ATOL drivers are a special program that is necessary for the interaction between a cash register and a computer. This security software will significantly speed up the process of paying for a purchase, as well as simplify your financial management.
Capabilities and functionality
ATOL is necessary for any customer who has a minimal knowledge of working with cash registers to be able to successfully interact with it. Finally, you will be able to support the fiscal apparatus by entering information about all expenditures and income into special program. For robots with ATOL there is no need to create special profile or Vikonuvati additional adjustment– All ready-made configurations can be found in the menu. They need to be adjusted correctly. The settings will be automatically saved and updated in case of system failures.
The program can detect the presence of a connected device, supports work with multiple cash registers connected to one computer, and can also work with remote cash registers connected to a PC through a network. When you manage a cash register, you can carry out sales transactions, pay, reverse, check or cancel a check, cancel medical bills, discard adjustments, withdraw various accounts, and withdraw money from others. y.
Crazyness
ATOL drivers are compatible with such fiscal registrars - ATOL, Shtrikh-M, Pilot, Iskra, MultiSoft, ServicePlus, IKC-Techno, NCR, Resonance, NPF Unisystem and Newton. With programs that you can “get along with,” you can use the company’s products 1C, Microsoft Office, Microsoft Visual FoxPro/Basic/C++/C# and others.
Key features
- Supports Windows 7 and beyond early versions given OS;
- necessary automated robot operation with a cash register;
- gives the ability to robots with remote control;
- crazy with software products such as 1C;
- allows you to use not only the ATOL cash register, but also other cash registers;
- You can interact with many devices connected to one PC.
Note: This article was written for KKT ATOL, which is consistent with Federal Law-54 (Online-kas). How do you have a cash register? old model, then in steps 3 and 6 you will have one COM port, skip steps 11-13.
1. Install the ATOL driver as administrator. Follow the installer's recommendations:
2. Connect the device via USB cable to PC.
3. Open “Device Manager”, KKT ATOL may appear as “ Invisible device", or as shown on the little one (when the ATOL KKT is connected via a USB cable, two devices may be displayed):
4. Right-click the mouse on the device and select “update driver”.
5. Select “Search for drivers on your computer”:
6. Install the drivers from the following folder: C:\Program Files\ATOL\Drivers8\USB_Drivers. At correct installation The device driver will display an ATOL icon:
7. Now we open “KKM Driver” (you can find it by searching on your computer) and press “Adjustment of authorities”:
8. Now select the item “Search for possession”:
9. In the search parameters, indicate the model of your cash register and press the search. The driver is responsible for knowing the device, specifying the speed of the robot and the COM port:
10. Next, in the connection parameters, you can indicate the same values as when you saw the driver at the previous point (we are looking for ownership), as well as indicate the model of your device and press verification of the connection. If everything is set up correctly, your device will appear in the “Result” row:
12. Now we launch “Driver Management” as an administrator. The KKM field contains sufficient information that the KKM means. In the COM port field, enter the port number for exchange with the OFD (this is the other port that is displayed in your device manager, not specified in the POS printer driver). Check the Autorun checkbox and click the Run button:
13. Check that the setup port is correct. There is a record in the logs that the port is assigned correctly:
14. Now install the Subtotal program, following the installer instructions:
15. After launching the Subtotal program, open “Settings” and select the “KKM” section:
16. Select “connect” fiscal registrar» Then enter the main login and password in Subtotal, select the store and point of sale:
17. The prisoner is configured with the ATOL driver, payment codes “0” and “1”. Next, click on the blue gear and specify the parameters exactly as in the “KKM driver” (point 10):
18. Click “Finish” and “ok”, the program will restart – the setup is now complete.
First install the driver, you must switch the cash register to the required mode. For which device you need to turn it off, then press the stitch feed button and then turn the machine off again. Pide 4 sound signal. After a few seconds, before the 5th signal arrives, the stitch feed button must be released. The device will display a receipt that will indicate the selection of available options in the service mode. One possible options representations on the next image:
1- Output, 2 - Exchange channel, 3 - Exchange protocol
To select the desired mode, press the stitch feed button with a pressed knob. So, at the above application, pressing the button 1 time will cause an exit from the service mode, 2 pressing will provide access to setting up the exchange channel, and 3 pressing will provide access to setting up the exchange protocol.
To install the driver, the cassette must be switched to the "Exchange Channel" mode. On our sewing machine, press the stitch feed button. Koristuvach can show you the available exchange channels, for example, the list can look like this:
- Vikhid
- RS-232
From the list provided, you need to select USB. For our application, you need to press three times on the stitch feed button. If everything is connected correctly, the device confirms the USB connection:
Now use the same method to select the exchange protocol – Atol 3.0. To do this, in the service mode menu, select the “Exchange Protocol” item. In the application, point 3, then you need to press trich on the stitch feed button. The device has a variety of available protocols, for example, as in the following image:
Now, having pressed the stitch feed button three times (every time), you need to select the Atol 3.0 protocol. Upon confirmation of your choice, the device will display the “Atol 3.0 inclusions” notification.
Now you can exit the service mode. To do this, in our application you need to press the stitch feed button once (menu item "Exit"). The device is ready for use:
Well, everything is ready before installing the driver.
Since the early stages are going wrong, it is recommended to scrap the entire algorithm from scratch. Since the CCP cannot be switched to the required mode, it cannot be switched to the required mode.
Driver installation
Driver for KKT Atol Roztashovany at the address https://install.kontur.ru/atol
After pressing the "Next" button, the user can select components to install or install them after installation: 
Once the installation is completed, the computer must be restarted:
Now the driver is installed and ready for adjustment.
Adjusting the driver
We need to open the dispatcher first Windows devices: "Start" - "Control Panel" - "Device Manager". Next, you need to expand the list item “Ports (COM and LTP)” and select “Serial port (COM)” (or “Device with serial interface (COM)”). On click right button You will see a menu where you need to select the “Update driver” item: 
In the window, select “Look for drivers on your computer”: 
Then click “Select a driver from the list of driver installations”: 
At the next stage you need to click the “Install from disk...” button: 
At the end it is necessary to indicate the route to the Atol driver. For installation C: Program Files (x86) ATOL Drivers8 USB_Drivers. Once the driver is selected, press the “OK” button: 
In the window that appears on the screen, you need to uncheck the box “Only crazy devices”:
Koristuvach go to the driver selection menu. In the left column select "ATOL group", and in the right column - "ATOL FPrint USB": 
After pressing the "Next" button, the system appears in advance - after pressing the "So" button: 
The system will install the driver, and if everything goes well, in the “Device Manager” section, under the “Ports (COM and LTP)” section, your name will appear: 
The same operation must be repeated for another port: 
Setting up Ethernet over USB
To connect KKT Atol with the fiscal data operator, you will need to set up the Ethernet over USB (EoU) service. But you need to reconfigure so that all files for this service are installed. You need to open the folder C:Program Files (x86)ATOLEthOverUsb and check that it has a structure like the one shown below:
If all files are on the site, you can go to set up the service.
Need a standard one Windows Notepad, which track should be launched under the administrator name. In Notepad, you need to open the settings.ini file and correct the number = “number” row. You need to enter the number of the COM port used by the service. To find out, you need to check the data from the Atol registration utility and Device Manager. The application has connections to port COM3, and the utility shows COM4. You need to change these values in the settings.ini file and write it as shown in the little picture below:
I work with 1s 8.3x32 and all Atola 8 CCP drivers work!
PC:
Windows Server 2008 x64, RDP mode
1C:Enterprise 8.3 x32 (8.3.11.2867)
Business Accounting, edition 3.0 (3.0.54.20)
KKT Atol-FPrint-22PTK
Atol driver 8.15.3.8197
Installing 1C:Enterprise 8.3x64 in hopes of using DTO 8 from Atol, and deleting "Do not install on a stream computer. Type is not specified: AddIn.ATOL_KKM_1C82_54FZE":
I in 1C:Enterprise 8.3 x32 NOW THERE IS NO CASE.
Reinstalling 1C: Enterprise 8.3x32 does not help.
Only ZNOSIMO 1C:Enterprise 8.3x64 And without re-engaging, everything is working normally!
Rumors on the Internet yield nothing (surprisingly, 2017)
You have to live in bad manners. Exciting new drivers Road accident 10.1.1 after unpacking it was marked taka installer, which includes the distribution kit KKT10-10.1.1.0-windows64-setup.exe (and KKT10-10.1.1.0-windows32-setup.exe).
Launchable KKT10-10.1.1.0-windows64-setup.exe And for example, 1C: Enterprise 8.3 (8.3.11.2867) x64 The drivers are miraculously installed and the cash register works (the drivers appear as if they were 9).
If you run 1C 8.3x32, then the DTO 9 drivers will not work there. This is what is required - it is permissible for you to use Shtrikh-M FR (only under 1C 8.3x32). It is necessary for everything to work at once - then we can understand 1C on x32.
We turn over the Atol driver for 1C x32. In parallel, KKT10-10.1.1.0-windows64-setup.exe will complete the installation KKT10-10.1.1.0-windows32-setup.exe, then in 1s 8.3x32 yak i DTO 9 and DTO 8 will not be processed.
Cleaning the PC from Athol also helped. Why does the utility show Windows program Atol is encrypted and write that it is Atol - for example, the KKT 10 driver....). Be respectful. For example, I had DTO6, DTO8, DTO9, and DTO10 (installed twice). Another master of licenses.
Instructions for the integration of third-party application software with cash register technology produced by the ATOL companySection 1: Integration of software and cash register "ATOL" with the library of KKM Drivers 2
Section 2: Integration of software with the support of the Lower Level Command Exchange Protocol. 3
Section 1: Integration of software and cash register "ATOL" with the library of KKM Drivers
The 54-FZ support is implemented in driver versions starting with 8.10.2.0 for DTO8 and 9.7.0. for DTO9.Integration requires availability of KKM Driver distribution kits:
"ATOL: KKM Driver 8"
The driver is an external component for the 1C:Enterprise system and the OLE Automation and ActiveX server, which runs under Windows 2003 x86 / XP x86 / Vista x86 / 7 x86 / 7 x64 / 8 x86 / 8 x64. You can get involved in any of the core components of OLE Automation that support the technology.
Drivers for Commerce 8 are available for download at:
Installed
Launch installation file DTO _8_12_ Full . exe . Stop installing the driver following the instructions. It is recommended to forfeit all values for the promotional items. Once asked, the system confirms the installation of additional software security firmly.
At the hour of installation, the driver driver program will start (after installation it will be installed in:
C:\Program Files(x86)\ATOL\Drivers8\
The “Mode” option may have the value “ Cost-free version", otherwise you need to set the required values by clicking on the "..." button in the "Cost-free version" section. Document "Programmer's work" log in to the distribution kit. After the installation of DTO8, accessible by the next path (behind the path):
C:\Program Files (x86)\ATOL\Drivers8\Doc\Drivers8_FprnM_PM.pdf
The robot driver with FZ-54 supports the following models:
Table 1
| Model | Model code |
| ATOL 30F (ATOL FPrint-30ENVD) | 61 |
| ATOL 77F (ATOL FPrint-77ENVD) | 69 |
| ATOL FPrint-22PTK (ATOL FPrint-22ENVD) | 63 |
| ATOL 55PTK (ATOL FPrint-55ENVD) | 62 |
| ATOL 11F (ATOL FPrint-11ENVD) | 67 |
| ATOL 5200F (ATOL FPrint-5200ENVD) | 64 |
| ATOL 25F | 57 |
The performance of the models indicated in Table 1 is supported by Protocol 3.x
that's it.
After successful installation of the DTO, it is necessary to install the driver connection with the cash register equipment. For whom it is necessary to quickly obtain documentation:
Connecting Projects to Various Programming Centers
After installing DTO8, connection applications are copied from different media to make the integration process easier for software developers.
C:\Program Files (x86)\ATOL\Drivers8\Samples\FprnM
Guide to operation
FPrint
-22PTK
:
on the butt model ATOL FPrint-22PTK (ATOL FPrint-22ENVD). U this document description of the process of installing the DTO, connecting, searching and adjusting the equipment. For skin specific model It is necessary to quickly obtain the documentation for the operation manual for the CCP model you have purchased.
"ATOL: KKM Driver 9"
The driver is a set of libraries (*.dll) for operating systems the Windows NT/Windows CE family, or (*.so) for Linux, intended for use in additions written in my C++.
Drivers for Commerce 9 are available for download at:
1. Unpack your archives X _X. zip at any place available. Then unzip the archives to move the folders:
android- libraries for Android
doc- Documentation
include– header files
linux-armhf– libraries for arm architecture
linux-x64- libraries for Linux x64
linux-x86- libraries for Linux x32
nt-x86-mingw- libraries for Windows
samples– apply vikoristannya
2. At dad's Drivers_trade_ownership_9_X_X\doc unpack archives doxygen.tar.bz2 V docs. In the middle of the folder docs\html open the file in your browser index.html- Open up head side documentation from report description I will arrange internal DTO9. The same description is given of the duration of work with Federal Law-54 large models.
The ATOL section: KKM Driver includes applications for the use of the driver and connections in various ((C++), (Java), (Android)) development environments software security:
Section 2: Integration of software with the support of the Lower Level Command Exchange Protocol.
For the interaction of software with cash register technology and ATOL registration following the Protocol, it is necessary to follow the document
Robotic KKM protocol 3.
x
- Career of the programmer
– This protocol describes the interaction between software and hardware using additional lower-level commands, including new protocol commands. Also here we describe the main points for connecting and setting up a cash register to exchange with the OFD.
There are two types of protocol of the Lower Rivne.
Nizhniy Reven v2 – page 10
Lower Level v3 – page 19 Reworked protocol by changing the lower level interaction algorithm.
The protocols are supported both by the implementation of 54-FZ and the old order.
Addendum 1: Notes and instructions for completing the addendum PZ:
The KKT registration utility is installed in the DTO8 distribution kit. Instructions after installing DTO8 are available immediately:
To establish a connection with a cash register, you need to transfer the FR to the Cash Register Protocol 3.0 by programming the values of Table 2 Row 1 Field 85 – 2. Or quickly access the service menu.
The EoU utility for transmitting data to the OFD via additional Ethernet is integrated into the Driver Management Utility. PC exchange channel – USB.COM