One of the most popular services on the Internet, especially without drones, is about choosing and changing the Wi-Fi channel. These actions can be done by looking at the settings of your router. It is not at all surprising that such a problem occurs even more often.
The reason for this is the absence of interruptions in the Internet through problems with the channel. The things that most people complain about most often are: low data transmission speeds, the Internet is interrupted for long periods of time (there is no access), and the connection via Wi-Fi is interrupted for a long time. All these problems have one reason - the popularity of your channel.
As another negative legacy of increased obsession, we can name this problem: your computer stops downloading the Wi-Fi network itself while others are downloading.
About how to find another channel, make the transition from one to a new one, how to do everything, we learned from the statistics. We will take a look at the solutions based on the parameters of the most popular router models. Among them you can connect with Tp-Link, Asus, D-Link, Zyxel, as well as Tenda
Visibility of the Wi-Fi channel. The need to change it.
Let's start with the most basic ones. There are not a lot of theories about drone-free connection channels. At this time, most routers are tuned to the frequency 2.4 GHz. This display is also considered standard. The numbers are larger - for example, 5 GHz Although the stench is noticeable in recently released models, there are still fewer of them.
The 2.4 GHz frequency transmits the vicinity of the available range of channels: from the first to the thirteenth. It is not difficult to figure out whether any Wi-Fi router operates on one of the thirteen channels. There are such countries as Russia and Ukraine. In America, it’s different: you can only use it for 11 channels. Take this feature into account because, as a popular American device, you can easily find that you can’t get Wi-Fi on the 12th or 13th channels.
Problems with channel remapping occur when multiple connections are connected. How does it work?
- You install, for example, the 5th channel.
- Susid instructs you to make a choice on the 5th channel.
- In this manner, Channel 5 has already been affected for a long time. And you can see if there are so many of them.
- There is interest in the channel.
This problem occurs even more often in apartment buildings, and even less so in private ones, because the distance to the neighbors is great.
The basic parameters are as follows: when the router is turned on, any channel is automatically selected (the one with the least interest). When you turn off and turn on the router again, a different channel is selected.
Of course, you can set this setting - when the router is turned on, it will connect to the same channel, for example, to another. This will happen in the future. At any time, this channel may become subject to interference, and you will be faced with the same problems that we reported on the beginning of the article. This is the advantage of automatic channel selection. You can re-activate the device in the future, and you will find another, better option.
The real thing is that there are special programs that can be installed, which channels are occupied, and which are free. There is more information about them.
Still, the easiest and most accessible way to deal with problems with a droneless connection is this. If you can’t solve problems after the first time, try it again. You can also experiment with the adjustments:
— if you have chosen to install a static, or stationary, channel, switch to automatic selection;
- Well, anyway, the router automatically selects the channel, set it to a specific number - try 1.6 and 11 right away.
Such manipulations help to resolve any problems.
If the tests appear nearby, you can go to special programs. The stinks are called inSSIDer,WiFiInfoView. Our assistants will provide you with information about the available channels that you can connect to.
Interruptions with the Internet are always associated with the importance of one channel or another. Sometimes there are problems with the living system, malfunctions that resemble other gadgets, and breakdowns of other parts.
How to use special programs?
If your device (be it a laptop, smartphone or something else) shows that the adjacent radius has a lot of different connections, use special programs that will show you that there is a valid channel.
The most popular program of this category is rightfully respected inSSIDer. Its main advantage is free access, making it absolutely cost-free. The Russian menu is not translated, the English one will be difficult to navigate.
A good alternative is the WiFiInfoView program (raju vikoristuvati її).
Search the channel using the inSSIDer program
The algorithm of actions within the framework of this program will be as follows:
- For the cob it is necessary to attract. Home version 3.0.3.53 (infectious) for Windows 7 Windows 8 and Windows 10.
- Next is the installation. Run the installer, download the recommendations contained in the instructions.
- You launch it by clicking on the appropriate shortcut (the shortcut will be on your desktop).
- The program can be easily installed not only on a computer, but also on a phone (based on Android/iOS).
- Turn down Wi-Fi.
- After launching the program, go to the tab NETWORKS. You will see a list of available Wi-Fi networks that are nearby, including yours. You can find out about the connections until the rest of the time due to the presence of the star.
- We pay attention to the Channel, and to those that are displayed under this tab (information about occupied channels).
- Robomo choose for the sake of this or that.
A small recommendation: if you analyze your channels, pay attention to ones like 1, 6, 11. If other channels have not selected them, then try setting up the router on them yourself right now. This is due to the fact that there are three channels don't fumble at all, which cannot be said about others, for example, about 10 . If the line is adjusted to the next one, then go 2 to 2 p.s., then channels 8 to 10. For example: 8,9,10,11,12.
Vibir channel for additional programs WiFiInfoView
This program is even easier for the mastered one, but it is still advanced. It won't be possible to install it. So, you will see less information, but it will be enough.
- Vidkrittya the desired file. Launch WifiInfoView.exe.
- Stovpets Channel Provide information about which channel is being vikorized by the network.
- We analyze our activities, and carefully choose the best one. The number can be set in the settings of your router. We'll tell you how to earn it.
Changing the channel on the Tp-Link router
Finally, if your router is a Tp-Link brand, follow the instructions below to change the channel:
- We can establish connections to the router (drote-free or drone-free – it doesn’t matter);
- In the browser row, enter the address of your router's control panel. 192.168.1.1 , 192.168.0.1, other types of IP addresses or hostname . If you can’t find out your address or are having problems logging in, read it.
- You will finally be able to enter the data. Standard values – tse admin, admin. In your case, the stench may be different - you changed them by rapt.
The further route is like this: Wireless — Wireless Settings(Dartless mode - Dartless mode settings) - Channel(Channel) — Vibir channel.
Before doing this, check that the region assigned is correct. Why marvel at the tab? region- Vaughn is known right there.
Changes are saved when pressed Save. Next, restart your router and check how well the Internet works. A little more information about passwords to Wi-Fi and login to the system can be found in the status: ““.
D-Link: channel parameters can be changed
For routers of this brand, the algorithm will be basically similar: Connection before limit - login before setup - enter address 192.168.0.1 ta danih ( adminі admin). Are the folding parts disappearing? Vikorist Qiu.
D-Link is a wonderful help in settings. You can check at once which channel is being watched and the popularity scale of other numbers. The initial diagram allows you to make the correct choice. You may not need to install any special programs that we talked about earlier.
What about Asus?
Working with Asus routers does not differ in any way from the options discussed above. Wi-Fi connection is also carried out, we are included in the setup (addresses are the same 192.168.1.1 , and name, and password – admin, admin). More detailed information can be found if you open it.
Tab Bezdrotov's measure, insert the channel number, Zastosuvati- Ready. The router will be re-enabled automatically.
What are the steps for the Zyxel Keenetic router?
We install Internet connection. We open the page to tune in, which is located behind the standard address 192.168.1.1 . Enter the necessary data. The standard password here is not admin, but 1234.
In the settings window, go to the tab under the name Merezha Wi-Fi We edit the region (if necessary), and then install the required channel. To adjust these parameters, you need to press Set.
We can install a specific channel on Tenda routers
In order to use the site to tune in, you need to enter the address 192.168.0.1 . Standard fields – login and password – will be as follows: login – admin, password – empty middle. Go to the tab Wireless settings. In the Channel row, select a number. Zrobimo saving of change - Ok.
Visnovki
If your situation has not changed at all after all the methods that were stated in this article, you are left with one decision - buy a stronger router, the same one we talked about initially - with a frequency of 5 GHz. In practice, there were such outbursts, and everyday manipulations to change channels did not help solve the problem with interruptions.
Also remember that some problems may be of a technical nature - any element in the router may break. Every day, as long as you change the settings, they won’t be brown.
The article turned out to be very informative and useful for all journalists around the world. We have tried to develop the easiest and most accessible ways to alleviate the most common problems with the Internet and wireless connections to Wi-Fi.
How to change the Wi-Fi channel on a router, drone-free access point or modem. Pokrokov's instructions with pictures about changing the dartless channel on various measuring devices. Also about those who need to change the Wi-Fi channel and understand why they need to change it later.
Is it time to change the Wi-Fi channel?
In rich apartment buildings and offices there is an even greater stock of wireless devices: routers, modems, repeaters. If there are a number of devices nearby that share the same channel, you may experience problems with Wi-Fi: low data transmission speed, the Internet disappears, you cannot connect to the Wi-Fi connection on your smartphone, tablet or laptop. And here it’s better to choose a different - stronger channel.
How do you know if you need to change the Wi-Fi channel?
How to change the Wi-Fi channel on a TP-Link router
Open the section Wireless.
Select a friend Wireless Settings.
In the field Channel install the wrong channel.
Save settings using the button Save:
Changing the wifi channel on the D-Link router
Open the section Installed.
Select settings Installation of a dartless fence.
Press button Adjusting the dartless connection manually:
Receive ensign Turn down Auto-Select channel.
Enter the number in the field Bezdrotovy channel.
Changing the drone-free channel on an ASUS router
Select section Bezdrotov's measure.
At the tuned Channel Select your luggage number.
Press Zastosuvati:
How to change the frequency of communication in your ZyXEL device
- Light up section Network.
- Open the door Wireless LAN.
- Receive ensign Auto Channel Selection.
- In the field Channel Selection Select frequency.
- Press Apply, so that the adjustments gain decency:
Please be aware that it will not be long before problems with wifi arise through crossings of the borders. If you have tried all the frequencies and nothing has helped you solve the problem, try:
- restart the router,
- Vikonati skipdannya configuring the router,
- move the router to a different location,
- change the encryption type.
Let's figure out what kind of channel the router has, is it needed and should it be changed? Channel is a “subfrequency” of the main frequency of 2.4 GHz, which is what routers operate on. The 2.4 GHz frequency is divided into 11-14 channels at the edge. You can set up a channel in your router settings depending on your Wi-Fi connection. Routers sold in France have 13 channels. Well, for example, US stations have 11 channels.
Is it possible to change the channel on a Wi-Fi router?
If there are 2 routers, the signal of which flows and flows on the same channel, then in the drone-free Wi-Fi system, there may be a variety of problems, disconnection with the router, low Internet speed and a lot of high-speed internet. problems that are important to diagnose.
There are situations when the Internet works on the device only if you are near the router, between the rooms. If you go further, the connection is saved and does not work on the Internet. It is possible that in the already placed layers, there are simply no free channels. And one of the wifi droneless networks operates at the same frequency as your router. Low fluidity and unstable connections result.
On routers, the channel selection is set to the Auto position. Tobto. The router will independently occupy the free channel and use it. On your router channel, you can run tasks at random, for example, on popular D-Link routers, channel 7 is installed. Therefore, if you have a Dlink, you can work on a similar channel in order to save money getting ready after cleaning.
What channel should I install on the router?
If you don’t have a lot of Wi-Fi connections nearby, you don’t have to worry about changing the channel and install whatever you want.
Otherwise, if you have a large network nearby and all 13 channels are full, then you can set up automatic search and select the appropriate channel.
Changing the channel on the router
Why and when is it necessary to change the channel for a drone-free Wi-Fi network, we’ve figured it out, let’s see how to get it?
Setting up the channel on TP-Link routers
Log in to the administrative control panel of the router. Addresses are 192.168.0.1 or 192.168.1.1. Login and password, for registration, admin and admin to enter the setup can be found at the bottom of the router, it is stuck on the same day.
Go to the Wireless tab. And in the Channel item, you can set the required values.
To save settings, click the “Save” button and restart the router. You can use the additional control panel through the item System Tools - Reboot, the “Reboot” button.
Setting up the channel on D-Link routers
In the router panel, open the Setup – Wireless Setup menu. If you want the router to select the appropriate channel, you need to set the check box opposite the Enable Auto Channel Selection item. To select a particular channel, you need to check the box next to this item and enter the required channel number next to Wireless Channel.
Save your settings by clicking the “Save Settings” button.
If you need to change the channel on another router, then use approximately the same algorithm.
A lot of people who use the home drone-free Internet were thinking about how to choose the optimal Wi-Fi channel that would guarantee the best possible signal. It is also possible to signal the speed of browsing websites or other files.
Most modern routers are programmed to automatically detect and connect to the connection channel, but sometimes users have to do it manually. However, for the implementation of such training, people often lack technical skills and knowledge. So, to fully understand the problem of choosing a Wi-Fi channel on a router, let’s get into the theory.
It is important that modern Wi-Fi routers operate at frequencies from 2.401 to 2.483 GHz. Different frequencies form special channels. For the Russian Federation їх 13. At the same time, please be careful not to be embarrassed when setting up the router, as long as the user is asked to select the mode of operation of the router. If you choose the wrong region, for example, a region that has more than 11 channels, then it is likely that the router, when installing numbers of a higher value, simply does not add access points. There is no need to manually set the required number for the channel, other than the available range (1-11). It is important to make sure that you select the right choice for your choice, and there is no need to neglect any additional manual adjustments.
The newest router models can support the 5 GHz frequency. However, most buyers use cheap models that, as stated above, operate at frequencies of 2.4 GHz. Such routers operate on one (or a pair) of channels, and to find out about the channels that the current routers use, you can use a special program. For example, inSSIDer is one of the most popular and least expensive programs for manipulating Wi-Fi. The program must be downloaded to your computer (or another device that is being tested), installed, opened, and you can immediately view the available data about the access points operating nearby (routers and routers). Axis screenshot of the working program inSSIDer:
It is necessary to marvel at the Channel graph. And below you can look at the graph of the vikoristan channel, which shows which channel has the least amount of attention. The graph shows that the least popular channels are 8 to 13.
On the right of our graph there is a field for displaying the signal of routers at 5 GHz, but it is empty, since this diagnostic is only available in the paid version of the program, which is being tested. This program is relevant for computers, tablets and laptops. To set up Wi-Fi on a phone, for example, on Android, you need to use special programs.
What is the operating mode of all routers? Routers most often have automatic settings for channel selection. In most minds, the performance of a router is entirely pleasant. However, there is a situation where you need to change the channel manually and enter the necessary data.
This is what setting up a router (automatic) from TP-Link looks like:
For the row you see, you can change the automatic mode to manual. To do this, just change the values in the Channel section.
Such a choice of channel is necessary if there are a wide range of access points in the booth and there are very close to one.
- Wi-Fi speed is dropping dramatically;
- communications between the device and the access point are interrupted;
- The signal becomes weaker, and unless you connect to the router's power supply, it won't work.
If more problems arise, then, in a sing-song manner, adjust the manual selection of channels. This way you can find the right channel and configure the router.
It is also necessary to remember that problems with dartless lines arise for a variety of reasons. It’s important to set up your router first:
- restart the router;
- I will completely discard the adjustments;
- change router setup;
- change encryption type.
Select a free drone-free channel on your router
Regardless of the router, the algorithm for setting up the necessary and valid channels on the router is the same for everyone. It took a little while to adjust the vibration channel. Why do you need to know:
- Router IP addresses;
- password for the web interface.
You will find this data either in the instructions for the router or on the label/box of the router. You can find instructions on how to set up your router on our website. Now let's look at choosing a drone-free channel from different routers.
D-Link
Let's look at changing the frequency of the wifi channel using the DIR-300 NRU. go to the settings of the D-Link router.
1. Enter the SETUP section.
2. Select the section that is left-handed – Wireless Setup.
3. Press the Manual Wireless Connection Setup button to help change the Wi-Fi setup method.
4. In the Wireless Network Settings section, you will find the Wireless Channel text and then select the bandwidth of the required channel.
5. To save changes to settings, click Save Settings.
6. Check the number of lines, turn on the device from the network and reconnect to Wi-Fi.
TP-Link
Let's look at changing the frequency of the wifi channel using the TL-WR941N. The first thing you need to do is go to the settings of your TP-Link router.
1. Go to the Wireless section. The Wireless Settings section will automatically open. Let's get to this point.
2. Select the Channel item and select the number of the channel we need.
3. To save changes in settings, press Save. Only after this change will there be orderliness.
4. Connect to the network, and after a couple of steps, connect to Wi-Fi again.
Asus
The first thing you need to do is go to the settings of the ASUS router.
1. We go to the section “Bezrotova Merezha”. The open interface displays a number of tabs, which we click on “Zagalni”
2. In the open account, look for the “Channel” item and click on your settings.
3. Use the list to find the number of the optimal Wi-Fi channel.
4. Press the Lock button to save the setup of the router.
5. Turn on Wi-Fi, check it out, and reconnect until the end.
ZyXEL
The first thing you need to do is go to the settings of the ZyXEL router.
1. Tap the droneless communication indicator icon at the bottom of the screen. In the open interface, a Wi-Fi connection window will open, select the “Access Point” section.
2. In the deposit that has appeared, we find the “Channel” sub-item, press on the new one.
3. A list will appear. We know the number of the required Wi-Fi channel.
4. Press the Freeze button to permanently change the router settings.
5. We enable wireless connections, check the number of devices, and can connect to Wi-Fi.
Or another firmware version:
Netgear
1. Embossed in the box under the Network section.
2. In the open tab, look for the Wireless LAN item and click on your settings.
3. The first General tab has the Channel Selection field. Please select the Auto Channel Selection item. We take away the ensign badge from him.
3. In the Channel Selection list that appears, you will find the necessary frequency for correct operation.
4. Press the Apply button to change the settings of the router.
5. The droneless connection is interrupted, after about an hour we connect to Wi-Fi again.
Also, to select a Wi-Fi channel on your router you need:
- learn the theory and methods of router operation;
- read the instructions for the selected router;
- realize the need to change the channel;
- Depending on the router model, change the router channel setup mode (basically there is one setup algorithm).
Selecting the correct Wi-Fi channel optimizes the work, improves bandwidth and continues to operate the router.
Did you know Drukar's mercy? See text and press Ctrl+Enter
Vitannya! Quite often, if I recommend in various comments to articles how to configure routers on your site, I need to describe how to perform a simple procedure, for example, change the channel on the router. Already a number of times it’s worthwhile to work with the comments. And having decided to bring such a small joy to this article, I may still need it, but I only sent this message to the present and not immediately described. I'm so lazy :).
Let's figure out what this is all about right now "channel" have configured the router, what should you do and change it.
How can I explain what is clear and true:). Channel, which is the “subfrequency” of the main frequency 2.4 GHz How do Wi-Fi routers work? (not all and not least routers). This frequency of 2.4 GHz is divided into 11-14 channels The channel is the same way from your router to your computer.
In the settings of the router, you can set the channel on which your Wi-Fi connection will be carried out. Routers that are on sale in Europe have 13 channels. For example, US devices have 11 channels. What is this channel, I'm sure we're confused.
Is it possible to change the channel on a Wi-Fi router?
Everything is very simple. If, for example, there are two routers, the signal of which flows and flows on the same channel, then in the work of these routers, or more precisely in the work of drone-free Wi-Fi, different errors can occur. Such as a constant loss of connection with the router, low Internet speed, and a lot of different and unimaginable problems.
I often ask that the Internet works on devices, only if they are located close to the router. (approximately within the room). And when they leave, the device gets shut down, and the Internet doesn’t work. I don’t know the exact reason why this problem arises, but it seems to me that it’s just the problem with strong overcodes. It is possible that there are already so many boundaries that there are simply no free channels. In this case, there is no need to disable technical problems with the router.
Now take your laptop or phone and see how many drone-free networks you have available for connecting. Your neighbors, of course, have routers installed, not just your Wi-Fi :), although everything is possible.
And perhaps one of these dartless measures works as often as yours. And through this there may still be low fluidity, unstable connection.
It’s good if the routers have TP-Link After washing, the channel selection is set to the position Auto. This means that the router itself is searching for a free channel and vikoristvuvatime yogo. And as far as I know the axis is on popular routers D-Link a channel was installed behind the scenes 7 . I axis two (and perhaps more) Such D-Link with standard settings already work on one channel.
Which channel should I set in my router settings?
If you don’t have a lot of Wi-Fi connections nearby, you don’t have to worry about changing the channel. I put it behind the tub. Ale Raju still install a static channel, not Auto. Why? I don’t know why this is so, but having noticed what’s in me 1 channel the signal is stronger, lower when the channel is automatically selected.
If you have a lot of channels, or all 13 are full, then you can set automatic search and select the largest channel.
It’s a good program for a computer, it’s called inSSIDer. With this help you can see what kind of channel you have, what kind of activities you have and how many things you do. In this way, you can select the right channel and enter it in the settings of the router. I will write about the work with the inSSIDer program in a separate article. I want the program itself to be simple and understandable.
Changing the channel on the router
Now that we have decided to change the channel for dartless tracking, now we will figure out how to do it.
On TP-Link routers
We go to the keruvannya panel. Addresses (zazvichay tse 192.168.0.1, or 192.168.1.1) and tribute (login and password are assigned to admin and admin) To enter the settings, you can look at the bottom of the router.
Go to the tab Wireless. I opposite the point "Channel" Set the required values.
To save changes, press the button "Save". Restart your router. You can earn money directly from the ceramic panel. Paragraph System Tools – Reboot, button "Reboot".
On D-Link routers
When setting up the router, go to the tab Setup – Wireless Setup. How to install, or the checkbox for the item is already installed Enable Auto Channel Selection This means that the router itself selects the appropriate channel. To install a specific channel, you need to check the Enable Auto Channel Selection checkbox and specify the required value in the Enable Auto Channel Selection item Wireless Channel.
Save settings by pressing the button “Save Settings”.
Compared to other routers, I think that this process does not take place in them. Look for channel changes on the Wi-Fi network tab.
All food is accepted from comments and on the forum :). All the best!
More on the site:
How to change the channel on a Wi-Fi router? Is it time to change the channel? updated: Cherven 7, 2013 by: admin