Information about the brand, model and alternative names of a specific device, if any.
Design
Information about the dimensions and weight of the device, presented in different units of measurement. Materials used, offered colors, certificates.
| Width Width information - refers to the horizontal side of the device in its standard orientation during use. | 66.5 mm (millimeters) 6.65 cm (centimeters) 0.22 ft (feet) 2.62 in (inches) |
| Height Height information - refers to the vertical side of the device in its standard orientation during use. | 134.8 mm (millimeters) 13.48 cm (centimeters) 0.44 ft (feet) 5.31 in (inches) |
| Thickness Information about the thickness of the device in different units of measurement. | 9.9 mm (millimeters) 0.99 cm (centimeters) 0.03 ft (feet) 0.39 in (inches) |
| Weight Information about the weight of the device in different units of measurement. | 125 g (grams) 0.28 lbs (pounds) 4.41 oz (ounces) |
| Volume The approximate volume of the device, calculated based on the dimensions provided by the manufacturer. Refers to devices with a rectangular parallelepiped shape. | 88.75 cm³ (cubic centimeters) 5.39 in³ (cubic inches) |
| Colors Information about the colors in which this unit is offered for sale. | The black |
| Materials for making the body Materials used to make the device body. | Plastic |
SIM card
The SIM card is used in mobile devices to store data that certifies the authenticity of mobile service subscribers.
Mobile networks
A mobile network is a radio system that allows multiple mobile devices to communicate with each other.
| GSM GSM (Global System for Mobile Communications) is designed to replace the analog mobile network (1G). For this reason, GSM is often referred to as a 2G mobile network. It is enhanced by the addition of GPRS (General Packet Radio Services) and later EDGE (Enhanced Data rates for GSM Evolution) technologies. | GSM 850 MHz GSM 900 MHz GSM 1800 MHz GSM 1900 MHz |
| UMTS UMTS stands for Universal Mobile Telecommunications System. It is based on the GSM standard and refers to 3G mobile networks. Developed by 3GPP and its biggest advantage is to provide more speed and spectral efficiency thanks to W-CDMA technology. | UMTS 850 MHz UMTS 900 MHz UMTS 1900 MHz UMTS 2100 MHz |
| LTE LTE (Long Term Evolution) is defined as a fourth generation (4G) technology. It is developed by 3GPP based on GSM / EDGE and UMTS / HSPA with the aim of increasing the capacity and speed of wireless mobile networks. The subsequent development of technologies is called LTE Advanced. | LTE 800 MHz LTE 850 MHz LTE 900 MHz LTE 1800 MHz LTE 2100 MHz LTE 2600 MHz |
Mobile technology and data rates
Communication between devices in mobile networks is carried out using technologies that provide different data rates.
Operating system
An operating system is the system software that controls and coordinates the operation of hardware components in a device.
SoC (System on a Chip)
A system on a chip (SoC) incorporates all of the major hardware components of a mobile device into a single chip.
| SoC (System on a Chip) A system on a chip (SoC) integrates various hardware components such as a processor, graphics processor, memory, peripherals, interfaces, etc., as well as the software required for their operation. | MediaTek MT6735M |
| Technological process Information about the technological process by which the chip is manufactured. The value in nanometers is half the distance between the elements in the processor. | 28 nm (nanometers) |
| Processor (CPU) The main function of the processor (CPU) of a mobile device is to interpret and execute instructions contained in software applications. | ARM Cortex-A53 |
| Processor size The capacity (bits) of the processor is determined by the size (in bits) of registers, address buses and data buses. 64-bit processors offer better performance than 32-bit processors, which, in turn, are more powerful than 16-bit processors. | 64 bit |
| Instruction set architecture Instructions are commands with which the software sets / controls the processor. Information about the instruction set (ISA) that the processor can execute. | ARMv8-A |
| Level 1 cache (L1) The cache memory is used by the processor to reduce the time it takes to access more frequently used data and instructions. L1 (level 1) cache is small and is much faster than both system memory and other levels of cache. If the processor does not find the requested data in L1, it continues to look for it in the L2 cache. On some processors, this search is performed simultaneously in L1 and L2. | 32 KB + 32 KB (kilobytes) |
| L2 cache L2 (level 2) cache is slower than L1, but instead has a larger capacity, allowing more data to be cached. It, like L1, is much faster than system memory (RAM). If the processor does not find the requested data in L2, it continues to look for them in L3 cache memory (if available) or in RAM memory. | 512 KB (kilobytes) 0.5 MB (megabytes) |
| Number of processor cores The processor core executes program instructions. There are processors with one, two or more cores. Having more cores increases performance by allowing multiple instructions to execute in parallel. | 4 |
| CPU clock speed The clock speed of a processor describes its speed in cycles per second. It is measured in megahertz (MHz) or gigahertz (GHz). | 1000 MHz (megahertz) |
| Graphics processing unit (GPU) A graphics processing unit (GPU) handles computation for a variety of 2D / 3D graphics applications. In mobile devices, it is most commonly used by games, consumer interfaces, video applications, and more. | ARM Mali-T720 MP1 |
| Number of GPU cores Like a processor, a GPU is made up of several working parts called cores. They handle the graphical computing of various applications. | 1 |
| GPU clock speed Speed \u200b\u200bis the clock speed of the GPU and is measured in megahertz (MHz) or gigahertz (GHz). | 500 MHz (megahertz) |
| The amount of random access memory (RAM) Random access memory (RAM) is used by the operating system and all installed applications. The data that is saved in RAM is lost after the device is turned off or restarted. | 1 GB (gigabytes) |
| Memory type (RAM) Information about the type of random access memory (RAM) used by the device. | LPDDR3 |
| Number of RAM channels Information about the number of RAM channels which are integrated into the SoC. More channels means higher data rates. | Single channel |
| RAM frequency The frequency of the RAM determines its speed of operation, more specifically, the speed of reading / writing data. | 533 MHz (megahertz) |
Built-in memory
Each mobile device has built-in (non-removable) fixed memory.
Memory cards
Memory cards are used in mobile devices to increase the storage space for data.
Screen
The screen of a mobile device is characterized by its technology, resolution, pixel density, diagonal length, color depth, etc.
| Type / technology One of the main characteristics of the screen is the technology by which it is made and on which the image quality of information directly depends. | TFT |
| Diagonal On mobile devices, screen size is expressed in terms of the length of its diagonal, measured in inches. | 4.5 in (inches) 114.3 mm (millimeters) 11.43 cm (centimeters) |
| Width Approximate screen width | 2.2 in (inches) 56 mm (millimeters) 5.6 cm (centimeters) |
| Height Approximate screen height | 3.92 in (inches) 99.64 mm (millimeters) 9.96 cm (centimeters) |
| Aspect ratio The aspect ratio of the long side of the screen to its short side | 1.779:1 |
| Resolution Screen resolution indicates the number of pixels horizontally and vertically on the screen. Higher resolution means sharper image detail. | 480 x 854 pixels |
| Pixel density Information about the number of pixels per centimeter or inch of the screen. Higher density allows information to be shown on the screen in clearer detail. | 218 ppi (pixels per inch) 85 ppcm (pixels per centimeter) |
| Color depth Screen color depth reflects the total number of bits used for color components in one pixel. Information about the maximum number of colors the screen can display. | 24 bit 16777216 flowers |
| Screen area The approximate percentage of the display area on the front of the device. | 62.45% (percent) |
| Other characteristics Information about other functions and features of the screen. | Capacitive Multitouch |
Sensors
Different sensors perform different quantitative measurements and convert physical metrics into signals that the mobile device recognizes.
Main camera
The main camera of a mobile device is usually located on the back of the body and is used for taking photos and videos.
| Flash type The most common types of flashes in mobile cameras are LED and Xenon flashes. LED flashes give softer light and, unlike brighter xenon ones, are also used for video shooting. | LED |
| Image Resolution One of the main characteristics of mobile device cameras is their resolution, which shows the number of pixels horizontally and vertically in an image. | 2592 x 1944 pixels 5.04 MP (megapixels) |
| Video Resolution Information about the maximum supported resolution for video recording by the device. | 1280 x 720 pixels 0.92 MP (megapixels) |
| Video - frame rate / frames per second. Information about the maximum number of frames per second (fps) supported by the device when shooting video at maximum resolution. Some of the main standard video capture and playback speeds are 24p, 25p, 30p, 60p. | 30 frames / sec (frames per second) |
| Characteristics Information about other software and hardware features associated with the main camera to improve its functionality. | Autofocus Burst shooting Digital zoom Geographic tags Panoramic shooting HDR shooting Touch focus Face recognition Adjusting the white balance ISO setting Exposure compensation Self-timer Scene selection mode |
Additional camera
Additional cameras are usually mounted above the screen of the device and are used mainly for video calls, gesture recognition, etc.
Audio
Information on the type of speakers and audio technology supported by the device.
Radio
The radio of the mobile device is a built-in FM receiver.
Locating
Information about the navigation and positioning technologies supported by the device.
Wi-Fi
Wi-Fi is a technology that enables wireless communication for transferring data over short distances between various devices.
Bluetooth
Bluetooth is a standard for secure wireless transfer of data between different types of devices over short distances.
USB
USB (Universal Serial Bus) is an industry standard that allows different electronic devices to exchange data.
Headphone jack
This is an audio connector, which is also called an audio connector. The most widely used standard in mobile devices is the 3.5mm headphone jack.
Connecting devices
Information about other important connection technologies supported by the device.
Browser
A web browser is a software application for accessing and viewing information on the Internet.
Video file formats / codecs
Mobile devices support different video file formats and codecs, which respectively store and encode / decode digital video data.
Battery
Mobile device batteries differ in their capacity and technology. They provide the electrical charge required for their function.
| Capacity The capacity of a battery indicates the maximum charge it can store, measured in milliampere-hours. | 2200 mAh (milliampere-hours) |
| A type The type of battery is determined by its structure and, more precisely, by the chemicals used. There are different types of batteries, with the most common mobile devices using lithium-ion and lithium-ion polymer batteries. | Li-Ion (Lithium-ion) |
| Talk time 2G Talk time in 2G is the period of time during which the battery charge is completely discharged during a continuous conversation on a 2G network. | 6 h (hours) 360 min (minutes) 0.3 days |
| Standby time 2G Standby time in 2G is the period of time during which the battery charge is completely discharged when the device is in stand-by mode and connected to a 2G network. | 360 h (hours) 21600 min (minutes) 15 days |
| Talk time 3G Talk time in 3G is the period of time during which the battery charge is completely discharged during a continuous conversation on a 3G network. | 6 h (hours) 360 min (minutes) 0.3 days |
| 3G standby time Standby time in 3G is the period of time during which the battery charge is completely discharged when the device is in stand-by mode and connected to a 3G network. | 360 h (hours) 21600 min (minutes) 15 days |
| Characteristics Information about some additional characteristics of the device battery. | Removable |
Specific Absorption Rate (SAR)
SAR level refers to the amount of electromagnetic radiation absorbed by the human body when using a mobile device.
| Head SAR (US) The SAR level indicates the maximum amount of electromagnetic radiation that the human body is exposed to when holding a mobile device near the ear. The maximum value used in the USA is 1.6 W / kg per gram of human tissue. US mobile devices are controlled by CTIA and the FCC conducts tests and sets their SAR values. | 1.027 W / kg (Watts per kilogram) |
| Body SAR (US) The SAR level indicates the maximum amount of electromagnetic radiation that a person's body is exposed to when holding a mobile device at hip level. The highest SAR value in the United States is 1.6 W / kg per gram of human tissue. This value is set by the FCC and CTIA monitors mobile devices for compliance with this standard. | 1.148 W / kg (Watts per kilogram) |
How do I update the software?
We provide you with different ways to update the software, namely: update using a memory card or update "over the air".
To update "over the air", you need to connect to a wireless network Wi-Fi or GSM Internet connection and check for updates in the settings.
What if the operating time of the device does not coincide with the operating time declared by the manufacturer?
A smartphone is a complex electronic device that includes the functions of a pocket computer and a cell phone, and consumes a large amount of energy to operate these functions. The main amount of energy is spent on the operation of the display module and the GSM transmit-receive path. The brightness of the display is automatically set to maximum in very bright environments (sunny day) or manually set by the user. Maximum brightness consumes maximum power. During GSM operation and with stable and stable reception "at maximums" the device consumes a minimum amount of energy to maintain communication. In case of an unstable and weak network signal, the machine needs more power to maintain communication. In the case of "Search Network" in an area with no network, the device consumes the maximum amount of energy, which is spent on searching for the nearest base stations. To reduce the energy consumed by the phone, you need:
1. Disable GPS if not required.
2. Disable mobile internet if you don't need it.
3. Disable or remove unnecessary unused applications. they are active and consume the internal resources of the apparatus.
What should you do if the phone freezes, does not turn on or reboots?
Most of the time, third-party software or programs are responsible for the restart or freeze.
1. Initially, we recommend that you restore the default factory settings (after saving the information you need). If the phone turns on, select the "factory reset" option in the device menu. If the device does not turn on, turn on the device in "Recovery mode" and select "wipe data / factory reset". The way to enable "Recovery mode" is described below in "How to enter Recovery mode?"
2. If a factory reset does not help, update the software. The software update methods are described in the "How to update the software?"
3. If updating the software does not help, contact your nearest ZTE Authorized Service Center.
How do I back up my data, notebook or Back-up?
There are 3 ways to do Back Up:
1. In the phone settings, in the "Restore and reset" submenu, check the box for restore.
2. You can transfer the necessary information to your computer using a USB cable.
3. You can back up using a third party program.
What if I forgot my password or pattern to unlock the screen?
If you have forgotten your pattern or digital password to unlock the screen, you need to perform a reset to factory settings: 1. Turn on the device in "Recovery mode" and select "wipe data / factory reset". 2. If the procedure is not followed, it is required to contact an Authorized ZTE Service Center.
How to use wireless networks (Wi-Fi, BT)?
1. Turn on Wi-Fi in the device settings. Click on the Wi-Fi icon and you will be taken to the Wi-Fi network management screen.
2. The device will automatically start searching for active Wi-Fi networks in the access zone from 5 to 50 meters to the access point (depending on the power of the access point).
3. Select the network you need and click on it. If your wireless network is protected by a password, enter it.
4. After connecting to the desired network, the Wi-Fi icon will appear on the main screen of the device.
How to turn on the distribution of the Internet on the phone (USB modem or WiFi router)?
There are two ways to enable tethering on your phone. The first way is to enable sharing as a USB modem, the other is to enable sharing as a WiFi router. Make sure that your device has access to the Internet in order to distribute it:
1. USB modem - the method is used to distribute the Internet to a computer. Connect your phone to your computer using a USB cable and allow data access. "Settings-\u003e Wireless networks-\u003e More" Modem mode - check the USB modem checkbox. Then the phone will start distributing the Internet to the computer. To stop the distribution, uncheck the USB modem or simply disconnect the cable connection.
2. WiFi router - make sure you have a stable internet connection via a mobile network or USB. "Settings-\u003e Wireless networks-\u003e More" Modem mode - check the "WiFI access point" checkbox. To secure your wireless connection, tap on the hotspot icon then tap WiFi hotspot. In this menu, you can set a name and password for your wireless WiFi connection. Your phone will start working as a WiFi router. To stop distribution, uncheck "WiFi router"
How can I quickly see the charging status?
Press the power button while charging. The battery charge status will be shown on the main screen of the phone.
Why is the volume of free memory of the device less than stated by the manufacturer?
Unlike a processor, which has its own built-in memory, other devices, such as a video processor, an audio processor, and other devices included in the element base of the device's central board consume user memory resources. A certain amount of memory is previously reserved for internal needs, but in case of an overflow, user memory is used.
What types of device lock can I use?
There are 3 types of screen lock. Select one of the lock types in Settings -\u003e Security -\u003e Screen lock.
1. Locking with a pattern
2.Pin lock 3.Password lock
What is the operating temperature of ZTE phones?
The operating temperature ranges from (-10C) to (+ 50C).
What does ROOT mean?
ROOT is "administrator rights". ROOT allows you to change system files, change the system, install test programs and perform other actions. ROOT rights are hidden from users, but can be activated if necessary.
Be careful, careless handling of ROOT rights can harm your operating system.
How to enter Recovery mode?
In the off state, simultaneously hold down the volume button (increase +) and the power button.
What to do if the battery does not charge 100%?
The battery of the device is designed in such a way that it dissipates a part of the received charge and can subsequently be recharged. This feature is designed to protect the battery and increase its performance. In the event that the battery does not charge more than 80%, contact an Authorized ZTE Service Center.
How can I add a Google account to the device?
1. When you turn on the smartphone for the first time, you will be prompted to register a new Google account or use an existing one. But this is not a mandatory procedure.
2. To add an account at any time, you can register a new or use an existing account: Settings-\u003e Accounts and "add account".
How do I enable USB debugging? How do I get access to the Developers menu?
Enter "Settings-\u003e About phone-\u003e Click on" Build number "a few times. Then you will have access to the" For developers "submenu. In this submenu there is" USB debugging "and other functions for developers
How do I connect my phone to a PC?
Follow the steps below to install the driver (automatically).
1. Connect your phone to your computer.
2. When connected, select "Virtual Disk" or "Virtual CD" depending on the model.
3. An additional disk should be detected in the computer, run "Autorun.exe" on it and install the driver
4. If the drivers are not installed, go to "Settings-\u003e For Developers" and enable the "Disk driver". (10 times click on "Build version"
5. When you enable (USB debugging), the driver will also be automatically installed.
What do the letters E, G, H mean?
When the phone's data transfer is active, the following symbols appear on the status bar (indication of signal reception, battery capacity, etc.):
- E means active work of the EDGE protocol
- G means active work of the GPRS protocol
- H means the active work of the HSDPA protocol, which is part of WCDMA
This is the official instruction for ZTE Blade A210 in Russian, which is suitable for Android 6.0. In case you have updated your ZTE smartphone to a more "fresh" version or "rolled back" to an earlier version, then you should try other detailed operating instructions, which will be presented below. We also suggest that you familiarize yourself with the quick user guide in question - answer format.
ZTE official website?
You have come to the point, because all the information from the official website of ZTE is collected here, as well as a lot of other useful content.
Settings-\u003e About phone :: Android version (a few clicks on the item will launch "Easter egg") ["Out of the box" version of Android OS - 6.0].
We continue to configure the smartphone
How to update drivers for ZTE
You need to go to "Settings -\u003e About phone -\u003e Kernel version"
How to enable Russian keyboard layout
Go to the arzdel "Settings-\u003e Language and input-\u003e Select language"
How to connect 4g or switch to 2G, 3G
"Settings-\u003e More-\u003e Mobile network-\u003e Data transmission"
What to do if you turned on kid mode and forgot your password
Go to "Settings-\u003e Language and keyboard-\u003e section (keyboard and input methods) -\u003e put a tick in front of" google voice input "
.png)
Settings-\u003e Display :: Auto-rotate screen (uncheck)
How to set an alarm ringtone?
.png)
Settings-\u003e Display-\u003e Brightness-\u003e Right (increase); left (decrease); AUTO (automatic adjustment).
.jpg)
Settings-\u003e Battery-\u003e Power saving (check the box)
Enable display of battery charge status in percent
Settings-\u003e Battery-\u003e Battery Charge
How to transfer phone numbers from SIM-card to phone memory? Importing numbers from a SIM card
- Go to the "Contacts" application
- Click on the "Options" button -\u003e select "Import / Export"
- Select where you want to import contacts -\u003e "Import from SIM-card"
How do I add a contact to the blacklist or block a phone number?
How to set up the Internet if the Internet does not work (for example, MTS, Beeline, Tele2, Life)
- You can contact the operator
- Or read the instructions for
How to set a ringtone to a subscriber so that each number has its own melody
Go to the "Contacts" application -\u003e Select the desired contact -\u003e click on it -\u003e open the menu (3 vertical dots) -\u003e Set ringtone
How do I disable or enable the vibration feedback of the keys?
Go to Settings-\u003e Language & input -\u003e Android keyboard or Google keyboard -\u003e Vibration feedback (uncheck or uncheck)
How do I set a ringtone for an SMS message or change notification sounds?
Read the instructions for
How do I know which processor is on the Blade A210?
You need to look at the characteristics of the Blade A210 (above is the link). We know that in this modification of the device the chipset is MediaTek MT6735M.
.png)
Settings-\u003e For Developers-\u003e USB Debugging
If there is no "For Developers" item?
Follow the steps from the instructions
.png)
Settings-\u003e Data transfer-\u003e Mobile traffic.
Settings-\u003e More-\u003e Mobile network-\u003e 3G / 4G services (if the operator does not support, select only 2G)
How do I change or add the keyboard input language?
Settings-\u003e Language and input-\u003e Android keyboard-\u003e settings icon-\u003e Input languages \u200b\u200b(puts a checkmark in front of the necessary ones)
By the end of 2016, ZTE had a new budget employee Blade A210. The characteristics of the smartphone are good: an IPS matrix, a quad-core processor, one gigabyte of RAM, a 5-megapixel camera and a rather capacious 2200mAh battery. And now in more detail about him.
Packaging and appearance
It is clear that a budget phone will also have a budget package - only charging is included, or rather a power supply with a usb-microusb wire.
The appearance is simple - it is a black "brick". If you've seen one phone from the Blade series, then you know what the ZTE Blade A210 looks like. There are three touch-sensitive buttons (a circle and two dots) under the screen, and a speaker and a camera above the screen.
You will find the microphone at the bottom, and at the top there are connectors for connecting to a charger and a headset.
The hardware keys (lock button and volume rocker) are on the right.
At the back is the camera and speaker. A small protrusion is made next to the speaker, which is convenient because it prevents the speaker from blocking when the smartphone is on the table with its lid.
Screen
The screen of the A210 is made using IPS technology and seems small due to the large frame. The screen size is only 4.5 inches with a resolution of 854x480 pixels. I had an inexpensive phone with similar characteristics 7 (seven !!!) years ago. The screen "goes" into blue, while the viewing angles are quite large.
The sensor is triggered once, the sensitivity is low. Sometimes it is difficult to answer a call or open the top curtain of the menu.
Software part
The smartphone is running a fresh android version 6.0. The list of all attachments is made by tape, and not in several sheets, as with most other models. Because of this, it is unusual to use the device.
The smartphone has a "Turbo Download" function that allows you to download large files from the Internet using Wi-Fi and a mobile network.
SIM card settings are minimal - only the name and the default SIM used for the Internet, SMS and calls are set.
In the settings, you can change the assignment of the keys, or rather swap the places of the right and left. By default, there is a back button on the left and a list of recent apps on the right.
Hardware part
The "brain" is the Mediatek MT6735M processor with four cores, which rotate at a frequency of 1 GHz. There is also 1GB of RAM, 8GB of permanent memory and a Mali T720-MP2 video accelerator. Phones already had such parameters 5 years ago.
Almost 5 gigabytes are available to the user, of which 600 megabytes are occupied by pre-installed user applications. The RAM is even worse - 70MB is available in normal mode. That is, if you install additional applications, then it will end immediately. Due to the small available memory, you will not be able to play many games - they will run with a "slowdown".
In the AnTuTu 3D Bench test, the results are displayed as 0.8FPS, and the game requires at least 25FPS. In "good" games, one picture per second will be displayed.
AnTuTu Benchmark 6.2.6 scores 23107 points.
If you do not run video files with "complex" codecs or high resolution (2K or 4K), then there should be no problems with viewing.
Communication
There are no problems with communication, it catches the mobile network well. We do not have 4G in our city, but 3G is confident. There are no problems with the radio either - the stations play without interference.
The phone uses 2 SIM cards of the micro-SIM format.
According to information from many sites, the phone has GLONASS. It may be there, but it doesn't work. The location is found in about 1-2 minutes.
The characteristics indicate that there are sensors:
- Acceleration;
- Light sensor. It gives out clearly underestimated parameters, instead of 50-60 lux it shows only 20. Because of this, the illumination level is set incorrectly in the auto brightness mode.
- Orientation;
- Approximations. The proximity sensor in the verification program does not respond, and when you call, apparently, the front camera is responsible for the approach.
- Magnetic compass. Why is it in a budget phone?
Camera
The smartphone has two cameras: the front one is 2MP and the main one is 5MP. To use them, a standard camera application is installed with a minimum of settings. To be honest, both cameras are very bad.
The front 2MP camera does not have autofocus. The webcam works at 0.3MP. It's not hard to guess that the quality of the images is terrible.
The main camera has 5MP. And for some reason she also does not have autofocus. The quality of the pictures ... but the camera does not have "quality", the pictures are obtained with noise, blurred and with an oblique color rendition (pictures are obtained with a clear departure to blue). In general, the cameras here are just for show.
Autonomy
The ZTE Blade A210 has a 2200mAh battery. The MT6735M platform has low power consumption, which in the end should have a good effect on autonomy. But for some reason, in normal mode (calls and social networks via Wi-Fi), the phone was only enough for a working day. If you play, then the phone sits down in 4-5 hours.
The phone is charged in about 3 hours.
Outcome
In terms of characteristics, the smartphone does not stand out in anything, there is nothing to praise it for: no impressive design, no performance, not even a normal camera. It will be inconvenient to use it, so it is better to take another device for the same money.
To summarize: ZTE Blade A210 is clearly late with the release by several years.
pros
- Stable 2G / 3G connection;
- Stable Wi-Fi connection;
- Android 6;
disadvantages
- Low autonomy;
- Low screen brightness;
- Inappropriate sensor behavior;
- Low sensitivity of the sensor.