To do this, set up the "Business Accounting 3.0" configuration and enable the "Taxi" interface in business mode:
Krok 1. Open parameters in 1C mode: Entrepreneurship
Croc 2 Switch the interface to the "Taxi" mode
Croc 3 After restarting, the interface changes to the default one. Ale, however, it is not easy to practice, because You can’t see the window open and you can’t normally move from one window to another, which, insanely, is a big minus for customers.
Krok 4. The inconvenience of changing open windows can be corrected. Let's go to the menu "View > Panel settings":
Krok 5. Arrange the panels as you see fit. I do it manually like this:
If you move them up the mountain, the results will be much the same as with the old interface.
Krok 6 The axis is what can be determined as a result. Open the window below. It's even better! Anyway, let’s try to paint the interface and move on.
Krok 7. The scale of the image can be changed. Marvel at the way it looks open document From a larger scale, which is installed behind the mind:
As for me, it’s too big and insignificant for working in the same old interface.
If you want, of course, you can deprive it this way, as it is for those for whom it would be normal.
In order to change the scale, go to the instructions and download the editing:
After entering this in the menu “File > Open...” you can open it in business mode. Then click the “Set compact forms mode” button and restart the configuration.
The axis that can be deduced as a result:
Check the remaining screenshot from the previous ones and make your choice.
Everything came together beautifully, manually, neatly and compactly.
Like me, it’s much easier to practise.
Welcome, colleagues!
What is the taxi interface in 1s
Speaking about the “Taxi” interface, I would like to look at two main points that are often not understood by customers: “why did they need a new interface and why did they need to create one?”
In this case, we would like to point out that, of course, the developers do not differentiate between the application solutions and the platform. For them it is all one thing. In truth, it’s not entirely like that. If we decided to make changes before this “whole”, then, as a rule, changes need to be made not only in the configuration, but also to change the platform.
The same situation exists with the Taxi interface. What kind of global development was conceived by the distributors, what was the goal of this improvement?
The main reason lies in the fact that from the moment the web interface appeared and “1C: Enterprises” entered the Internet (including access through 1cfresh), and with the development of the Internet itself, the audience of the developer began to expand rapidly.
The first applied solutions were directed only at these core workers, who were developed and prepared to work with them. The stench passed ahead of the training and mastered the subject area. Of course, not everyone has high rhubarb preparations, otherwise the stink could grow even further to the top IT service.
Nowadays, the situation has significantly changed among business owners, as they become more experienced in working with the Internet, as well as mobile devices and programs that do not have economic specificity. It is more important for current hobbyists to learn new things “from the screen”, where ease of use and ease of use are important to them. Now, until the start of working with the program, almost no one will finish the course or read books and documentation. The mastered program is learned directly in the process of working with it, during which you understand how it works and what you need to do in it.
In addition, in great companies, specialized software solutions are starting to be sold not only by those who are actively using the computer, but also by those who have not previously required work with it, for example, a master who previously Tsyuvav on the virobnitsti. Thus, the job of retail workers is reduced to such a level that the “entry threshold” is as low as possible for cashiers, and there is no need for them to get started in principle with robotic programs. Moreover, such easy-to-learn software solutions are beneficial for small companies, as well as for large-scale installations, as they do not require wasting time and money on starting a new laptop. However, it is important not to forget about active developers, for whom the effectiveness of the work is important, and not the simplicity of the process.
Such minds already have a lot of configuration left in them. It is necessary to do this manually for an unprepared operator and thereby ensure productivity. In practice, problems during operation can also be caused by the platform itself and the interface, which simply cannot be achieved with a “good” configuration.
What's included in the new interface?
During the course of numerical testing and monitoring the work of the operators with typical applied solutions, the engineers were able to identify the main problems that they tried to solve in the new “Taxi” interface. Why did they have problems? Below is a list of situations that caused difficulties for business owners while working with programs:
- It is important to know the required object: a menu item, a command on a panel, a row in a list. The more tools are displayed in the list or panel, the more time it takes to search. In some cases, the required items could not be found, although the stench was present. In this manner, the koristuvach is obliged to use other methods of searching, as soon as they were available.
- It is important to know the necessary data: the invoice of a specific purchaser and the date of the transaction. The system is working unsatisfactorily, history is working badly. Before “Vibrany”, koristuvachs rarely go wild.
- Problem with selection in the input field. Koristuvach rarely fight when a joke is introduced, and when working with a form, respect is required and the situation often arises when the koristuvach loses the context of the work. When adding a new data element from the form, the context of the work is almost always lost.
- Problems with the form of choice. Most often, the correspondent searches clearly, and not through a series of searches, which causes the problem described in paragraph 1. Rich people have difficulties with hierarchical lists, especially newcomers who are still familiar with the the established hierarchy of data in the form.
- The interface elements are even different. Sometimes it is important to recognize them and target them. As a rule, there are buttons without text that look like pictures, as well as navigation buttons in the calendar.
As a result of the decision, in which all the descriptions of the main problem were included, the new “Taxi” interface was released, exceptional specialness what and not so thoroughly external look, how many:
- Improved navigation capabilities in the app
- Possibility of customizing the work environment
- Enhanced Possibilities Vikoristanya several elements interface
Navigation for additional information
Well, one of the main goals in the development of “Taxi” was to improve the navigation for the app. In this case, the secret lies in the fact that:
- The commands and tributes of the commands were expanded as close as possible to the koristuvach
- You can easily find the required data in a timely manner
In order to implement this task, you need to change your approach before navigating the page in a number of directions. What happened as a result?
The role was promoted "stories" as a tool for searching for data. For which, instead of the history of changes, the history of the letters appeared, the number of elements that are saved in the history, and the reworking of the dialogue and images, has also increased - records under They follow the dates, and the search becomes more direct:
A dynamic history panel is also included - it can be placed mainly in windows, so access to recent entries is always denied “at hand”. In addition, you can select the history panel to switch between in closed forms.
The role of “Selected” has been expanded - now it is a tool for accessing the main functions and data:
It became possible to add not only data, but also commands to the selected
Added elements from the selected system can be removed from the function, form, history dialog menu - in one click
The dialogue between the selected ones also recognized the processing and has now been implemented new search
The ability to change the names of selected elements has been implemented
The vibrated panel has been created. Now all elements can be “fixed”, and the selected panel can be used as a panel for basic commands
New possibilities have emerged for more frequent search of full-text search data. For this purpose, a standard form has been created for full-text search in all applied solutions.
The mechanism itself has been improved for faster and more successful results.
Implemented automatic robot regulatory orders File mode works without the need to start an adjacent service connection. Thus, in the file mode, the relevance of the full-text index is maintained as simply as in the client-server mode.
In addition: The toolbar has been expanded to allow you to navigate to the main methods of navigating the program: selection, search for data, function menu, history
The function menu has also received a new design, allowing for a greater number of commands to be processed
The connection between the cob side and the “main” section is now independent. The new interface has two related and unrelated objects.
The sections are assigned the role of a “logical group of commands.” As a result, the partition ceased to serve as a working place, but became a way to deny access to the command menu, which is a common application space
More fragmented quick access to home page
An alternative navigation has appeared in the Forward/Backward paradigm for hidden forms
Koristuvach's working space
During the course of monitoring the work of koristuvachs, it was revealed that their skin is subject to different tasks and the skin needs a different monitor size. Since it is unrealistic to make such a solution that could meet the needs of all workers, the researchers believed that this situation could be changed better for the sake of the possibility of “designing” the work place.
For example, we have a small monitor and a small screen space. In such a situation, the panel near the window takes up a lot of space within the entire work area. The connection with this was likely to increase working area The way to enable all panels except the toolbar.
Navigation capabilities are no longer available in the toolbar. Actions from elements will become “distant” through the application clicks when working with a mouse, or even a fraction, in line with what capabilities are now available to the user for the manual operation of his robot.
Or let's point to a different butt. We, by the way, have a wide-format monitor. Here, obviously, we don’t care about saving space. In this case, it is possible to organize the workspace in a way that is most comfortable for the operator: you can display all panels at once - sections, history, etc. If you need to frequently switch between closed forms while working, you can select the open form panel for ease of use. For small configurations, use the command bar in-line division maybe more hard decisions, bottom of the function menu.
The panels can be keruvati yak koristuvach, and the rozrobnik himself. Out of specificity applied solutions, they can be tasked with the removal and storage of panels for washing. For example, the flow partition command panel is not available for small configurations.
Before installation, you can clarify the configuration of the panels for the singing koristuvach. These adjustments can be set independently by the teacher himself.
Wikoristannya fields
The usability of the input fields when selecting a value has been improved. Previously there were problems like:
- Irrational placement of the button for selecting instructions from the input field. Richly koristuvachiv, bachachi qiu button, pressed її without starting to enter the field. As practice has shown, the most effective way is to choose an additional form of choice.
- Not all users realized that in some fields it is possible to make an entry for selection.
- The field is divided into two buttons - a button to select and a button to select from the list that appears. This often confused the koristuvach, because it was unconscious, with which button to quickly turn
Due to the over-insurance “inconsistencies”, retailers changed the behavior of the entry field. Now the value selection is completed through the drop-down list, which contains the history of the selection, the value selection and the selection list (similar to the power of the form element).
To see the list, what is dropped is transferred new button, also appears when the mouse is inserted into the input and selection field.
The list that appears allows you to understand that the field is intended for selecting a value, and not just for entering text. In addition, even at the first click it becomes clear that you can also enter text for searching in the field. For the sake of historical clarity, the values that were most recently entered are saved. If necessary, you can add a new element without changing the selection form. You can also choose to use the form of selection, as you don’t need anything else. It is also important that the list that drops down does not open behind the keyboard, so as not to interfere with the entry of data.
Previously, there were also problems with the selection of values - either the search did not give the desired results, or the value was too rich. Now, when you select the values, they are displayed immediately. It’s also worth adding that information about the result of the selected values, which were previously displayed in the dialog box view or when trying out of the field, are now displayed in the list when entering.
The select button is now located in the list of items that appear. Of course, for usability reasons, the process of opening the selection form has been delayed, and the number of “clicks” is required on the field to select the list that appears, and to press hyper-power in the list itself. Ale given the decision was implemented in a way so that students can quickly search for a set and at the same time use the form of choice.
- The history saves the remaining selected values
- The search can be made not only on the beginning of the row but also on the row, but also by entering the full text
- The entry of a new value can be deleted without opening the form to the list
It is important that the selection button can be turned to the right place. Also, the drop-down list has the ability to select formatted rows as a means of indicating the value of the selection and selection list. This allows you to visually see the rows behind each color of text and font.
New design
After the clear changes that have occurred in the classroom, you can make changes to the interface design. From this drive, developers had a variety of ideas, ranging from simple to complex concepts. The main foldability of the interface is due to with a Swedish twist Internet. As we have already been told before by the Koristuvachs computer technology There were only those who were needed for the execution of business tasks, the connection with which the interfaces were essential for them - their tasks were built to ensure the possibility of completing these and other functions tsіy. The aesthetic side and handiness of the vikoristan were not the main aspects at that time. The main thing is to ensure that the interface supports the necessary set of functional capabilities without causing any obvious objection - just being “normal”.
The active development of the Internet and mobile devices has impacted the koristualny audience and now most of them are active korustuvach, which computer technologies are needed for the development of completely different tasks - blogs, conferences, social measures ta in. Such additions combine a number of hidden factors - the ability of work in one program for a large number of candidates is independent of the level of their training, and competitive resources, so that clients of today's ideas a wide choice of social networks, search portals, etc. Among them, the choice is based on the benefit of these resources, which is not only functional abilities, as well as usability and modern design.
Thus, for everyday programs, what is important is not so much functionality (for all of them it is approximately the same), but rather aesthetic convenience, and then user-friendliness of the interface. This trend has led to the emergence of a whole new concept in interface design. further development These ideas are based on sophistication, graphics, simplicity and usability. The result was the appearance computer devices, which are available to users and adapted to new interfaces, which are respected by both manual and reasonable people.
Another complexity in the development of the interface was due to the fact that it is not typical for Internet users to vikorize just one resource, they can vikorist a few similar ones that suit them best - browser, email, and again and social media and etc. Otherwise it seems, in this situation it is important that the program is not just good, but “receptive”. Now, the phrase “snap on the waist” has become more relevant for software solutions. Whatever the koristuvach’s acquaintance with the program has not ended, it is important that she attracts attention with her appearance.
Other developments in the “Taxi” interface were aimed at eliminating other “shortcomings” - the complexity of the “look at the eyes” of the required elements of the program, the inhumanity of the robot with the target, the complexity of the “hit” » in action elements and in. As a result, it was possible to create a design that had new steamed rice, and itself - larger sizes of elements and larger font. There was also more space between elements, which allowed the interface to be more fluid. Color gama also recognized the change - now the form and fields are drawn alone white background, the active field is highlighted, group headings are displayed by color, you can also see the entire group by color, etc. The dimensions of the form elements were also changed, and new elements were added, for example, “Tumbler”.
We would like to point out that when creating a new interface, we take into account the fact that a robot with an add-on can be connected to a device with a touch screen, which is even relevant today. Therefore, all decisions in the interface were viewed in the same way as they are used and displayed on touch devices - tablets and others.
What's missing?
U present moment Developers will have to rush to make the transition to new version platforms are the simplest. However, not everything can be done automatically; in fact, it is still necessary to adjust it “manually”. Simple forms with “taxi” enabled do not cause common problems, but even simple forms that were created under the old interface, they are not yet well represented. This is due to the fact that the size of the fonts has become larger, so users can use a “different” monitor. Given the form, it is natural to require further processing - this can be done without any special problems, but significant changes are required here.
People are trying to get victorious Qiu problem So that it doesn’t become a “stumbling block” when switching to the new version 8.3. Even though a decision is approaching to allow a smooth transition to Taxi, there are no significant problems with the program adaptation process. It is important to allow the use of old folding forms without reworking. Of course, in the new interface, this form no longer looks like the old one, but at the same time it won’t be completely thorough, but it will be possible to use it and all the capabilities of the interface will be available.
You can set up "Taxi" for yourself in 4 hours (1C: Accounting 8.3, edition 3.0)
2016-12-07T18:49:42+00:00In this article, I will tell you how to work in the new 1C: Accounting 8.3 “Taxi” interface, easily and conveniently for an accountant.
Take just 4 minutes to set up the “Taxi” interface for yourself and appreciate all its advantages. If you are still in doubt: whether to cross over or not, then my thought is clear – move on. Taxi is better. Taxi is more convenient. And it’s so easy to get caught up in something new.
If you haven’t turned on the “Taxi” interface yet, click on:
Select the “Taxi” option and press the “Restart” button:
Then obov'yazkovo go to the "Administration" section, "Interface" item:
And we also install the “Taxi” option here and press the “Restart” button again:
Krok No. 2. The division panel is adjustable.
Here you can see on the right side of the window there are sections that we rarely or never touch and press the delete button:
Most often, such “unloved” sections are “Kerivnik”, “Vyrobnitstvo” and “OS and NMA”:
And, you decide, in the lower left part of the window you can set to show “Baby and text”, so that with pictures you can more easily find the sections:
Click the OK button and the division panel will change:
Result: lost everything else needed, pictures appeared.
Croc No. 3. Adjustable panel of open windows
In the new interface, it is not possible to switch between open windows, since the panel of open windows is hidden. Let's imagine it.
After dragging, press OK and now at the bottom of the main window of 1C the window that we open will be displayed:
Result: At the bottom of the main window, documents, documents, journals, etc. are displayed.
Croc No. 4. Enables the "All functions" menu.
Duje Coryna Possibility, if you tried to find out what name or document, but were unable to do so through the sections panel. This option will take you to the “All functions” menu, where you can open all messages, documents, advisors, etc.
This option is covered, but it’s easy to change.
Check the box "Display command All functions" and click OK. Now, any message, document, document, journal, or processing can be selected like this:
Result: It became possible to unhide messages, documents, journals, documents and data that could be found in the main menu of the system.
Well done, that's all
Before the speech, on to the new lessons...
With respect, Volodymyr Milkin(vikladach
The article continues the cycle “The first steps in the development of 1C”. We will look at the new “Taxi” interface from both the salesperson’s side and the programmer’s side.
Stagnation
The statistic shows the “Taxi” interface of the configuration developed on the 1C 8.3.4.465 platform. The information is relevant for streaming platform releases.
New Taxi interface in 1C:Enterprise 8.3
In addition to the already basic interface options “in other windows” and “in bookmarks”, the 1C:Enterprise 8.3 platform has a new interface - Taxi.
When a new one is created koristuvach interface The developers of the platform set a number of targets for themselves.
Configuration fragments can now be processed via the Internet using a basic web browser, the platform is clearly oriented towards working with mobile devices, and entering information using additional touch screen, which reacts to drugs before.
New interface There are significant visual features - the large size of the ceramic elements, the large font, the significant gaps (approaches) between the elements, the color scheme has changed, the activated elements of the ceramic are visible in color too.
In addition to the emphasis on friendliness and user-friendliness of the computer interface, great respect was placed on applied directness, which would make it easier to carry out the same operations.
Customers have received improved navigation capabilities through the app, more work space to customize, work with history on the web browser history tab, and increased selection options in the entry fields.
Let's take a closer look at the new taxi interface.
When you use the Taxi interface, the add-on is basically a window, in the middle of the work area in which all other windows are opened.
Windows are not displayed side by side on the panel manager Windows The icons are visually drawn on top of the main window (for example, the browser element selection form).
The work begins from the cob side. This side cannot be closed. It is to blame for the different forms of configuration that are most often abused.
To make it larger, press it onto the image.
The ability to customize the forms that are displayed on the front page has been added in the design mode. To do this, select the item from the main menu View– Adjustment of the cob side.
Basically, the program consists of several panels and areas, each of which has its own functional purpose.
For more help buttons F6 You can switch focus between shapes on the front side.
Basically, the program consists of several panels and areas, each of which has its own functional purpose. The mutual rotation of the panels can be adjusted by the configurator and by working with the configuration while working.
1. Sections panel
The partition panel displays a list of high-level configuration systems.
The skin section of the design appears around the button (bookmark). The section with the Heading header is displayed first left-handed.
To make it larger, press it onto the image.
If the screen width is not enough to display all sections, a scroll button appears on the panel (an arrow appears):
To make it larger, press it onto the image.
When you press the target on a specific section on the flow section function panel, the commands for the selected section are applied.
To make it larger, press it onto the image.
When you press the target again, a list of all commands for the selected section – the function menu – appears on the screen.
To make it larger, press it onto the image.
2. Panel of functions of the flow section
To make it larger, press it onto the image.
It displays the commands of the selected section. When a hyperforce is pressed, the corresponding command is selected (for example, by opening the form to the list of documents “Product Reliability”).
3. System command area
On the left side of the expansion area there is an icon for access to the main menu, which contains the classic items File, Editing, View, etc. From the keyboard, you can activate the main menu by pressing the F10 button.
The right side of the area has expanded commands for saving a file, a friend, I'll look back in advance, robots with instructions, calculator, calendar, etc.
4. Toolbar
On this panel, there are expanded buttons to open the menu of streaming functions, accessing selected items, viewing history, and searching for data.
Using the additional buttons on this panel you can speed up and make navigating the configuration easier.
5. Critical panel
To make it larger, press it onto the image.
This panel displays a list of open windows. The forms of the working area of the front page are not displayed as well as the forms on the side panel.
6. History panel
In the Taxi interface, the history panel is close to the web browser history.
The history panel speeds up access to the most important objects of the day – opened, edited or added documents, documents, etc.
The entries are divided by day, and opposite the skin row the hour of the day is indicated. Within one day, the recording is ordered by hour of access.
The user saves no more than 400 entries in the history. If the number of saved elements exceeds 400, when new history elements are added, old entries are deleted.
Create a row to search for history. By clicking the history rows, you can also jump between open program windows.
7. Display panel
The search bar is also "locked" into the web browser. Navigation messages are saved here, which are specially marked as being used for quick access.
Now the selected one saves not just data, but also commands.
You can add an object to the selection by clicking the mouse on the star icon.
To make it larger, press it onto the image.
There is also a search row on the panel. The titles of the elements located in the selected item can be edited.
For this purpose there is a small button with an oval on the right side of the selected row.
The platform has implemented a special form of full-text search. This form is only available if the full-text search is hidden.
To make it larger, press it onto the image.
You can click the search form from the keyboard using the additional keys Ctrl + Shift + F.
At the bottom of the main program window you can find an information panel.
This is used to display performance indicators and indicate that the server time delay simulation mode is enabled.
Now productivity indicators are displayed not in the side view of the window, but in the side view of the main program window panel.
The panel is displayed if the “Display productivity indicators” option is set in the system parameters:
The window appears now at the bottom of the form and can only be seen if it is displayed again.
To make it larger, press it onto the image.
For form fields that look like “proportion field” and “mix field”, it is possible to display the toggle switch appearance (a number of buttons, shading handles, the color of the exact value is visible).
Another innovation in the Taxi interface - groups that light up, which allow you to save space on the screen, remove most of the dirty information, and only when you need to clarify - light up groups y, detailed information.
The larynx is not available for the primary group with a modified title.
The Taxi interface features large fonts, sizes of control elements, and wide spaces between elements.
Forms, parts for emergency ceramic interface When switching to Taxi, they will not look much more friendly. Therefore, the power of form was realized in the Option of Scale.
The work option that applies to the other option is the Compact scale, and timely solutions that allow you to transfer the configuration to a new interface. Then we will adapt the large folding forms to the new interface.
With this version of the work, a smaller font and indents are used, the form looks as similar as possible to the one divided into the 8.2 platform.
The configuration guide can indicate the configuration of the panels. The editor can be opened by pressing right button targets in the configuration tree by the root element that opens context menu Select the item "Open the client program interface."
On the right side of the window there is a display of all those present in the panel interface. Using the mouse or Add button on the left side of the window, you can determine the mutual arrangement of panels on the screen.
The skin panel can only be used in wood once. The editor does not allow adding two new panels to the tree. The panels that are already located in the interface are indicated in the right corner in the list of standard panels by an icon that looks like a gray square.
To make it larger, press it onto the image.
In the Taxi interface in customer mode, you can adjust the layout of panels on the screen. For this purpose, the Panel Editor, which can be opened from the main menu View - Panel Settings.
You can then move the icons that represent the sections that appear in the rows and columns of the panel editor so that the panels are visible in the required parts of the screen.
To prevent each section from being displayed in the interface, you need to move it to the bottom part in a field with a gray background.
If the user has a small monitor, then to save valuable work space on the screen, you can display all panels.
For this purpose, the main menu item Viglyad – Catch all panels is assigned.
At the top of the forms, navigation buttons are displayed between open windows. The appearance of these buttons is again similar to that of a web browser.
To make it larger, press it onto the image.
To turn to the front side, press the Home button. To move between active forms, use the Back-Forward buttons.
In the Taxi interface, the navigation panel for the form is now left-handed, and not left-handed, as was the case before.
To make it larger, press it onto the image.
On platform 8.3, on the admin side of platform 8.2, in the authorities of the root element of the configuration, replace the item “Unlock” command interface desktop" - "Open the command interface of the main section", and instead of the item "Open the working area of the desktop" - "Open the working area of the front page".
The appearance of the calendar has been changed. We have several lists in which you can select the date of the month.
You can also move to the previous and previous months using additional buttons showing left and right arrows, as before.
The root element of the configuration has the power "Interface power mode":
- Version 8.2 – the client program runs in the 8.2 interface. Switching to the taxi interface is impossible.
- Version 8.2. Allow Taxi – for promotional applications, the interface of version 8.2 is required. You can switch to the taxi interface for an additional dialog of parameters or command line.
- Taxi. Allow Version 8.2 – Taxi interface is used for promotional purposes. You can switch to the interface of version 8.2 for an additional dialog of parameters and command line.
- Taxi - the client program operates in the Taxi interface. Switching to interface 8.2 mode is impossible.
When using the 8.2 interface, it is permissible to mix between the interface in adjacent windows and the interface in bookmarks.
We have finally finished talking about the advantages that the new “Taxi” interface brings to the table. Perhaps the biggest advantage is that working with the program has become much easier. I remembered the following moments:
- Current program design
- Great font
- Wide possibilities of setting up your work space
- Ease of navigation when accessing additional panels in Vibran, History, etc.
- Improved ergonomics of certain interface elements
- Possibility of creating new elements from the selection list.
For those who want to bury their knowledge in innovations ceramic forms the new Taxi interface definitely has
1C: Accounting is one of the popular programs for accounting Traditionally, one of the strengths of this program is its high level of ergonomics, which is constantly being improved. With the release of version 3.0.33, a new interface was introduced, which took away the name “1c taxi”. Today, it is possible to vikoryst the old interface, so that the distributors will be able to vikorist the “taxi” itself. old version Let's stop trying.
1s taxi – what is it?
"1C Taxi" - tse new look an interface that has come to replace the past one, which is definitely outdated. Innovations can be done using the “1s Accounting” program. As the distributors themselves say, the new interface was promoted through those whose audience, which is actively vicorist program, has significantly expanded beyond the number of untrained correspondents, which called for improvements in usability.
Before the old interface there were the following complaints:
- The number of elements on the working panels is too great, making it difficult to find what you need;
- Pogana robot search for “stories”;
- Folding robot shape select;
- Different sizes of interface elements.
All these problems were addressed during the development of the “taxi”. The new interface has a low adoption rate, but the program can be used by people who have had little experience working with similar programs before.
Prote Interface 1C received criticism from the side of some pros. Most people give him a positive assessment. In many cases, negative clicks are due to the fact that “taxi” has a great amount of adjustment, which allows you to use the program as manually as possible, but if you choose the wrong robot option, it may, however, be complicated.
First of all, in order to start working with the new interface, you need to carefully adjust it so that you don’t get stuck in the future.
Setting up
After you launch the initial configuration of 1c: Accounting 3.0, you will download the 1c interface:
- system command panel (light);
- Toolbar (at the top left corner);
- Section area (left-handed screen).
Most of the screen takes up cob side", which includes a list of accounting items, a server monitor, a search field and confirmation messages.
At the bottom right, it merges the window with the details of the backup setup. By clicking on the box, you will go to the menu where the creation of backup copies will be configured.
Setting up the door backup copies It is designed individually for the skin surgeon, so in order to save all the data, adjust backup copy for all koristuvachs.
Please note that when working with multiple computers in one program, there is a need for rapid communication between them, so uncheck the box “Save automatic copying when programs are completed.” On the right is that this time, when exiting programs from one account, a backup copy is created. This process It takes up to an hour, after which working with other money-makers becomes cumbersome.
The area of system commands has become unchangeable, which is why adjustments do not require much nourishment from old hackers. For new users, this panel is intuitive and simple.
Criticism calls for a change in the layout of the panel sections. Previously, it was located at the top of the working screen. In “1C 8 3 taxi interface” this panel is located on the left side. In addition, “taxi” does not provide the ability to show windows in bookmarks, which would allow them to be rotated to whatever form was previously opened.
Tim no less, problems often arise from the process of changing panels. What you need to do is:
- Know the "menu" field;
- Vibrati item "Viglyad";
- In the middle of the sub-items select “adjustment of panels”.
The panel editor will appear on the screen. Vin is very simple and simple in vikoristan. By drawing the panels on a template, you can customize your workspace the way you like.
With some simple manipulations, you can bring the interface to a more familiar look, compared to previous versions. Please note that the size of the screen matters. So, with a small resolution, you will not be able to move the function panel to half a share the screen is uphill. The section panel, when properly frozen, replaces bookmarks, which the new interface does not have.
If the screen resolution is small, you may want to completely remove the function panel from the work field. You can always access this panel by clicking on the appropriate element. This method The unique panel of functions is very powerful, so it doesn’t take up a lot of space.
In addition, if you have openly closed sections and are not using a widescreen monitor, their labels may become unreadable. In this situation, it is much easier to place this section on the right side of the screen, in this case all tabs will be readable.
In some situations, users need to frequently interact with the selected panel and the history panel. The stench is initially invisible, and is heard when you press behind the main element. However, behind the scenes, you can make these panels visible.
Adjustment of sections
Okremo varto zupinitsya adjustment of the divisions themselves. Previously, you could go to their settings by clicking the right mouse button. "1C Taxi Interface" has no such possibility. To print the settings, follow the address: “menu - view - settings - section panel”
In settings, you can select sections so as not to be confused, and also change their display order. These are the types of images:
- Text;
- Image;
- Text and images.
You can also customize the function panel for the skin area. To do this, you need to click on the required section and click on the “navigation settings” button. At the screen, you can click on or open other commands, as well as change the severity of their display. In addition, you can move the command actions to a special “more important” menu. Such commands are always listed at the top of the list, and their names are shown in bold.
If necessary, you can update the standard command settings. Respect Varto, scho standard setupє optimal programs for rich business owners. To turn to them you need to:
- Press the “more” button;
- Select the item "Install default settings".
However, there are times when you turn on the visibility of all available commands to a section, and you may not find the command you need. In this situation, a special team called “all functions” comes to help. Right from the start, it’s been fixed up. To do this, you need to turn on your visibility.
When the “all functions” command is activated, a tree will appear in front of you to contain all program objects. Here you can open any document or document.
Adjusting the type of forms
When switching to the Taxi 1C interface, clients often criticize the awkwardly organized text buttons on document forms. In this case, the presence of the following buttons is indicated:
- Copy;
- Change;
- Significantly visible;
- Paste.
Of course, these commands are in the program, they can be found by clicking on the “more” button.
By selecting the “change form” item there, you can manually select which buttons and in which order they will appear.