t have such an installed flash drive (disk), I recommend getting one, as you will need it from time to time (and not least for resetting your password!).

Creating a fancy flash drive with Windows 10

How to create a flash drive with Windows 7, 8 -

Recording a vandalized disc -

Z kid administrator password for Windows 10 (one by one)

1) Take advantage of the installation flash drive (disk)

To do this, you may need to go into the BIOS and set up the settings. There is nothing complicated in this, as a rule, it is only necessary to indicate which disk to create the attraction from (example in Fig. 1).

I’ll put a note on my statistics, as if someone has lost their folding shoes.

Setting up the BIOS for downloading a flash drive:

2) The system update section is open

If you completed everything correctly in the first step, the Windows installation window may appear. There is no need to install anything - the instructions are there. System upgrade“, which I need to cross.

4) Additional parameters

Then open the section with additional parameters.

Small 4. Additional parameters

5) Team row

After this, we launch the command line.

6) Copy to CMD file

The essence of what you need to do now: copy the CMD (command row) file instead of the file that represents the stuck keys ( The function of sticky keys on the keyboard is short-circuit for those people who, for whatever reason, cannot press a number of buttons at once. To open them, you need to press the Shift key 5 times. Many koristuvachs 99.9% - this function is not required).

To get started, it is enough to enter just one command (div. Fig. 7): copy D:\Windows\system32\cmd.exe D:\Windows\system32\sethc.exe /Y

Note: The drive letter “D” will be relevant if you have Windows installed on drive “C” (then the most advanced installation is available). If everything went as required, you will receive a notification that “Copied files: 1.”

Small 7. Copy to CMD file to replace sticky keys.

After this, you need to restart your computer (installation of the flash drive is no longer necessary, you just need to remove it from the USB port).

7) Creation of another administrator

The easiest way to reset your password is to create another administrator, then log in under him in Windows - and you can do everything you want.

After re-activating your PC, Windows will ask you for a password again, and that's it. press the Shift key 5-6 times- may appear in the window with the team in a row (since everything was done correctly before).

Then enter the command to create the koristuvach: net user admin2 /add (De admin2 - the name of the cloud account, maybe whatever it is).

Note: after the skin command, the command to successfully conquer may appear. After entering these 2 commands, you will need to restart your computer.

Small 7. Creation of another koristuvach (administrator)

After restarting your computer - in the bottom left corner (for Windows 10), you will get a new created account, you need to log in under it!

Vlasna, on whose entry to Windows, in which case the password was lost - completed successfully! Having lost the remaining touch, about this below.

How to remove the password from the old account administrator account

Easy to finish! The kidney needs to be opened windows keruvannya panel, then go to “ Administration" (to complete the message, click on the other icons in the menu panel, div. small 9) and open the section "

I guess that not everyone can use this method (and all programs for automatic downloading. I learned about one of them in this article:). If you want this method to be very simple, universal and reliable, which does not require a lot of skills, you only need to enter 3 commands.

That's it for now, good luck 🙂