Active koristuvachs may need to plug in a computer in about an hour. This may be due to the downloaded or installed programs, the need to log out of the PC for various reasons, and other factors that necessitate the need to turn on the system after a certain period of time. This material of clicks will help such traders, from whom I will learn in detail how to organize a computer shutdown timer on Windows 10, as well as ways to implement the assigned task.
How to set a computer timer in Windows 10
Let's take a closer look at the various tools that allow you to quickly set the required timer to freeze our OS.
Method No. 1. Vikorist's functionality of the shutdown command
The “shutdown” command has been introduced into the Windows 10 functionality and is used for this operation from logging in and restarting the computer, putting the PC into hibernation mode, deep sleep, and also for ending the streaming session of the computer. In our specific analysis, the format of this command looks like this:
shutdown –s –t (hour in seconds)
- switch -s — indicates computer malfunction;
- key -t - indicates an hour of warm-up before using the computer;
“Hour in seconds” (replacement of each number) is an hour in seconds, after the PC is connected (obviously, 600 seconds = 10 hours).
For example, the command:
shutdown –s –t 600
Login to your PC 10 minutes after activation.
To quickly use this command, press the keys Win+R, near the Viconati row. Type this command with the keys (previously displayed in seconds for the length of time you need) and click on the entry.
Another way Entering this command is a substitute for the command line functionality.
Launch the command line as administrator and enter:
shutdown –s –t 1200 (in this case, shut down after 20 minutes, instead of 1200 enter the number you need) and press “Enter”.
Third method To implement this command, the “Power Shell” shell is used. Why press the key combination Win+X, select "Windows PowerShell (Administrator)", and wait until the shell window opens. After that, enter the command I have learned and press the entry.
Vikorist the Power Shell to type the given command If for some reason you change your mind about turning off your system, then press again Win+R, and in the vicont row type:
shutdown
The planned computer connection will be affected.
Method No. 2. Vikoristuyemo Planuvalnik Zavdan for setting a timer
“Windows Scheduler” is a handy system tool that allows you to launch the program you need at the right time with the right minds. We are using this functionality to launch the already known shutdown command when we select the hour.
To quickly use the planner's abilities in a row, enter:
taskschd.msc
then press Enter. The planner window will open, in which you right-handedly click on “Create a simple task.”
Select “Create simple ideas” 
Set the hour to shutdown the PC, then press “Next” Here we type a series of programs and scripts shutdown, and in the "add arguments" window enter -s, after which we are embossed with Dali.
The planner is scheduled to start at the hour indicated by us, and open our PC with Windows 10.
Method No. 3. Creating a bat file
Another simple and easy alternative to setting the PC shutdown timer is to write a text bat file. Here you enter the text of the connection procedure, then place the file on your desktop. By clicking on it, you indicate the hour through which your PC will be connected, after which the secondary timer starts.
To create such a bat file, launch Notepad and enter this text:
Click the “Save” button, select all files under “File type”, give it a name with the extended bat extension (for example, “ File name.bat"), then save the file on the desktop of your PC. After pressing on the new one, it will be enough to enter the required hour, and your PC’s problem will be activated.
Method No. 3. External programs for PC use
There are a large number of external timer programs that allow you to turn off your computer at a convenient time. New variety of available statistics: . Let's take a look at some of them:
"Power Off" utility
The “Power Off” program is a PC software that allows you to not only turn off your system, but also reboot it, put it into sleep or wake up mode, end the current session of the user, and exit other routine operations.
Please install and run the program, in the “Timers” tab, select the specifics of the operation and time of request.
Program "Wimknenya Timer"
The “Warm Timer” program is compact and handy and is designed to run your computer whenever you need it. You simply set the required hour to turn off the PC (or after some hour you need to turn it off), and the program will create everything else itself.
Add-on “Free Desktop Timer”
The Free Desktop Timer program comes in the form of a widget that displays the hour on the desktop of your PC. If you need to shut down your computer after an hour, simply hover over the widget, right-click, and select “Shut down the computer.” You will lose the time to set up the hour after pressing “Start” with your right hand.
Customize the Free Desktop Timer program "Final Countdown"
The English-language program “Final Countdown” has the same simple and user-friendly interface for running Windows 10. All you have to do is select the required operation (move, re-engage, go to sleep mode, deep sleep, end session, block), set the time for it, and create all other programs yourself.
Visnovok
There are a variety of ways to easily and manually set the computer's shutdown timer. You can quickly use the solutions installed in the Windows 10 OS itself, or install external software on your computer that allows you to easily turn on your PC when you need it. However, I don’t have any particular desire to expand on the capabilities of existing stationary programs; the remaining functionality of the shutdown command is completely sufficient for completing all types of tasks.
There are problems when you need to type the term, but the movie has not yet been downloaded, the files have not been copied, or you simply need to turn off the PC before going to bed without getting up from bed. In this situation, the ideal solution to the problem is to auto-connect the device. There are many ways to configure it in Windows 10.
Method No. 1. Through the Viconati row
You can automatically connect your computer to Windows 10 through the Viconati row like this:
- Type Win+R and enter shutdown-s-f-t600, where 600 is the hour in seconds.
- After 10 minutes (or how long you specify), the computer will turn on.
Method No. 2. For additional help from the team row
- Press the right button on the “Start” icon and select “Command Row”.
- The console will open. Enter the command “shutdown-s-f-t2400”, where 2400 is the hour it takes to turn on the PC in seconds.
Method No. 3. Via Planuvalnik zavdan
- Press the right mouse button on the “Start” menu and select “Computer Settings”.
- A new window will open. Select “Planner for the future”. Embossed “Create a Zavdannya”.
- A new window will open. Let's go to the "Triggers" tab. The pressure is on to “Create.”
- The date, hour and frequency of delivery are set.
- Next, go to the “Action” tab and stamp “Create”.
- In the “Program…script” field, enter “C:WindowsSystem32shutdown.exe”.
- In the “Add argument” field, enter “s” (so that all programs complete their work correctly).
- Go to the “Mind” tab and check the icon “Start the program when the PC is idle.” What do you want the computer to do without any restrictions? It's time to get connected via any PC.
- In the “Settings” tab, set the icon “If Windows fails, restart the PC through...”. We save the result.
Your Windows 10 computer will automatically shut down after the end of the hour.
Do you like to get angry with your computer? Never mind, there is more than one way to connect your PC. We would like to present to you 7 ways to turn on your computer on Windows 10. All methods are verified and valid. The material of the splits ranges from simple to folding.
1. Complete the work for additional Start menu
To do this, press start on the command panel at the bottom left corner of the screen.
Then click on vimknennya .
There are only 2 options available, click to restart your computer, vimknennya, so that I can get it in.
If you are using Windows 10 on a tablet, the command panel may be slightly different, but the algorithm is practically the same by clicking the menu Start .
2. Open Windows 10 for additional WinX menu
Starting with Win8, you can quickly install WinX to open Windows 10 by pressing the Win + X keys on your keyboard.
A list of system functions will appear, at the very bottom you can point the bear at Completing work or logging out of the system to select additional options.
You can also access this menu by right-clicking on Start Or, if you are using the touch screen, point your finger until the WinX menu appears.
3. Open Windows 10 using ALT+F4 keys
Please note, do not press ALT + F4 while working with a program or program, this key combination will close the program. Be respectful and vikorist only if you are on work table . After pressing, the Windows menu will appear.
Here you can open the list of what appears, where you can select “ vimknuti or else completion of work » Or restart Windows 10. You can also log out of the customer profile or switch to another profile. Select the required option and press the button OK, so that you can select your choice.
4. Go to Windows 10 in the Command Row and Shutdown parameter
If you like to work in the command line interface, you can open the device for an additional parameter. Enter and press Enter. The completion of the work will be due for the quill, jump out of the window in advance.
You can also quickly use this command for the additional command “Viconati”, then enter and press Enter, to plug in the device on the Windows platform.
To restart Windows, replace completed /s on /r. To select all available options, you need to enter shutdown in command row .
Wimnut Windows 10 from the lock screen
If your device or PC is in locked mode, you can turn on Windows by first clicking on the options in the lower right corner, after which the options will open from the context menu.
6. Use Windows 10 to use the "Slidetoshutdown" command
Press the Win+R key combination to launch the command “ Viconati" From the command line, copy and paste Slidetoshutdown.exe, then press Enter or OK .
This file is saved in the Windows system files, and you can place it behind a shortcut on your desktop and turn on your computer directly from it.
7. Click on Windows 10 for the additional live button on the device
If you use Windows 10 on a touch device, smartphone or tablet, there is another way to enable it. First of all, you need to press the button to turn on and turn on the life of your device, after which the screensaver will appear exactly as we did in the previous step, with the command Slidetoshutdown.exe.
Now you just need to move the slider down to turn on Windows 10.
Visnovok
If you want to turn off or reactivate a device, Windows 10 offers a wide range of options. The remains are a simple solution, there are no everyday needs to put things together.
Vinikli problems vimknennya or rezavantazhenya computer? Write in the comments before this article, perhaps we will give you a solution.
Automatically checking your computer is a very useful option that will help you out more than once. You will be in good hands in quiet situations, if your PC or laptop is busy with a trivial process, and you need to go. This way you can adjust the computer's settings - if the operation is required, you will be able to install it on your own. And you can calmly go to sleep, go to work or do other things.
Most often, adjustments are needed if you:
- check your PC for viruses;
- convert video files;
- install the computer program;
- enchant large files;
- copy important data too.
There are a lot of options here, but the essence may be reasonable.
The first one is for help in using the new Windows features. The other is Vikory and additional software. Read about the other method here: . And this article describes all the possible ways to configure your computer to freeze during tasks using Windows.
All of the following methods are universal and work on Windows 7, 8 and 10. It doesn’t matter what operating system you have, you can schedule your computer’s operation manually.
Setting up an automatic computer connection
The first method that can be used to automatically turn off a computer or laptop is to use the “Viconati” section. For whom:
It will appear at the end, which confirms that everything has been assembled correctly.
The number 3600 is a number of seconds. You may as well be. This command itself automatically activates the PC after 1 year. The procedure is one-time. If you need to sign in again, you need to sign out again.
Instead of the number 3600, you can write it differently:
- 600 - vimknennya in 10 hvilins;
- 1800 – after 30 minutes;
- 5400 – for repeat years.
I think the principle is reasonable, and you can figure out what’s needed yourself.
If you have already activated the computer's self-shutdown and for some reason changed your mind, select the option again and enter the shutdown -a line. As a result, the planned payment will be automatically canceled. If everything is divided correctly, then you will be informed.
Access your computer via the command line
Another very similar method is through the command row. To activate this option:
If you immediately change your mind about canceling this operation, open the window again and enter - shutdown -a.
This command only works if you have already set the hour for the computer to shut down, but it has not yet arrived.
Before speaking, since this procedure needs to be repeated regularly, this is the simplest way. To avoid opening the “Viconati” window or the command row, create a shortcut (for example, on the desktop). І in the field “Rotating the object” write the offensive row C:\Windows\System32\shutdown.exe -s -t 5400(the number may be whatever it is). Click "Next", then enter the name of the shortcut and click "Done".
Now, if you need to turn on your computer, just click on this shortcut. This option is activated immediately (you will need to confirm the notification).
To make things easier, you can create another shortcut to remove the computer from your computer (you will need it first). Ale here you already need to write something like this: C:\Windows\System32\shutdown.exe -a(without a speck, for the record).
Wimc of the computer at the desk
The last method is to connect the computer one hour at a time through the “Planner”. Approach in these cases, when this procedure needs to be completed regularly: cleaning, plucking, etc. To avoid running the command line continuously, it is enough to set the computer or laptop's wake-up time once.
To do this:
- Go to Start – Control Panel – Administration.
- Select "Planner".
- In the right column, click “Create a simple task.”
- Enter a suitable name – for example, “Automatic PC shutdown”.
- Indicate how often you need to complete this procedure (if only once, or better yet, choose one of the methods for automatically shutting down your computer, described above).
- Set up your computer or laptop (enter the hour and date).
- Select the first item - “Run the program”.
- In the “Program” field, write shutdown, and in the “Arguments” field -s -f (the -f key closes programs in Primus order - just in case it freezes).
- Click the “Done” button.
This way you can set the hour the computer is turned off. This is approximately how a simple or costly setup works. Some fields will be different, but there is nothing complicated there - you’ll figure it out.
What to do, what needs to be done and cleared up? Then go back to the “Planner” and open the “Library” tab. Find the task here in the list (behind the name) and click the left button.
In the window, go to the “Triggers” section and click on the “Change” button.
If you no longer need to be on your PC for the folder, you can go to the “Library”, see your workbook, right-click, and then click “View.”
Sprinkle of words to finish
Many daily programs have a checkbox “Turn off the PC after completing the procedure.” Most often, these utilities are used to finish their work for a long time - for example, disk defragmentation, scanning a laptop or computer for viruses, etc.
Be sure to check with the skin program whether this checkmark is present. If so, then you won’t need to adjust your PC’s behavior every hour. So much simpler and simpler. If there is no such thing, then you will have to configure the settings manually.
How to properly recover the hour if you need to remove your PC? Call the program to show approximately the value when a specific procedure (virus scan or defragmentation) is completed. Marvel at the new one and add another 20-30% (or more) to the beast. In any case, your PC will crash earlier, until you tell a lie or come home from work in the evening.
Many people have had situations when they had to check until a program on the computer completed its work. For example: converting video, watching a movie, acquiring files, etc. In fact, it’s not very difficult to check – you can adjust the computer’s connection to the timer. Today, with the development of various programs and the operating system itself, there are many ways to adjust the auto-shutdown of your PC, including the introduction of Windows.
In order to set up your computer's auto-connection in an hour at an additional console, you need to enter the following steps:
- Open the console. For example, use the additional keys Win + X. Then select the vision item.
If you have a different version of Windows 10 installed, then there Windows PowerShell will be written.
- Dial the attack command.
- Press the Enter key.
- A new notification will appear at the bottom right corner of the screen.
Team Shutdown There are a large number of parameters that allow you to set the necessary entries when your computer is connected or restarted. For example, the number 7200 means after an hour the device needs to be turned on. It disappears in seconds. 1 year is equal to 3600 seconds.
Chi can be used to complete the robot
It's easy to plan your computer or laptop. However, sometimes attacks are made if it is necessary to kill this team. For example, if you initially decided to set the hour to 2:00, and then changed your mind and wanted to set a different hour.
When re-entered shutdownexe /s/f/t 7200(or at some other time) to appear in such a manner.
To assemble the layout, enter the command.
Please note that after skin injection you need to press the Enter key. I'll let you know immediately after this.
Now you can re-enter your connection at any time.
The trace indicates what time the command was entered shutdown The console needs to be expanded first . exe.
To become familiar with the additional parameters for logging out of the system, it is enough to enter the following operator:
shutdown/?Shortcut on desktop
If you need to constantly unmute your computer every few hours, it is recommended to automate this process as much as possible. You can start the sleep timer via a shortcut. It's easy to create a yoga. It is enough to write the following terms:
- Click the right mouse button on your desktop. Select items from the context menu "Create a shortcut."
- A label will be created on the work table. You will be asked to specify additional parameters.
- In the following column, the next row is indicated.
- Let's go to the next step for the additional button "Dali."
- At the box that appears, you will be asked to enter the name of the shortcut. The name of the team is followed by the promotional team. For beauty, you can enter whatever I call you.
- Save settings on button presses "Ready".
Descriptions of the code can be used in other places. For example, in the Viconati utility. To launch it, press the Win + R keys at once.
Initially, the entry field is empty. If you have used this program before, then the old team will be saved there. Write a higher code here for guidance, but without adding anything else.
shutdown.exe /s /f /t 7200After this, press the Enter key or the button « OK".
As a result, a notification will appear in the lower right corner of the screen.
If there is no such information, it means you have done it wrong.
Vіkladene vymknennya u planulnik Windows
You can adjust the timer using a special system scheduler. Why sign such actions?
- Launch the "Viconati" utility in the following manner.
- Enter command msc and press the button « OK» .
- In the window you need to select the item “Create a simple task...”.
- Next, enter your name and click on the button “ Dali".
- After you press the button “ Dali", move to the final stage
Click on Ready. Now every day your computer is disabled exactly on the 11th anniversary of the evening.
Thankfully, you can plug in your laptop just like that.
Automatic connection of the computer to additional third-party programs
How can I set a timer on my computer on Windows 10 using other programs? On the Internet you can set up your computer's shutdown timer. There are a lot of such programs. For example:
- Wise Auto Shutdown;
- Airytec Switch Off;
- Vimknenya timer;
- PowerOff;
- Auto Power OFF;
- SM Timer;
- and many others.
You can be captivated without catastrophe by the Russian one with them. The timer program works on exactly the same principle as the Windows system scheduler.
Visnovok
As you can see, there are a lot of methods by which you can reconnect or reconnect your desktop computer or laptop. Choose the option that suits you best. If you only need to plug in the device once, you will need to use the planner or gadgets. It is much easier to enter the command into the console rather than install the entire program.
Video instructions
If you still don’t understand how to set a timer, it is recommended to watch the video, which shows everything step by step with additional comments.