Shvidke set up the TP-LINK TL-WDR3600 router.

Routery

The TP-LINK TL-WR702N dartless router fits in crowds and provides good performance.

You can set up your router so that the Internet can work on all devices for a small fee.

The first thing you need to do with a skin router is that it is necessary for the Internet to work at any location. By the way, there is a socket there. Once purchased, the device must be connected to the computer using an additional Ethernet cable.

Shvidke got better

It is clear that there are many different Internet providers, and they respect that their Internet must work “out of the box”, just like any device that connects to it.

For whose sake it would be good to go

“Shvidke nalashtuvannya”

, where in the dialog mode you can configure the necessary settings for Internet use.

Shvidke got better

Access point mode Router mode Manually setting up the router Manually setting up the router allows you to specify the skin parameter. This gives you more options, but you will have to go through different menus.

You first need to select which mode the router works in, which can be done by opening the third item in the router menu. Vibrated item"AP" you need to press the button"Save" And if your router is in a different mode, you need to re-enable it and then you can continue until the next time. The fragments of the access point mode are transferred to continuation wire mesh.

, it is necessary to fine-tune dartless connection. For what you need in the menu select"Wireless" - Open the first point"Wireless Settings" Here we have to beg in advance"SSI

D" or they have boundaries. Then.

In this regard, it is important to select a security algorithm. Manually setting up the router allows you to specify the skin parameter. It so happens that the router over-involves them for reliability and security, which is growing in the plan.

The best choice is WPA-PSK/WPA2-PSK. Before entering the parameters, you need to select the WPA2-PSK version, AES encryption and enter a password. This completes setup in access point mode. By pressing the button, you may be afraid that adjustments will not take place until you restart the router. By pressing the button.

For whom is it opened?

It is clear that there are many different Internet providers, and they respect that their Internet must work “out of the box”, just like any device that connects to it.

"System tools" , select the item"Reboot" then press the button After the re-enablement is complete, you can try to connect to the access point. After setting up your Internet connection dartless lines

You can configure the configuration using the IP address.

You can earn money by moving to
"DHCP" , they will immediately open up"DHCP Settings"

Here you can activate or deactivate the IP address viewer, specify in which range of addresses will be visible, the gateway and the domain name server. On the back panel of the router there is a bunch of sockets:, Connect our edge cable to the WAN port (blue color). U
port LAN 192.168.0.1 .
(Be sure to) connect the cables to the computers that connect to the router. Go to the router configuration web interface:"і" Open your Internet browser window (for example, Internet Explorer Mozilla Firefox": , Google Chrome); "In the address bar of the browser (1) enter": , Google Chrome)).
Show up(2) by asking " Login (name of koristuvach)":

Password "(For the preparations: " Login (name of the accountant) admin"(2).

Password Press ""(5).

OK admin You will go to the router interface. Select section " Quick Setup "(1) press the button" Next If you have connected a cable to a computer that was connected to the Internet before connecting, select ""(7).

So, clown to the Mac address

"Select the operating frequency of your measurement and press ""(8). Model TL-WDR3600 є dartless router With reduced characteristics, the Vikorist simultaneously operates a wide range of frequencies of 5 GHz and the traditional range of 2.4 GHz.

"Simultaneous use of two bands allows you to reduce the overall throughput up to 600 Mbit/s, which ensures the immediate operation of many additional applications that can handle more"(10): throughput capacity

"the canal at the borders of the great budinka."(11): this is a standard connection, for communication in a dartless local border zone frequency ranges 2.4 GHz. We recommend contacting

"802.11b/g/n Enable Security (WPA-PSK/WPA2-PSK)

""(12): authentication method. PSK Password "(13): password for accessing the router via WiFi boundaries (at least 8 characters for the English layout). You need to come up with it on your own. We strongly recommend installing

folding password

, Viglyad h5YtP87vBT. The password in this field is indicated on the sticker on the bottom panel of the router. Router ready to robot.

Try going to our website, and then to any resource on the Internet. You will need to register your new vehicle. How did you clone the Mac address? border map

, since it is connected to our cable to the router, the Internet is requested immediately.

For robots digital tower, .

dodatkovykh nalashtuvan There is no need to vibrate. additional information

Since you have a lot of food, you can go crazy before the service

technical support

Setting up the router transfers changes to the necessary parameters in the device interface.

The setup method may involve not only connecting to the Internet, but also operations such as, for example, installation
local measures
, changing passwords, setting up ports.
This article provides the most comprehensive instructions “how to set up the TP-LINK WR741ND router” in different ways.
Type and recognition of indicators
To display the activity of these and other processes using this function, the router displays special indicators located on the front panel of the router.

The indicators display intuitively understandable icons that display the activity of processes or connected devices:

indicator of device activation; The function of testing the router is good. If the indicator flashes periodically, no malfunctions have been detected in the robot, and no faults have been detected in the system; Wi-Fi module activity; LAN port indicators display computer connections to the device;

Internet connection indicator of the device;

QSS system.

Connection to a computer
Connection
TP-LINK router

TLWR741ND is connected to the computer

Wi-Fi will help

Connecting to the Internet requires both an additional configuration master, which can be launched from the disk that comes with the router, and an additional web interface.

To set up, you will need the values specified by the provider in the contract.

First of all, before setting up the parameters of the router, make sure that no IP address is installed in the settings of your router card.

For a correct connection, you must select the option – assign an IP address automatically.

Setting up the TP-LINK TL WR741ND Kyivstar router
To set up promotional routers in Kyivstar you need:
go to the device interface (192.168.1.1).

The login and password are often changed by providers who supply the router, for example, on Kyivstar routers the login password is set to kyivstar;

open the “Merezha” tab and go to the “WAN” section; select “Dynamic IP Addresses” and click “Save”; To set up security, you need to open the “Dartless mode” and go to the “Dartless mode protection” section: You can also change standard password Wi-Fi limits

You can set up your router so that the Internet can work on all devices for a small fee.

for a larger folding one, such a building will provide more security

high rhubarb

zakhistu.

The configuration guide for the TP-LINK WR741ND router allows you to configure settings for users who are not required to set up an Internet connection.

For quick setup, you need to go to the device interface and select the “Sweep Setup” menu. If you do not know the type of your Internet connection, then during the installation process it is recommended to select the “Auto-assignment” item. You will also need to enter your login and password as provided by your provider.

For this additional function, the program registers the most suitable settings for your connection.
After setting everything up, you need to restart the router to update it with new parameters.
Video: Swedish setup of TP-LINK TL-WR741ND
Manual adjustment To set parameters VPN connection
it is necessary to cancel the following operations:

Open the “Merezha” section of the menu and go to the “WAN” item.

In the "WAN Connection Type" field, set the type to PPTP.

It is also important to remember the fact that some providers implement filtering for the computer's Mac address.

To solve this problem, it is enough to write the following:

Setting up for operators MTS, Beeline, Rostelecom

Setting up for other Beeline and MTC operators requires additional values for the IP address, admixture masks and other parameters.

Acting operators specify adjustment data in the contract.

Setting up Wi-Fi

Wi-Fi setup can be done using the “Dartless Mode Setup” section, which can be found in the “Dartless Mode” tab:

Local measure

To configure the local network of the TP-LINK TL WR741ND router, you need to select the following operations:
go to the “Merezha” menu and open the “DHCP” section;
enable "DHCP server"; indicate the range of these addresses that will be assigned to computers home measures
.

For example, the first address is 192.168.1.100 and the last one is 192.168.1.200;

save your adjustments.

The TP-LINKTLWR741ND router has a simple and intuitive interface that allows you to establish an Internet connection, as well as configure various parameters without any intricacies.

And finally, setting up your Internet connection quickly is the simplest thing Nutritional summary: How to set up devices on Windows 7?

Setting up the TP-LINKTLWR741ND router on different operating systems

This will not work unless you set the option to automatically remove the IP address per hour of connection.

For Windows 7: Server panel – “Center for Internet Management” – “Change adapter parameters” – “Authorities of your connection” – “Internet Protocol version 4 (TCP/IPv4)” – Unlock the authorities – “Override the IP address automatically.” What are the features of setting up a router on Windows 8?

Connecting and setting up the Internet in Windows 8 is similar to installing the Internet in

Windows system 7 Besides, you are not to blame for the daily unforeseen problems in the adjustment process. Why bother, since there is no disk with PZ? How to configure without a disk? Himself forgive the decisions

In this situation, it is necessary to attract this software on the Internet, since there is no such possibility, then we will help you

manual adjustment

Internet parameters of the TP-LINKTLWR741ND router. , Google Chrome) /, Google Chrome) Select on your computer the connection authorities to the local network to automatically cancel the settings. You can set up your router so that the Internet can work on all devices for a small fee. and press Dali

3. At the next window, select PPPoE/PPPoE Russia and press Dali.

4. Enter your login/password regional registration UNET.BY and press Dali.

5. It's time to come configured Wi-Fi(about him will be written below, in detailed adjustment, that in Bezdrotove speech Select Vimknuti). Press

Dali 6. After setup, a window will appear with information that setup is complete (we have turned on Wi-Fi, otherwise there was no need to restart b) and you need to restart the router..

Weather and pressure Rezavantazhite 7. After re-engaging for 5–10 seconds, access to the Internet may appear.

At the deposit