The instructions cover the power supply installation of the driver, connecting the CCP to a computer via a USB cable and fiscalizing the FN.
When connecting the ATOL CCP to a computer via a USB cable, data transfer to the OFD is required using the additional EoU (Ethernet-over-USB) technology. The required service is installed immediately from the driver trade property(DTO).
The ATOL:KKT driver with data transfer to the OFD (54-FZ) 10.x, developed in domestic architecture, consists of two parts: an integration component (supplied at the warehouse with the "1C" configuration) and the main driver supply (installed after with the help of the postmaster distribution it is usually downloaded from the postal owner’s website).
The main task of the integration component is to redirect clicks from the 1C configuration to the main installation of the driver. Basically, the driver's installation interacts directly with the equipment.
Installing the main driver
From the website of the ATOL company, download the DTO distribution kit version 10.4.2 or higher. For whose attention it is necessary to select a section Security software – DTO – 10.x. Vantage distribution Driver KKT 10.4.2.
The archive file in the Installer folder contains the following files:
- KKT10-10.4.2-windows32-setup.exe
- KKT10-10.4.2-windows64-setup.exe
Next, run the file KKT10-10.4.2-windows32-setup.exe if you are running a 32-bit 1C client.
Next, run the file KKT10-10.4.2-windows64-setup.exe if you are using the 64-bit 1C client.
Connect the ATOL cash register to your PC.
An exchange channel via USB has been installed for the promotional units. If another communication channel is selected, then to install a communication channel via USB you need to do the following:
- Vimknuti KKT (what is included).
- Press the check scroll button.
- Without releasing the button, press the cash register.
- Release the button after the fifth sound signal.
- The information in the service mode items is monitored. You can select an item by pressing the scroll button.
- Select service mode Exchange channel: Press the check scroll button twice.
- The information and parameters of the exchange channel are monitored.
- Select exchange channel USB: Press the check scroll button twice.
- Fight on the alert USB is closed, and the CCP will turn to service mode.
- Exit the service mode: press the check scroll button once - the cash register will go into operating mode.
Go to Device manager, know Porti (COM and LPT). When connected, two COM ports are created.
One virtual COM port for connecting a cash register, the other for the EoU data transfer service.
Because COM ports were not detected, but 2 appeared Invisible devices", then you need to install the driver for them: open the "Unknown device" card, press Onoviti driver I’ll show you the way by hand. The route to the driver is: C: Program Files (x86) ATOL Drivers10 KKT USB_Drivers.
After installing the driver, the ATOL icon will appear on the selected devices.
Checking the connection with the cash register
KKT ATOL can be connected to a PC via COM/VCOM or USB port. When connecting one CCP, it is recommended to select the communication channel via USB. If two or more CCPs are connected, it is recommended to select a communication channel via COM/VCOM.
When selecting a channel via USB: mode Powerful select from the list the model of the connected cash register and the channel link via USB. Press the button Checking the bundle.
When you select a channel, contact via COM/VCOM it is necessary to indicate additionally COM port, insert the port assigned to the device (our application has COM 4).
COM port:
atol-usbcom_proxy1 is used for connecting a cash register,
atol-usbcom_proxy2 – for the EoU data transfer service.
In the field Shvidkistost There may be a number installed 115200
.
After pressing the button Checking the bundle in the field Zv'yazok – Result We are sorry to inform you about the CCP model.
Checking the connection with the cash register channel via USB:
Checking the connection with the CCP channel via COM/VCOM:
Installing Ethernet over USB service
The service for robots via a USB cable (EthernetOverUSB) is installed simultaneously with the trading device driver.
The port for EoU is assigned automatically. If this is not the case, then you can specify the required port for communication with the OFD in the configured file, which is located in C:\ProgramData\ATOL\EoU V settings.xml. Register the port number and save the file.
Our application for EoU has an ATOL USB port (COM5), so we assign port number 5:
Important! Folder ProgramData Behind the thoughts there is an attribute of “holidays”. To use it, you need to open it received files that folders.
Inserting OFD parameters
Run the KKT driver test: Start – ATOL – KKT driver test.
Open the CCP setup, specify the OFD parameters: Vlastivosti - CCP parameters - 15 OFD - enter the OFD address, OFD port, select the exchange channel from the OFD - USB (EoU).
Press Zastosuvati.
Verification of the connection with the OFD
In the KKT driver test, open the tab lower rhubarb. Diagnostics is completed through sending the lower level command 82010600.
KKT driver test – Nizhniy riven- install ensign Withdrawn. In the field Buffer from the KKT command enter 82 01 06 00
- press the button Viconati team.
The CCT can provide a diagnostic check.
The connection of the cash register to the computer is completed.
Connection of ATOL cash register and fiscalization of FN in “1C: Rozdrib”
Creation of an instance of ownership that is connected
In separate Setting up equipment that connects ( Administration - possession that connects) it is necessary to install an ensign Vikoristovat ownership that connects.
Then you need to go to the agent Installation that is connected, for which it is necessary to press on the post Installation that is connected, that vibrati type of possession CCP due to data transfer.
The creation of a new instance of ownership requires the help of an additional command Creativity. We create a new element (press the button Creativity). In the form that has opened, you need to check what is installed Type of ownership: cash register with data transmission. Next, you need to select an organization under the name of which sales of goods are carried out on this fiscal registrar, enter the name and serial number of the cash register (factory number, indicated on the device body). In the field Owner driver Select the driver download from the list. Press the button Write an object.
After recording, connection parameters and operations with the FN will be available. Same with Vikni Connection and setup button will become available Nalashtuvati.
Self-installation of the driver integration component
Integration of the KKT ATOL 10.x driver component is included in the “1C:Property Libraries” warehouse that is connected. You can add components as needed independently.
For which track press the button Owner's Driver:
From the downloaded driver archive 10.4.2.zip it is necessary to tighten the component 1C. In "1C" we are pressing Add new driver z file- Select the selected folder of the 1C driver archives ATOL_KKT_10.zip then press the save button Write an object. Further pressure Options - Install driver.
After successful installation, the driver status will be displayed on the form – Installed, as well as the driver version.
Setting up connection to CCP
Press the button Nalashtuvati. It is necessary to check the form of driver adjustment and connection. Vibrati Model connected to the device, Port, COM port, Shvidkistost, specified in the driver settings. Press I'll attach a test. Speak up Test successfully viconano From the specified information about the connected CCP.
Registration of fiscal accumulator
After connecting the cash register to the program, you can register a fiscal accumulator, which was previously generated. This operation is also carried out when replacing the fiscal accumulator after the end of the term or when the memory resource is exhausted - the fiscal accumulator is closed, then the physical accumulator device is replaced There is a new one.
To carry out the registration operation, you must contact the program Administration - equipment that is connected - cash register with data transmission open the entry with the required cash register. Check the filling serial number(Obov'yazkova field of conservation). Rosekriti CCP parameters, install Method of format-logical control – Divide the rows, install Separation of format-logical control is allowed – 0,01 .
Vibrati point Registration from the list when you press the button Operations with fiscal accumulators.
The registration form appears. It is required: fill in the field Registration number of cash register number, get it at the time of registering your cash register with the FNP, check that the details of the organization have been filled in correctly, indicate CCP installation addresses, Place of carrying out rozrakhunki, select the payment system, fill in all other parameters, enter IPN OFDі Name OFD then press the button Continue the operation.
The cash register system may provide a receipt confirming successful registration.
Important! Increasing the parameter Data encryption sign- Non-negotiable operation. Encryption may be provided by the OFD with an additional service, check with the OFD before the fiscalization of the FN.
If you need to change the details of the organization, the parameters of the cash register, or replace the FN, it is also necessary in the menu Service vibrate Changing fiscal accumulator registration parameters.
Select the exit code for the reason for re-registration and set new parameters.
The cash register system may display a receipt confirming the successful re-registration of the cash register terminal.
Closing the fiscal accumulator- Non-negotiable operation.
After this Vikonannya Vikoristannya FN is unbearable.
If the cash register does not transmit data to the OFD, in the special account of the operator there will be a notification “do not receive documents from the cash register.”
First turn it over so that the touch is connected to the OFD. In the “cash” section, the order from the cash register is marked “connected to the OFD”. If the contact is connected, if you do not find the documents, turn over the link from the OFD.
What to do if data is not transferred to the OFD
- Check the data in the registration card on the FNP website with data in a special account. To do this, on nalog.ru go to the “Special account of the tax payer”, and then to the “Cash register equipment area”.
- From the list, select a cash register from which the data will not go to the OFD and click on “RN KKT”. After this, the cash register registration card will appear. Place them in a sealed window.
- Visit special office Contour.OFD and open the cash section. Obtain a list of cash registers in Excel.
- Please check your details in the file with the cash card on nalog.ru. If the data in a special account of Contour.OFD is changed, please return to the special account with the correct data.
The connection between the cash register and the OFD can be verified through the cash register utilities. The instructions are for a machine connected to a computer via USB. If the touch is connected otherwise, connect via USB.
Checking the connection with the OFD on the butt of the Atol cash register
- Press right button click on "Start". From the menu select “Computer service”. Click and go to “Services”.
- Select “EOU” or “EOUService” from the section and run. Since there is no such service, contact the central service center or the cashier for help.
Check the adjustment of the OFD
- Open “Start” and go to prick row enter KKM and launch the “KKM Driver” utility. Enable the cash register software to work with the utility without any penalties.
- Go to “Correction of authorities”.
- Select ownership parameters.
- Go to the OFD section and check the correctness of the adjustment.
- Addresses:
- IP addresses: 46.17.204.250
- Port: 7777
- DNS: do not specify it, set it to 0.0.0.0
- If the setup is correct, write a technical guide.
Online cashiers Athol are simply responsible for the visibility of a businessman who is engaged in trading activities via the Internet. However, various problems often arise, especially when checking the connection with the OFD. Why is such a procedure necessary, how to verify what benefits exist and how to correct them. We'll figure it all out in the report.
The procedure for verifying the connection with the OFD in Atol (30F, 90F)
To ensure that the online cash register works properly and does not cause everyday problems, it is necessary to diagnose the connection. The first verification is carried out in accordance with the obligatory procedure after registration of the cash register with the FNP, OFD and operation of the FN. If there is a problem, checks simply stop going to the OFD.
Step-by-step process (required to turn on the Internet) of diagnostics:
- launches the cash register (press the pressed key CL up to 6 sounds);
- pishov process. It takes about 5 hvilins.
This depends only on firmware versions 2908 and higher. When the version is lower than the price, the next steps will pass (through KKM driver on the selected device, to which FR is added):
- launch the program "KKT Driver Test";
- click on the “Lower River” menu;
- activate the item “Device disabled”;
- at "Mode" select "0-Select";
- You don’t have to enter the password, click on “Log In”;
- We say “Team flow” and write 82 01 06 00 in the row (lower level team);
- "Viconati" is under pressure - the process of launching.
If successful, in both cases, the following message will appear on the paper: Diagnostics completed successfully. If something goes wrong, a notification will appear: The diagnosis passed with mercy.
Benefits that appear at the time of diagnosis
The most common problems occur when verifying documents sent to Atol 30F and 90F e:
- The USB device is not connected (the cable is damaged, the connector of the cash register unit is not connected);
- problems with the GSM or WiFi module;
- connection to OFD daily;
- EoU supplement not found;
- crash the server;
And your favorite treats:
- 3895 dovzhina is incorrect;
- with a large number of unsent checks, it is possible that the FN will go out of order;
- OFD does not confirm;
Virus of various problems
- Wonder what you use the Internet, Wi-Fi or router (or connected through);
- ensure the effectiveness of cables, sockets, and CCP connections;
- It’s possible that it’s just wrong (repeat the diagnosis later);
- can be with keys, if the file can be declassified with secret keys. Turn the FN for a guarantee;
- make sure that you enter all commands correctly, that ports, addresses, and spaces are entered correctly;
- Perhaps it's just a server crash. Look forward to the good fortune and the elimination of faults;
- look at the EoU service log. If “socket close” is indicated, send a notification to the OFD and note why connection is not allowed;
- If the EoU service does not start, reinstall DTO as administrator;
- EoU not configured - the program that will provide access to the Internet is not open - Ethernet Over USB. Turn it over. Go to Start - Vikonati - write Services and run as administrator. In the registered list, search for EoU and set the parameters: Stan - Vikonuet; Startup type - Automatic.
Please know: there is a warning like this on the receipt: “OFD DOES NOT VIEW”, but the documents still get destroyed, and so on. Golovna, so that documentation was carried out.
We would like to monitor the sending of documents to the Podatkov, because if checks will not be sent for 30 days, the cash register will be blocked. And this means that no matter how operations are carried out with it, trading will slow down. What a waste of time and your money.
Visnovki
We figured out how to verify the connections from the OFD in Atol 30F, 90F, which is why you need to work, how to carry out such an operation and how to verify Possible mercy. Ensure that you enter everything correctly during registration and correctly protest the procedure (as indicated above), everything is correct and correct. Remember: it is necessary to test the connections immediately after registration, so that further problems do not arise later.
To verify the connection with the OFD on ATOL online cash desks, you need to run the KKT Driver Test (you can usually find the driver warehouse by clicking Start-ATOL-"KKM Driver"), check the box "Device enabled" and in the Select mode send lower level team 82 01 06 00 at the checkout.
You will receive a check from your account with detailed information about your contacts with external light and OFD of zocrem.
Here:
Channel zv'yazku- Method of connecting your account to the Internet. Available options: EoU – Internet access via Ethernet over USB service on a PC, Ethernet, WiFi.
USB device
- if a USB device is connected to the device (the command can be issued via COM or via ETHERNET);
Access to the Internet- the result of the Internet connection visibility test;
Connection to OFD- Result of testing in connection with the OFD;
What could go wrong when running the command to check the connection with the OFD?
- If you haven’t installed the cash register program, the testing utility does not deny access to the cash register and the “Device disabled” checkbox cannot be checked.
- You will also not be able to deny access to your account if the utility is not configured correctly to connect to your account;
What could possibly go wrong in the hour of checking the connection with the OFD?
- The main reason is that the Ethernet over USB (EoU) service has not been configured or has not been started. If the account is connected only to a PC via a USB channel, the EoU service is a single way to send checks from an ATOL account to the OFD.
- The connection to the OFD on the cash register is incorrectly configured - check with the authorities that the port and IP address of the cash register are configured.
- The parameters of the cash register may indicate the wrong channel for connection with the OFD - turn it over. Also on the same firmware... you need to set up a WiFi channel so that the transmission takes place via EoU.
- If everything is correct, contacts with the OFD and checks are not transferred, please call the OFD, perhaps because you do not have an active data transfer agreement, or the OFD with “their merkuvan” does not accept checks from cashiers.
The ATOL cash register can independently diagnose the connection with the OFD - it is not necessary to connect it to a PC. To carry out diagnostics, it is necessary:
- press the machine with the button pressed to scroll the receipt line;
- Wait for the fifth sound signal and release the button;
- Check until the CCT carries out diagnostics and interprets the result.
If your internet connection speed is low or there is a problem, the diagnostic process may take up to 5 minutes.
As a result, the client selects the document under the title “Diagnostics of connection with OFD”.
There are 4 interfaces that connect the cassette with the OFD: Ethernet, EthernetOverUSB, WiFi and GSM. The results of diagnostics for the skin look different. However, at any time there will be the basic technical parameters of the operator’s server, information about the communication channel between them and the connection and about the system (establishing connections). Also, regardless of the diagnostic results, the interface in the lower part of the check will contain the following data: date and hour, IPN of the customer, registration number CCP and fiscal accumulator number.
Connection via EthernetOverUSB
Successful diagnosis
If the connection between the cassette and the OFD is installed, the device will be notified that the diagnosis was completed successfully. The check will be based on the IP address or website address OFD, port, DNS, channel type (EoU). The check will also indicate that:
- The cash register is connected to a USB computer;
- the addition of data transmission to the operator has been started;
- Internet connection is installed;
- connection to the operator’s server e.
Pardon has been made
Pomilki can be one of three types:
Communication via Ethernet
Successful diagnosis
If no pardons are shown, the check will look like this:
The first block contains information about the address of the OFD website (or its IP), port, DNS, as well as the Ethernet connection channel. Below is information about the LAN module: mac addresses, IP type (dynamic or static), verification results local measures and those with the initialization module. The current unit has re-calibrated boundaries, and then provides confirmation that the touch is connected to the OFD.
Pardon has been made
When an Ethernet terminal is connected, two types of alarms may be triggered:
Call from GSM
Successful diagnosis
Once a successful diagnosis is made, it will look like this: 
There is a new order for setting the OFD data (site or IP, port, DNS) and the parameters of the CCP instance - a diagnostic unit for the modem. Here you can find information about the detected modem and SIM card installed mobile operator(Beeline), the transmission of mobile data is turned on and this is a pleasant signal. The device has access to the Internet and connections to the OFD server.
Pardon has been made
When connected via GSM, the following options are available:
Calling via WiFi
Successful diagnosis
Once the channel has been successfully diagnosed, the check will look like this:
In addition to the blocks already known to us with the technical parameters of the OFD server and information about the cash register, the receipt will contain data about the setup and diagnostics of the wifi module. There are two robotic modes for the cash register - station or access point. Next, enter information about the name of the router (SSID) and the password to access it (Password). Diagnostics of the wifi module can determine its presence, the presence of a connection to the access point, as well as the strength of the signal. Next, the IP address of the cash register is entered and it is confirmed that it is connected to the OFD server.
Pardon has been made
If the connections are established via wifi, then there can be 4 different types of connections:
