Instructions for the integration of third-party application software with cash register technology produced by the ATOL company
Section 1: Integration of software and cash register "ATOL" with the library of KKM Drivers 2
Section 2: Integration of software with the support of the Lower Level Command Exchange Protocol.
3Section 1: Integration of software and cash register "ATOL" with the library of KKM Drivers
The 54-FZ support is implemented in driver versions starting with 8.10.2.0 for DTO8 and 9.7.0.
for DTO9.
Integration requires availability of KKM Driver distribution kits:
"ATOL: KKM Driver 8"
The driver is an external component for the 1C:Enterprise system and the OLE Automation and ActiveX server, which runs under Windows 2003 x86 / XP x86 / Vista x86 / 7 x86 / 7 x64 / 8 x86 / 8 x64. You can get involved in any of the core components of OLE Automation that support the technology. Drivers for Commerce 8 are available for download as follows: _8_12_ Installed . Launch installation file
DTO
Full
exe . Stop installing the driver following the instructions. It is recommended to forfeit all values for the promotional items. Once asked, the system confirms the installation of additional software security firmly.
At the hour of installation, the driver driver program will start (after installation it will be installed in:
C:\Program Files(x86)\ATOL\Drivers8\
The “Mode” option may have the value “
| Cost-free version | ", otherwise you need to set the required values by clicking on the "..." button in the "Cost-free version" section. |
| Document | 61 |
| "Programmer's work" | 69 |
| log in to the distribution kit. | 63 |
| After the installation of DTO8, accessible by the next path (behind the path): | 62 |
| C:\Program Files (x86)\ATOL\Drivers8\Doc\Drivers8_FprnM_PM.pdf | 67 |
| The robot driver with FZ-54 supports the following models: | 64 |
| Table 1 | 57 |
Model Model code
ATOL 30F (ATOL FPrint-30ENVD)
ATOL 77F (ATOL FPrint-77ENVD)
Connecting Projects to Various Programming Centers
After installing DTO8, connection applications are copied from different media to make the integration process easier for software developers.
C:\Program Files (x86)\ATOL\Drivers8\Samples\FprnM
Operating instructions
FPrint
-22PTK
:
on the butt model ATOL FPrint-22PTK (ATOL FPrint-22ENVD). U this document description of the process of installing the DTO, connecting, searching and adjusting the equipment. For skin
specific model
It is necessary to quickly obtain the documentation for the operation manual for the CCP model you have purchased. "ATOL: KKM Driver 9" The driver is a set of libraries (*.dll) for
operating systems
the Windows NT/Windows CE family, or (*.so) for Linux, intended for use in additions written in my C++. Drivers for Commerce 9 are available for download at: 1. Unpack your archives X _X.
zip at any place available.
Next, unzip the archives to move the folders: android
- libraries for Android doc
- Documentation include
– header files linux-armhf
– libraries for arm architecture linux-x64
- libraries for Linux x64 linux-x86
- libraries for Linux x32 nt-x86-mingw
- libraries for Windows samplesDrivers for Commerce 9 are available for download at:– apply vikoristannya 2. At dad's Trade_drivers_own_9_ _X\doc unpack archives doxygen.tar.bz2 V docs . In the middle of the folder docs\html open the file in your browser index.html- Open up
Head side
documentation from
report description
I will arrange internal DTO9.
The same description is given of the duration of work with Federal Law-54 large models.
The ATOL section: KKM Driver includes applications for the use of drivers and connections in various ((C++), (Java), (Android)) software development environments:
Section 2: Integration of software with the support of the Lower Level Command Exchange Protocol.
For the interaction of software with cash register technology and ATOL registration following the Protocol, it is necessary to follow the document
Robotic KKM protocol 3.
x
- Career of the programmer
– This protocol describes the interaction between software and hardware using additional lower-level commands, including new protocol commands.
The KKT registration utility is installed in the DTO8 distribution kit.
C:\Program Files (x86)\ATOL\Drivers8\DOC\Registration Utility Koristuvach's Handbook.pdf
To establish a connection with a cash register, you need to transfer the FR to the Cash Register Protocol 3.0 by programming the values of Table 2 Row 1 Field 85 – 2. Or quickly access the service menu.
The EoU utility for transmitting data to the OFD via additional Ethernet is integrated into the Driver Management Utility. PC exchange channel – USB.COM First install the driver, you must switch the cash register to the required mode. For which device you need to turn it off, then press the stitch feed button and then turn the machine off again. Pide 4
sound signal
.
After a few seconds, before the 5th signal arrives, the stitch feed button must be released.
- The device will display a receipt that will indicate the selection of available options in the service mode.
- One
possible options
representations on the next image:
1- Output, 2 - Exchange channel, 3 - Exchange protocol
To select the desired mode, press the stitch feed button with a pressed knob.
Well, everything is ready before installing the driver.
Since the early stages are going wrong, it is recommended to scrap the entire algorithm from scratch.
Since the CCP cannot be switched to the required mode, it cannot be switched to the required mode.
Driver installation
Driver for KKT Atol Roztashovany at the address https://install.kontur.ru/atol 
After pressing the "Next" button, the user can select components to install or install them after installation:
Once the installation is completed, the computer must be restarted:
Now the driver is installed and ready for adjustment.
Adjusting the driver We need to open the dispatcher first Windows devices 
: "Start" - "Control Panel" - "Device Manager". 
Next, you need to expand the list item “Ports (COM and LTP)” and select “Serial port (COM)” (or “Device with serial interface (COM)”). 
Press the right mouse button on the menu in which you need to select the “Update driver” item: 
In the window, select “Look for drivers on your computer”: 
Then click “Select a driver from the list of driver installations”:
At the next stage you need to click the “Install from disk...” button: 
At the end it is necessary to indicate the route to the Atol driver. 
Please note: C:\Program Files (x86)\ATOL\Drivers8\USB_Drivers. 
Once the driver is selected, press the “OK” button: 
In the window that appears on the screen, you need to uncheck the box “Only crazy devices”:
Koristuvach go to the driver selection menu.
In the left column select "ATOL group", and in the right column - "ATOL FPrint USB":
After pressing the "Next" button, the system appears in advance - after pressing the "So" button: The system will install the driver, and if everything goes well, in the “Device Manager” section, under the “Ports (COM and LTP)” section, your name will appear:, which track should be launched under the administrator name.
In Notepad, you need to open the settings.ini file and correct the number = “number” row. You need to enter the number of the COM port used by the service. To find out, you need to check the data from the Atol registration utility and Device Manager.
The application has connections to port COM3, and the utility shows COM4.
You need to change these values in the settings.ini file and write it as shown in the little picture below: ATOL drivers are a special program that is necessary for the interaction between a cash register and a computer. Tse security software It is important to speed up the process of paying for a purchase, and to simplify the financial situation. Capabilities and functionality ATOL is necessary for any customer who has a minimal knowledge of working with cash registers to be able to successfully interact with it.
Finally, you will be able to support the fiscal apparatus by entering information about all expenditures and income into
special program
.
For robots with ATOL there is no need to create
- special profile or Vikonuvati additional adjustment
- – All ready-made configurations can be found in the menu.
- They need to be adjusted correctly.
- The settings will be automatically saved and updated in case of system failures.
- The program can detect the presence of a connected device, supports work with multiple cash registers connected to one computer, and can also work with remote cash registers connected to a PC through a network.
- When you manage a cash register, you can carry out sales transactions, pay, reverse, check or cancel a check, cancel medical bills, discard adjustments, withdraw various accounts, and withdraw money from others. y.
Crazyness
ATOL drivers are compatible with such fiscal registrars - ATOL, Shtrikh-M, Pilot, Iskra, MultiSoft, ServicePlus, IKC-Techno, NCR, Resonance, NPF Unisystem and Newton.
With programs that you can “get along with,” you can use the company’s products 1C, Microsoft Office, Microsoft Visual FoxPro/Basic/C++/C# and others.
Key features Supports Windows 7 and beyond (8.3.11.2867)
Business Accounting, edition 3.0 (3.0.54.20)
KKT Atol-FPrint-22PTK
Atol driver 8.15.3.8197
Installing 1C:Enterprise 8.3x64 in hopes of using DTO 8 from Atol, and deleting "Do not install on a stream computer. Type is not specified: AddIn.ATOL_KKM_1C82_54FZE":
I in 1C:Enterprise 8.3 Supports Windows 7 and beyond NOW THERE IS NO CASE.
Reinstalling 1C:Enterprise 8.3x32 does not help.
Only ZNOSIMO 1C:Enterprise 8.3x64 And without re-engaging, everything is working normally!
Rumors on the Internet yield nothing (surprisingly, 2017)
You have to live in bad manners. Exciting new drivers Road accident 10.1.1 after unpacking it was marked taka installer
, which includes the distribution kit KKT10-10.1.1.0-windows64-setup.exe (and KKT10-10.1.1.0-windows32-setup.exe). Launchable KKT10-10.1.1.0-windows64-setup.exe And for example, 1C: Enterprise 8.3 (8.3.11.2867) x64
The drivers are miraculously installed and the cash register works (the drivers appear as if they were 9).
If you run 1C 8.3x32, then the DTO 9 drivers will not work there. This is what is required - it is permissible that you also have Shtrikh-M FR vikorystvayutsya (only under 1C 8.3x32) works. It is necessary for everything to work at once - then we can understand 1C on x32.
We turn over the Atol driver for 1C x32. In parallel, KKT10-10.1.1.0-windows64-setup.exe will complete the installation KKT10-10.1.1.0-windows32-setup.exe
, then in 1s 8.3 x32 yak i DTO 9 and DTO 8 will not be processed. Cleaning the PC from Athol also helped. Why does the utility show Windows program
Atol is encrypted and write that it is Atol - for example, the KKT 10 driver....).
Be respectful. For example, I had DTO6, DTO8, DTO9, and DTO10 (installed twice). Another master of licenses.
Note: This article was written for KKT ATOL, which is consistent with Federal Law-54 (Online-kas). How do you have a cash register?
old model , then in steps 3 and 6 you will have one COM port, skip steps 11-13. 1. Install the ATOL driver as administrator.
Follow the installer's recommendations:
2. Connect the device via USB cable The device driver will display an ATOL icon:
7. Now we open “KKM Driver” (you can find it by searching on your computer) and press “Adjustment of authorities”:
8. Now select the item “Search for possession”:
9. In the search parameters, indicate the model of your cash register and press the search.
The driver must know the device, specify the speed of the robot and the COM port:
10. Next, in the connection parameters, you can indicate the same values as when you saw the driver at the previous point (we are looking for ownership), as well as indicate the model of your device and press verification of the connection.
If everything is set up correctly, your device will appear in the “Result” row:
12. Now we launch “Driver Management” as an administrator.
The KKM field contains sufficient information that the KKM means.
In the COM port field, enter the port number for exchange with the OFD (this is the other port that is displayed in your device manager, not specified in the POS printer driver). Check the Autorun checkbox and click the Run button: 13. Check the logs to ensure that the port is configured correctly. There is a record in the logs that the port is assigned correctly:
14. Now install the Subtotal program, following the installer instructions:
15. After launching the Subtotal program, open “Settings” and select the “KKM” section: