So it turned out that full-fledged firmware for the smartphone ZTE Blade AF3 it didn't happen. It was impossible to update from an SD card, which does not allow you to update the phone to a working state in a critical situation. Constant research from him directly allowed him to create several blocks for firmware in the PAC format. Blocks boot.img, wnvitem.bin, wmodem.bin, wdsp.bin, wcnnvitem.bin, wcnmodem.bin, u-boot-spl-16k.bin, u-boot.bin The update is saved from the SD card. Blocks recovery.imgі system.img extracted from backup created via Terminal. Filey fdl1.bin, fdl1.binі SC7731_2341A installed on the firmware of a phone with similar characteristics. And it has already allowed us to renew those stuck on Recovery phone number at the outlet I described on the next page - .
November 29, 2015. The trial version of the firmware has been downloaded and the first process of flashing the firmware on the phone has been completed. ZTE Blade AF3 through the program ResearchDownload_R2.9.9005 fragmented with firmware. You turned out to be successful. As you can see in the following video:
And also, among others, deodexation of supplements was carried out ZTE Blade AF3. A small demonstration video with the results can be viewed below:
The first results turned out to be encouraging, and I have already prepared a working version of the firmware for the final purpose of the phone.
Її features: deodexed, є awakening Ruth ( Kinguser), replacing the standard launcher with MM Launcher, there are changes in the customer programs, but here it was revealed after turning on the phone that they didn’t want to install a bunch of add-ons, because they wanted to be in the dad prelodapp firmware data ( Twitter, Facebook, UCBrowser ta inshi). And those that have arisen, I have chosen and protected their interests ( Terminal, HeadsUP, Lollipop_Lockscreen).
Firmware process
Enter and unpack archives Blade_AF3_v1.0.1_DEODEX_m002.rar have a directory on your computer. There is firmware for the PAC format. Blade_AF3_v1.0.1_DEODEX_m002.pac that program ResearchDownload_R2.9.9005.
Then you need to download, unpack and install the drivers on your computer . The program starts immediately DPInst.exe relevant information operating system desktop PC. Then the program starts ResearchDownload And the phone is connected (pull out the battery first and insert it back) with the sound button pressed - bottom edge. After a second or two, the phone must register with the computer and the driver requirements will be installed.
The program freezes for a little while, processing the file and in a short hour, press another button next to the first one near the sight of two small gears. A window will open asking you to switch to another tab. Options There should be a check mark opposite the item. Repartition.
Then press OK! And then press the button Play near the arrow on the smartphone, press the sound button (bottom edge - the battery must first be pulled out and inserted back) and connect the phone to the computer. The firmware process will begin to slow down,
What a trifle a bunch of quills are and I’ll end up writing in a row - Passed when the process is completed happily, as in my case.
Then press the button Stop You will see a square and insert the phone into the cable, remove and insert the battery back and press down the smartphone. The system will begin to become fascinated, as trivatime hvilin 5-10. Then, the first input to the system and after these adjustments, such a work table is opened.
And this is what my version (not the residual) of the desktop looks like 5 weeks after the firmware.
Pre-order for those who want to flash this firmware. This firmware can be modified by sizing the memory from the standard one stock firmware ZTE Blade AF3 and the inheritance may not be transferable. Everything you do is at your own risk.. (NOTE Also, you can update the factory version with updates from the SD card via Recovery)
Enchant your security software(the firmware itself is the program ResearchDownload_R2.9.9005) you can move beyond the next step— (deodexed incompletely, with little system memory, internal memory phone 1.5 GB).
On this page we will not describe the pros and cons of this Android devices, we are very aware of your comments about devices. Here you will find and be able to download custom original firmware, official version MIUI firmware v4, MIUI v5 android from our website, and you can also marvel video instructions for installing the firmware For ZTE Blade AF3, remove the audio.
In order to download the firmware for your phone ZTE Blade AF3 With Android 7.0 Nougat (Nougat), Android 6.0 Marshmallow (either Android M or Marshmallow) or Android 5.0 Lollipop (Lollipop), you need to read the entire page and know the instructions. There are also Android firmware KitKat 4.4.x (Kitkat) and Android 4.3 Jelly Bean (Jelly Bean), as well as older versions, but it is not recommended to use them, since the software is outdated. The fifth version of Android has progressed far ahead of its predecessors, not to mention the 6th and 7th versions, refined to the last detail. Below you will find a look at the rest Android versions And you can equalize them.
Don't forget to write a full review about this model in the comments. This way you can help other merchants make decisions about purchasing a device.
Firmware availability: to be obvious.
Upgrade the firmware
When posting to our website through the comment system, do not forget to enter your reference email if you require consultation and you were not able to install the firmware following our instructions. Instructions for firmware can be found on the website. Our assistance seems to be a cost-free consultation, and therefore there may be delays in our reports, which is why there are plenty of people willing to do so. The latest firmware for ZTE Blade AF3 You can earn it either through a torrent with Russian instructions, or directly without downloading files and other devices.
Installation instructions
- Click on the download option, selecting the firmware you need
- Vantage Android firmware M – we verified you, honestly M – not Marshmallow, follow the other message
- Upload the file with the firmware and add-on
- Run the program file
- Select the required firmware version
- Compile instructions from a file archive
Video about ZTE Blade AF3 firmware
I'll adjust the price
The price of the local currency is based on the dollar exchange rate.
Korisni poslannya
Root rights to ZTE Blade AF3
If you want to remove root rights, I recommend that you quickly use the program Rootkhp for the computer - this is one of the new programs with a large base of supported smartphones and tablets on Android. The program only works under keruvannyam Windows for systems Linux families It is recommended that Mac OS be run faster by emulators.
You can download the program without cost from the official website Rootkhp.pro, which is easy to navigate through Google.
How to unlock a pattern key
Removing a forgotten pattern key, regardless of its complexity, has ceased to be a global problem for simple koristuvach, who knows little about the mechanisms of operative healing Android systems and with loopholes. We recently came across a program for unlocking the pattern key Gaigunlock (Gaigunlosk). Pokrokov's instructions Russian mine and description of the work of the program was published as requested.
Perhaps, for each ZTE model there is not as much official and custom firmware as for the ZTE Blade. As one of them is the best firmware for ZTE Blade, it’s difficult to say, but it has special similarities.
Before you look at the different firmware options for the ZTE Blade, it’s important to know what Denmark smartphone Available in two versions: Gen1 and Gen2. Significantly, Gen can use the additional Ask Mr Pigfish program, developed specifically for the ZTE Blade. You can purchase it freely from the Google Market. Gen2 has several advantages over Gen1, such as improved signal strength, HSUPA support, 850MHz band for GSM and 3G, and the ability to install new versions of Syanogenmod.
Instructions for moving from Gen1 to Gen2
It is transferred that ClockworkMod Recovery and drivers are already installed.
- We download the firmware or put it on the SD card of the phone.
- It is downloaded and sent to the memory card - stock vector.
- On the switched-off smartphone, press the button “-” and “on” and go to ClockworkMod Recovery, then install the recovery download via CWM as an update. After installing Reboot
- We store archives with a number of sections (cache; system; data). In this version, 136 megabytes are visible for the system, and more than 2 megabytes for the cache.
- Unpacking archives on PC
- We wipe the smartphone, then press the “-” and “on” buttons, and when the FTM message appears, we connect the phone to the PC.
- In the unpacked archive, the reorganized partitions run download_nochecksGen2.exe, press Start and do not read anything until a notification appears about the completion of the installation. Once completed, emboss approx.
- Go to “advanced” and select “Reboot Recovery”.
- CWM will restart, after which you install SS RLS4b or CyanogenMod from CWM (when installing SS RLS4b, write your generation to the Gen2 device).
- Let's look at the Backup file Channel1.nvm, which appears after switching to Gen2, for the father who ran download_nochecksGen2.exe. It is necessary to save information about IMEI during the transition to Gen1.
If after the transition there were problems when launching CWM, but the firmware was installed, then install OneClickRecovery_ver2.apk and launch it. You can encrypt the file.
Universal instructions for flashing ZTE Blade firmware using CWM
It is transferred that CWM and firewood are already installed on the phone. Bazhana CWM installed version 3.0.1.4, which is suitable for firmware 2.2 and 2.3.
- We need the required firmware.
- Connect a USB cable.
- Let's go to Recovery.
- If the firmware has an a2sd version, then we continue from the previous point, otherwise we format/partition the flash drive by selecting in the “advanced” menu - “partition sd - ext = 512, swap = 0, fat = automatically will be different”. A cheap flash drive may cause problems. In this case, you need to format the SD card on your computer in fat32, and then install the firmware, then split the flash drive and wipe the new wipe. If the firmware becomes crooked, you need to flash it again.
- Robimo “wipe data/factory reset”, “wipe cache partition”, not necessarily, but you can also “wipe battery”
- We copy the firmware to a flash drive without unpacking it (if you have a PC with a smartphone from CWM, select “mount USB storage” from the “mounts-and storage” menu, if you copy everything that is required, press “unmount”).
- Select from Recovery “install” zip from sdcard" we install the firmware.
- When finished, select “reboot system now”, after which the phone will restart.
This method is suitable for installing the update on the ZTE Blade.
Before updating, you can easily update the OS of your device to version 2.2 through customization. Vantage for ZTE Blade updated Firmware up to version FRY_RU_P729VV1.0.0B01 (OS version: Android 2.2) is possible. The archive contains instructions for installing the latest Russian language.
Quantity is significant official firmware In addition, you can download the firmware for ZTE Blade there, and for completeness, there is also a table with firmware OS versions 2.1 and 2.2, where you can find out a lot of information about required firmware. When you are enchanted, don’t forget to turn on the display (TFT or OLED).
Installed on ZTE Blade firmware 2.3 7 You can watch this video.
Take a look at the ZTE Blade 4.0.4 firmware, and you can also get information about the installation from this video.
To install the ZTE Blade android 4.0 firmware, you need to resize the partitions, the author confirms that without worrying, everything was restored normally. This one has ICS ColdFusionX CM9 Release 9 installed. Tobto. This firmware was installed, just like any other custom firmware.
How to update your security software?
We give it to you different ways software updates, and also: updates for additional memory cards or updates “on the fly”.
To update “over the air,” you need to connect to a drone-free Wi-Fi or GSM Internet connection and check the availability of the update with your settings.
Why should you work if the operating time of the device does not coincide with the operating hour, as stated by the driver?
The smartphone is not foldable electronic device, which includes the functions of the gut computer and Stilnikov phone And it retains neutral energy for the operation of these functions. The main amount of energy is spent on the operation of the display module and the GSM transmitting path. Display brightness is automatically set to maximum when there is too much brightness more middlebrow(sleepy day) or get established at the koristuvach manual mode. Maximum brightness equals maximum energy. When using GSM and with stable and stable reception “at maximum”, the device uses a minimum amount of energy to maintain communication. In times of instability weak signal As a result, the device requires more energy to support the connection. When “Search for Merezha” in the zone of presence of the Merezh, the device maintains the maximum amount of energy that is expended in searching for nearby base stations. To change the energy consumed by your phone you will need:
1. Turn on GPS if not necessary.
2. Vimknuti mobile internet if nothing else is needed.
3. Turn it on or delete your add-ons, so don’t get into trouble, because stinks in the active state contribute to the internal resources of the device.
What should you do if your phone is frozen, won’t pick up, or will restart?
The reason for restarting or freezing in most cases is another security program or program.
1. From now on, we recommend that you update the standard factory settings (save the information you need in advance). If the phone is turned off, select the “reset to factory settings” function from the menu. If the machine does not heat up, turn the machine off Recovery mode" and select "wipe data/factory reset". The method of enabling "Recovery mode" is described below in the paragraph "How to enter Recovery mode?".
2. Since resetting to factory settings does not help, update the security software. The methods for updating the software are described in the paragraph “How to update the software?”.
3. If updating the software did not help, contact the nearest Authorized Service center ZTE.
How to make a reserve for saving your money, notebook chi "Back up"?
Є 3 ways to earn "Back Up":
1. On your phone, in the “Updates and discounts” submenu, check the box for updates.
2. You can transfer required information on the computer vikoristovuchi USB cable.
3. You can use “Back Up”, a third-party program from Vikorist.
What's wrong if I don't remember the password or pattern key to unlock the screen?
If you forgot your pattern key or digital password To unlock the screen, you need to carry out the reset procedure to factory settings: 1. Press the device in “Recovery mode” and select “wipe data/factory reset”. 2. If the procedure does not follow, you need to contact the ZTE Authorized Service Center.
How can you use dartless devices (Wi-Fi, BT)?
1. Turn down Wi-Fi on the configured device. Click on the Wi-Fi icon and you will see Wi-Fi connections on the screen.
2. The device automatically searches for active Wi-Fi network the access zone is 5 to 50 meters from the access point (depending on the strength of the access point).
3. Select the required measure and click on it. Yakshcho dartless fence password protected, enter yogo.
4. After connecting to the required level, a Wi-Fi icon will appear on the device’s head screen.
How to turn off Internet distribution on your phone (USB modem or WiFi router)?
There are two ways to slow down Internet sharing on your phone. The first way is to enable distribution as a USB modem, the second is to enable distribution as a WiFi router. Check to see if your device has access to the Internet to distribute it:
1. USB modem – this method is used for distributing the Internet to a computer. Connect your phone to your computer using an additional USB cable and allow access to your data. "Settings->Bezrotovі measures->More" Modem mode - check the USB modem box." Then the phone will start distributing the Internet to the computer. For distribution, uncheck the USB modem box or simply unplug the cable connection.
2. WiFi router - be sure to have a stable Internet connection via mobile measure or USB. "Adjustment->Bezdrotovy merezhi->More" Modem mode - check the "WiFI access point" box. For zakhistu dartless connection Click on the icon of the access point, then click on "Point WiFi access". In this menu you can set a name and password for your dartless WiFi connection. Your phone is just like a WiFi router. To select the distribution option, uncheck the "WiFi router" box
How can you quickly check the charging status?
When charging is complete, press the power button. The battery charge status will be shown on the phone's head screen.
Why volume free memory The device is smaller, as stated by the manufacturer?
In addition to the processor, which has its own built-in memory, other devices, such as a video processor, audio processor and other devices that are included before element base The central board will support the memory resources of the koristuvach. A certain amount of memory is previously reserved for internal needs, and the internal memory is used whenever it is renewed.
What types of blocking can be done against vikors?
Є 3 see the screen is blocked. Select one of the types of blocking in Settings -> Security -> Screen blocking.
1. Blocking graphic key
2. Blocking with PIN code 3. Blocking with password
Yak working temperature ZTE phones?
The operating temperature ranges from (-10C) to (+50C).
What does ROOT mean?
ROOT means "administrator rights". ROOT gives you the ability to change system files, change the system, install test programs and terminate other activities. ROOT rights are received from customers, but can be activated at different times.
Be respectful, be careful with ROOT rights may damage your operating system.
How to enter Recovery mode?
With the power turned off, press and hold the volume (increase+) button and the power button for one hour.
Why bother if the battery is not charged to 100%?
The battery of the device is designed in such a way that it dissipates part of the removed charge and can be recharged further. This feature is intended to protect the battery and increase its efficiency. If the battery does not charge more than 80%, contact a ZTE Authorized Service Center.
How can I add Google account record into the device?
1. The first time you open your smartphone, you will be prompted to register new Google oblikovy record or vikorystuvati already esnuyuchy. This is not an obligatory procedure.
2. To add an account account at any time, you can register a new one or change the existing account account: Setup->Accounts and “add an account account.”
How to improve USB power? How can I access the “For Retailers” menu?
Go to “Settings->About phone->Tap on “Package number” several times. Then you will have access to the “For Retailers” submenu. In this submenu, “USB connectivity” and other functions for retailers are available
How to connect your phone to your computer?
To install the driver (automatically), select these operations.
1. Connect your phone to your computer.
2. When connected, select " Virtual disk" or "Virtual CD" depends on the model.
3. Your computer can show up additional disk, run “Autorun.exe” on the new one and install the driver
4. If the drivers are not installed, go to “Settings->For Customers” and click “Disk Driver”. (Click on "Build version" 10 times
5. When turned on ( USB installation) the driver will also be installed automatically.
What do the letters E, G, H mean?
When data transfer to the phone is active on the panel (indication of the received signal, battery capacity, etc.) the following symbols appear:
- E means active robot to EDGE protocol
- G means active GPRS protocol
- H means the active protocol is HSDPA, which is partly WCDMA
IMPORTANT INFORMATION:
Retail on Narazi In addition, there are two upgrade options for ZTE Blade AF3 in charge of the audit of the entry on the phone. For whom do you need to admire the battery and in the third row, pay attention even after S/N: letter X (S/N: X…… – firmware 1.0.0 or S/N: ….. – firmware 1.0.6) and so you need more software for the next step - http://myzte.ru/support/?cat=blade&model=blade-af3-
1. Competition among phone manufacturers is stimulating companies to quickly release new models and brands, everything is clear - “ the company guarantees“Then budget options come out most often underutilized software security. And after a short hour, the PZ specialists begin to gradually correct the flaws. How much more can you pay for everything with your smartphone? ZTE Blade AF3. Announced at Lipny Tsyogo Rock (2015), and at Veresny the first update is already ready.
And immediately I report - as if I were honest:
To install, I downloaded the required update and went to the support site for this phone.
Unzip it on your computer and download the zip file to the SD card update to the root directory (do not place them in other folders).
І move through the menu using the button Sound- by selecting " apply update from external storage» - pressing the button lively
In the next window, select a file update.zip and pressing the button again lively. Once the process began, it took about 5 minutes.
The menu appears again Recovery and the remaining row of text on the screen looked like this - “... Install from sdcard complete“, which meant that the process was completed with success. After pressing the Life button, the system began to grow.
2. Update
There are two update options - by “repeat” and from an SD card.
In order to check the update again, you need to go to Setting up smartphone ZTE Blade AF3 to the tab - Dodatkovo > About the phone
and select the item System updates. A window will open when you press the button Check the update We will check whether updates are available for the software installed on the phone.
How to earn updates according to the “renewal” You can watch this video:
How to upgrade from SD card- On this video:
INFORMATION BEFORE VIEWING: UPDATES AVAILABLE FOR VERSIONS 1.01 AND 1.0.6 PRESENT ON THE SITE SUPPORTING IMPROVEMENTS —
The problems are the same: Years ago it became clear that the rich rulers ZTE Blade AF3(Although not for everyone) after updating to version 1.0.3, problems occurred due to the phone being connected externally in sleep mode. Updating version 1.0.1 was not so easy. Vipadkovo znayshov zabekapene Recovery as of version 1.0.1.. Installation and subsequent update to the lower version was successful. But don’t be afraid like that.