Golovna Whatever mobile phone
Or another device like a tablet, which would seem to have worked properly and literally “flyed” recently, can now please you with a work that has significantly fallen into disrepair, long-standing popularity of Internet sites, subscriptions and other non-acceptance with them. Initially, “lags” may appear due to severe galvanization and screen freezing for 5-15 seconds, which is not the norm. Resetting your phone can help
short lines
However, these “lags” cannot just go away.
When viewing Internet pages in a browser, the page scrolls jerkily, and not smoothly, as expected.
- After making a commanding gesture with your finger on the smartphone display, there is a freeze and the phone stops responding to the user’s actions, which makes it difficult to use the browser.
- Ways to resolve the problem of freezing and speeding up robot utilities on Android There are a number of ways to improve the productivity of Chrome on Android:;
- Click update Chrome;
- Clean device
Hard Reset
Search Google; Update Chrome. Enabling Chrome updates on Android 
To resolve the problem with Chrome hanging, try downgrading to the original version of Chrome (before the version that was installed on your smartphone when you purchased it). 
As a rule, vidality
chrome addon
It is not possible with the device, for which there is such a function as a drawer.
Cleaning (or Hard Reset) means outside skidannya all data saved on a smartphone (contacts, notifications, programs, videos and photos, music and other settings).
After the so-called Hard Reset, the device returns to factory settings so that it becomes the same as it was when purchased.
Before following this method, save all important data on another device.
Data removed after the cleansing procedure does not contribute to renewal.
- So, before cleaning, delete the cloud record from your smartphone, so that after dropping the device you don’t have to use this cloud record.
- To clean your smartphone for additional data removal, go to the menu of your device.
- Find and click on the “Adjustment” section, where one of the following points will appear:
Archiving and dropping;
Archiving and dropping; Confidentiality. Having reached the required point, delete the data by selecting the command you need from the window (“discard data”, “remove all”), after which it will begin to delete all data.
Your smartphone will automatically re-engage and be ready until the end of the day after you re-install the required add-ons and set everything up in a way that suits you best.
If your Android suddenly starts to lag again, and repeating the Hard Reset to long time ago It doesn’t help, which means the problem is with the installed add-ons on the device, which is very important, turning them on will significantly speed up the browser and phone. Search Google Another way to resolve problems with Chrome and speed up browser productivity is by simply using the service.
Search Google "і There is great confidence that after this method
Your device’s hang-ups can go away completely and won’t bother you anymore.
However, the memory trace is that after connecting the assigned service, voice search voice input
stop being accessible to vikoristanny. If you want to continue using Google's search system, you can and will continue to do so. Yak viknuti search Google 
Chrome update for Android
To increase productivity, improve browser performance, and stabilize your browser, try updating Google Chrome. Not in every case, updating your browser can help with the common problem of your smartphone freezing. As a rule, updated Google Chrome in spite of the guilt of the Swede
reliable robots
browser.
Some computers may encounter this situation if the Internet allows programs that require monitoring to function normally, and the browser does not open pages. In some situations, sites still open, but it’s even easier to display frozen images, not to mention the video. It also happens that the problem occurs in just one program, for example,
Internet Explorer
As long as everyone else is working normally.
To update the functionality of the browser, it is necessary to immediately determine the cause of the malfunction.
The main reasons why the browser does not want to expose the Internet to the Internet are:
Some browsers may not work due to problems with TCP IP or static routes.
Therefore, among the options, there are more problems and ways to solve them.
1. Checking the registry
- The first steps to take, depending on the power supply that works, if the browser does not work, is checking and, if necessary, editing the registry.
- For this you need to open the appropriate utility first.
- You can try this in the Windows folders, or simply click through the wiki command panel:
Press "Win" + "R";
Enter the command "regedit";
Press "Enter".
Apparently, What Appeared is a registry editor. The left part has expanded sections, in the middle of which there is HKEY_LOCAL_MACHINE. Now you should look at the right side of the window for a list of parameters and change the value to AppInit_DLLs.
Because this value is empty, everything is fine.
If you have specified the path to any file, this text will be completely erased.
The parameter values can be changed by clicking on something that appears.
right button
Mysha is not a context menu.
The file is located in a folder located at the address C:WindowsSystem32driversetc and does not have any extension.
After finishing, in the middle there is approximately the following text:
The last row next to the IP address is "127.0.0.1 localhost".
After all, there are other similar parts of the text that were submitted for all of them and entered there by some kind of unprofitable program.
Now you can restart your computer and try to access the limit.
3. DNS problem
One of the greatest simple ways Viryshennya nutrition.
All you need to do as a correspondent is just to open the command row and try to ping any specific site that is definitely responsible for the scam.
It is guaranteed that you will lose your precious date Google server What to ping by issuing the command ping google.com.
If the answer turned out to be something like this at the top of the image, you can see the website google.com.
didn't go away.
The problem lies with the DNS itself.
This can be corrected by replacing the Google server address with an IP address, which is made up of one thing.
As this helps, the Internet connection authorities need to set the DNS address to 8.8.8.8 or 8.8.4.4.
When this happens, the meaning will automatically change.
If the reason is not DNS, the Internet continues to function as before, but the pages are already opened.
4. Viruses
The reason that you cannot access websites from a browser, although it works normally, may be due to viruses or other nasty programs.
The stench only comes from programs like i and are often not detected by antiviruses.
Without being true viruses and infecting browsers and accessing the Internet through them, programs may not be detected by the system.
To detect such viruses, which we call malware (we want to use this word to mean some kind of bad program), there are special utilities - antimalware.
Most often, there are no costs involved in order to extort a license, or they can often steal a computer without payment.
Some viruses can block access to some extent, creating a situation where you can’t access a specific page, but the Internet cannot.
Check with popular sites, on your website, as well as all resources on which you can install an antivirus.
To protect your computer from these and other viruses, transfer a reliable protection to your computer.
Its yakost is best suited. What's more, the programs are paid, but at the end of the day important information
ne varto zaoschadzhuvati.
If there is no serious malware virus on your computer, you can install a free antivirus program.
5. Antivirus and firewall
Another explanation of the fact that the browser has ceased to allow access to all or even previous sites is the blocking of the Firewall, firewall or one of the anti-virus systems installed in the system.
To eliminate the ability to surf the Internet without any transition, you must change the settings of these programs so that they allow browsing pages. Important!
Since the problem occurs on many sites, it is not turned off, which is really dangerous for the system.
Setting up access through the firewall on your desktop should be done by the system administrator.
6. Static routes
The problem may also arise from the presence of fragmented entries in the routing table.
- Since there are a lot of them, one by one will be seen for a long time.
- You can quickly use the “route” command and use the “-f” switch, which is specially designed for such situations:
Click the command row (Window menu Win+R, enter cmd command);
The command "route -f" is launched before the window.
This clears the list of routes and is often one of the final ways to resolve problems with access to the Internet through the browser.
7. Resetting TCP IP parameters
It may happen that one of the options is not available, and the only option left is to reset the TCP IP system parameters.
To do this, click again and enter two commands: “netsh winsock reset” and “netsh int ip reset”.
Now you need to restart your computer and check the results of your access renewal tests.
Pouches
The remaining method is radical, but it also involves quickly cutting off access to the Internet (suitable for Windows 7 and above, since the XP version can install drivers manually).
Many people have encountered such a problem as the presence of the Internet on a computer, laptop or other devices. When the browser displays a notification: “Web site is unavailable” or a similar message. Partial culprits include: failure on the provider line, malfunction of home equipment (router,
merzheva map
etc.) or incorrect settings.
Everything can be described with two words – “there is no Internet.”
What should we do if we have connections but the web pages won’t open?
Problem analysis
- We first need to check to make sure that access to the Internet is active and working correctly.
- As a rule, other programs that vikorist measure, in such a situation work (available Skype, etc.).
- But there are such situations, if there are none, and it is not possible to install these programs.
- In this case, you can check the robot's boundaries using the additional command line.
To do this, press the next key Window + R and enter cmd in the window that appears.
The user must open a terminal and enter the ping command (you can also try entering the Yandex website address, for example, you will see ping www.yandex.ru). If the problem occurs, a command is given to display a notification on the screen about the impossibility of connecting to the resource. If you enter ping 8.8.8.8, you will receive a notification about the remote status. ping www.yandex.ru The causes of the problem, if the sites do not open, may be different.
Tse can buti:
Sometimes situations occur when the provider’s DNS server is not working or the settings in the router or computer have gone wrong.
The reason why the pages of sites cannot be opened has been explained, it is impossible to explain how to solve this problem. There are two options. If the adjustment measures have gone wrong, then it is necessary to correct them correctly and, if necessary, re-establish control. In case of DNS failure, you can change the settings on the adapter. For this click “Start” - “Control Panel” - “Meterings and Internet” - “Control Center for Settings and Backdoor Access” - “Change Settings” 
edge adapter " Here on the “Connected to” icon
local measures
» Right-click and select the “Power” parameter. Then you see the item TCP version 4 and in the window select the item “Victory current DNS addresses.” Below, enter 8.8.8.8 (public Google DNS server) or 77.88.8.8 (public DNS-Yandex).
After this, press the “Save” or “Save” button.
To check the robot, you can open the command line (Window + R – cmd), then you need to check the links (for example, with Yandex).
Enter the command ping www.ya.ru. 
At
doing the right thing
Below you can obtain information about the hour of the server connection.
Influx of viruses and harmful programs
Another reason why pages of Internet resources may not open is that the configuration of the host file may be incorrect. This situation is unlikely, but it’s still hard to believe. host file
Useful for recording site domain names and their IP addresses, otherwise leave them blank and send all records to the DNS server. Sometimes situations arise when a faulty program records certain parameters, and the browser becomes unproductive. To check the file configuration, you need to go to the system. 
Windows folder on drive C. Go to System32driversetc and open host with notepad. As a rule, it uses a standard replacement, as shown in the little one:
In any case, after describing localhost (127.0.0.1) the existing rows with information about any sites and theirs
domain names
If the slash does not stand opposite these data, then the browser does not work properly through them.
To correct this situation, you just need to delete the rows and save the changes to a file.
After this, you need to restart your computer and try browsing the web pages again. The situation when the computer is connected to a limit, but the sites are inaccessible to the user often occurs. At first glance, the problem is caused by failures on the ISP side, if the DNS servers are not working.
Another for frequency, if sites and Internet resources are unavailable, this means downloading cheap programs.
In this case, it is recommended that you take good anti-virus protection and carry out virus prevention more often. Problems with accessing web pages behind a different browser often arise and can make it difficult to contact an authorized customer service provider. Symptoms of malfunction Mentally, the problem can be divided into a number of possible options: Internet connection, stably run programs for storage at intervals,
In which the elimination of viruses with the help of special utilities that corrects the situation, the fragments of unnecessary changes that occur in normal work are saved (div.).
In addition, access to certain web resources can be blocked either by an anti-virus program or by a firewall installed in the OS.
To look at the situation, if computers located in the office of any organization do not access certain sites, then the reason may be blocking through a proxy server, and in some cases, a network administrator Development and specially developed programs for these purposes.
How timid
- At the first stage of diagnostics and search for the most serious problem, you should turn off the simple causes of the malfunction, and then:
- Internet connectivity;
- non-payment of fees for services provided by the provider;
- incorrect configuration of the router or operating system (div.); hardware conflict between edge building
and other possessions.
It is not clear here how such situations can be resolved, since all of them are due to the increasing ubiquity of Internet connections.
The problem, which can be explained in this article, is the impossibility of capturing even songs or web pages using one or more browsers in the absence of an active connection to the Internet.
In addition, the main problem should be resolved so that the devices are not infected with viruses.
- Change the registry so that sites cannot be opened This method helps eliminate the problem in 80% of seizures. For its implementation it is necessary:
- press the Win+R keys, insert the window that appears in the row
- regedit then press Enter;;
- When prompted, confirm the launch of the registry editor by pressing the “So” key; Open the program window and follow the route on the left side HKEY_LOCAL_MACHINE?SOFTWARE?Microsoft?Windows NT?CurrentVersion?Windows After this, parametric data, their types, will be displayed in the right section of the window set values
- , where it is necessary to know the row of them AppInit_DLLs and marvel at its meaning;
- If there is any significance in the presence, click on this
- context not menu then press “Change values”; At the window that has opened, clear the bottom row and press OK; let's go to again half a share
To finish, you will need to restart your computer.
Corrupted TSP/IP protocols
Another factor that provokes incorrect operation of the system is corruption of the TSP/IP protocols. To resolve this problem, reset the parameters edge protocols
transmission of data (div.).
- TSP/IP reset process:
- press Win+R; at vyknі vykonati netsh winsock reset and after whom;
- netsh int ip reset
- restart the operating system.
- Do not follow the HTTPS protocol or the certificate will be compromised
When you go to a secure site that uses the HTTPS protocol, which encourages data encryption, you may encounter a security certificate issue.
- A similar problem occurs in 3 types of situations:
- web resource is potentially unsafe;
- The date and hour on the device are set incorrectly;
security certificate, issued to a web resource, not entered into the browser database.
To resolve this problem, you first need to check that the hour and date settings on the device are correct.
Most often, this itself is the reason for the certificate being amended.
- If the date settings are incorrect, please follow the instructions below for your OS version.
- For Windows 10: press “Parameters date and time”; activate the parameter “Set hour automatically” and “
Automatic installation time zone." 8/8.1:
- For Windows versions on the third page, click on the icon on which it appears
- current hour
- that date;
- press “Zmina nalashtuvan date and hour”;
In the window that has opened, go to the “Internet hour” tab and click the “Change settings” button;
In the window that appears, click on the “Update now” button, and then click OK.
If you continue to view your web resource, you need to find the icon in the address bar of your browser that has a padlock on it, and click on it.
Apply information about the resource, its owner and other data.
Please check the information below as you know about the site.
Once you have confirmed that the resource is secure, click the “Review certificates” button, and then “Install certificates”.
After this, this page will become available. DNS freezing for non-critical sites As a rule, it is accompanied by the writing: “It is not possible to change the DNS address of the server,” which is displayed in the Internet browser window.
Manually entering the DNS server
Instructions:
- launch the Viconati service and enter ncpa.cpl;
- vibrate current method connect to the network and click on the context menu;
- activate “Vlastivosti”;
- find “Internet Protocol version 4 (TCP/IPv4)” and click on the mouse;
- At the end, which is turned off, enter the addresses of DNS servers for Google and Yandex - 8.8.4.4 and 77.88.8.8, and then click OK.
Checking the DNS client's work
Instructions:
- Start the Viconati service and activate the command services.msc;
- On the right side of the window, find the “DNS client” row and click on the new account;
- Navigate to the service to quit, otherwise press the exit button.
The site cannot be accessed due to hosts blocking
Hosts – a file that contains the base IP address and names of identification areas. This text file, which is saved in the depths of the OS, is actively attacked by virus programs, as well as system administrators
blocking access to song resources. In order to find the hosts file, you need to follow the route:.
This computer?Disk C?Windows?System32?Drivers?etc
You can open the file using the installed Notepad program. For OS Windows file
hosts may be in addition to the rows shown in the image below.
- Additional rows that are located in the file can be deleted and saved. copy text from stream hosts file
- , and then rename it (for example, hosts.old): create a new one text document
- Using the Notepad program, paste text from the clipboard; delete the entry rows and save them under the hosts name with your dad, where you are located old version
file.
The site cannot be opened on the phone
To resolve problems with your phone, you should first check your gadget for viruses. If the malfunction is saved after running anti-virus programs, then we ourselves forgive the decisions You will be sent a phone call to the factory. This method is suitable for any changes made
discounted programs into the operating system. If for some reason the settings cannot be reset, you need to check the hosts file (in Android OS you will need help file manager).
take the route
system?etc?hosts
| Pardons 403,105,101, 500, 502 | To complete the picture, it will be necessary to expand the picture, which means the expansion of the symbols that are displayed in the browser window. | Pardon code |
| 403 | Cause mercy | |
| 105 | Problems with the DNS server or the service that communicates with it. | Watch the section “DNS Fixing” for more information. |
| 101 | Through the use of an antivirus, setting up a proxy server or border screen The browser cannot switch to a different protocol during the hour of connection to the web resource. | Then check the robot protocol settings in your browser. Check the hosts file before changing it. |
| 500 | Incorrect syntax of the .htaccess file or the use of special commands that are not supported. | Sometimes the deal is related to improper use of CGI scripts. |
| 502 | Pardon on the side of the Vlasnik site koristuvach we can’t get on it. | Problems related to the work of the proxy server, DNS server or hosting server. |
Specify cookies for this site. If it didn't help, it's a server problem. I often ask readers why they don’t use a browser on a computer.
This is actually a very serious problem, since a computer without the Internet in 95% of cases is a waste product that takes up space on the table.
In order to easily get out of the way, let’s figure out what’s the point here. This problem applies to all browsers: Internet Explorer, Mozilla Firefox
, Opera or Google Chrome.
Before this happens, we need to take into account that the food itself has been delivered a little incorrectly. It is your responsibility to clearly identify the problem so that it can be addressed.For example, do not run browsers on your computer or just one browser. If you look at the “fall” in all browsers, then there is usually a problem in any program that does not allow them to engage normally. The most popular problem is viruses, which themselves cause problems with the system and require you not to turn off important information. Viruses can block not only browsers, but also other software products, in any way, indirectly, allowing you to access the Internet or simply For example, do not run browsers on your computer or just one browser. text editor
We can see absolutely all the rows that are not there.
So that you can understand how the file can be viewed, I will show you a screenshot of mine.
Let's save and renew your computer! If the system does not allow you to save changes, you will need to open Notepad as administrator. To do this, go to “Start” - “Accessories” - and then right-click on Notepad.
From the menu that appears, select “Run as administrator.”
Then follow the instructions described above. If you have little information about these people on the right, then hurry up special program
to update the hosts file.
"".
- Viruses are a constant problem
- To check your computer for viruses, it is best to use a special utility with up-to-date databases that is already on your computer antivirus installations, I still ask you to download and check your computer with one of the utilities: or .
- First of all, how can I download the program or go to any site if my browser is not working?
There are a number of options to choose from in this situation: Speed up with a laptop or any other computer that you have access to (work, with friends, etc.), you can also speed up with a tablet or smartphone that has Wi-Fi. The worst situation is that there is only one computer, and there are no common browsers.
There can be only one way out here - you have the Download Master program installed, which allows you to download files from the Internet without using different browsers. Or it can be taken from another computer. You need to go to Top Downloads and find Dr. there. Web Cureit Start menu command regedit.
We pass the path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Windows\ and we know the right-hand parameter AppInit_DLLs.
First you need to open this parameter and enter the value 0, then press “OK”.
Now press the right mouse button on the new one and select “View.”
After this, restart your computer. The problem may persist. However, reinstalling the operating system will help - this option for many will be a way out of the situation, but without forgetting about those that are a problem, then there may be a solution.
Reinstallation If there is a problem with any program, then I would like you to try and update it through the “Service” or “Help” menu. If the update is interrupted, then go to the official website and download