Golovna  /  Browser  /  You can trim the original seed. How to cut a SIM card for Micro or Nano? How to make nanocym from emergency

You can trim the original seed. How to cut a SIM card for Micro or Nano? How to make nanocym from emergency

Browser
18.02.2024

Trimming micro seed is very easy: all you need is a proper template, scissors and trimmers.

SIM consists of two parts - a plastic lining and a chip, on which all information about your number and contacts is stored. When cutting with your own hands, it is important not to damage the contacts of the chip, otherwise the whole job will be ruined. Also, an incorrectly cut SIM may not fit into the slot or may appear too small for the required size.

Most smartphones use mini-SIM, micro-SIM or nano-SIM. Most operators still issue universal cards that require verification independently. These have a collapsible body that folds out of the frame to cover the skin of the cards. To change a universal mini-sim to a micro-sim, all you have to do is “show” the card of the required size from the large frame. Before you remove your SIM, make sure you have a universal SIM card, so you can easily convert it to micro or nano.

How to cut a micro crop: template

If you have a special family, so you can’t just pick up the original frame, check out our template for cutting. The size of the micro SIM card is 15×12 mm. Cropping this card under a microscope will be much easier if you create size indicators on the back of the card (where there is no chip). However, for greater accuracy, we recommend that you copy the template from a paper.

This is how you can create a template for SIM trimming at home:

  • Take the corner of a thick paper, add additional seed and outline it. Turn the baby over so that the beveled mounds are right-handed at the bottom.
  • Step in from the left edge 1.85 (2) mm and draw a straight line, as shown on the smaller piece above.
  • It is necessary to extend 1.4 mm from the top edge and add another line - this will make it easier to remove the chip.
  • Using vikorist new lines, place a rectangular cutter the size of micro cm (15×12 mm), position the workpiece as it comes out.
  • Cut the upper left tuft of the orthocutaneous plant, extending 2.5 mm from the edge, as shown in the baby.

The template for cutting SIM is ready, just copy it from your paper. You can see the gluing a template at that of the MISTSI, you will be PIDRIZATIA card PID Mikro Zim, Ale Yakshcho Tricks the Brushadniti Clem Chip, just make a stencil to the sir with a thin tone of the aborter at the Miss Zriz.

Cut the new seed as best as possible with thin scissors. To remove any nicks on the plastic, brush the skin side with one stroke.

We cut SIM using a special cutter

If you need a micro SIM card, but you don’t understand how to crop a template or don’t want to waste time, there’s another way. On the Internet and in textile stores, they sell special cutters for SIM cards. They help you quickly and easily cut a card to the required micro or nano size. However, buying a cutter may be even less important if you often change your SIM. Moreover, the device is inexpensive and will last for a long time.

Try inserting a visa card into the slot of your smartphone. If you’re sitting next to someone like a glove, and the gadget can catch the edge without any problems, we let you know that the pruning was successful.

If you need to insert a cropped card into another slot, for example, back into a phone with a default SIM, check the standard frames that come with universal SIM cards. Do not try to glue the cut parts to the rolled card and, moreover, do not insert any third-party objects into the SIM slot. If you cropped the card incorrectly or sealed the contacts, just go to the next section of our statistics.

How much does it cost to replace a SIM card with an operator?

The easiest way to convert the primary camera to micro is not to download it yourself, but to contact the operator. Select the closest card shop to you, take your passport and old card and get a new one. Replacing the primary SIM with a micro SIM is absolutely cost-free. If you want money from you, feel free to call the operator’s hotline and ask for money.

As a rule, replacing a SIM card takes no more than 10 minutes. The retailer will need to enter your passport details to the database in order to be transferred to you as a client of the selected operator. After which you will be given a universal SIM card, with which you can get a micro or nano. Once you fold the old card, it will automatically become invalid. You can save it for the riddle or use it to create templates for cutting SIM.

Micro-SIM, apparently the operator, is definitely the best one. By trusting the replacement of your SIM card to professionals, you do not risk damaging your contacts when the card is cut or cut in the wrong shape.

You won't be able to request a new SIM right away - after all, you'll have to pay about 15 coins. Don’t worry, this is a simple procedure – it still takes a little bit of an hour to transfer the number to a new chip.

Before speaking, in addition to the well-known mini-SIM, micro-SIM and nano-SIM, there is an unprecedented SIM card format - eSIM. The new iPhone itself is a winner. We learned about eSIM in detail from.

Technology is changing every day, and today's phones are increasingly replacing older models. There is nothing bad about it, and even those who use it have the opportunity to use a wider range of functionality, which significantly improves the adhesive properties.

When buying a new phone, it is now often necessary to change the sim card format, and it is also important how many current devices transmit a different micro sim card.

As a rule, withdrawing SIM cards in a new format is not a problem today, and almost all mobile operators offer their subscribers a product that can be withdrawn by going to the center of the link.

To convert an old-format SIM card into a micro-SIM card, you need to use a special device, but it is not entirely possible to install it for a one-time use. You can remove micro-SIM from an obvious SIM card yourself. For this you only need a little bit of patience.

To transform a sim card using the simplest method, you only need a sharp knife and very little restraint in your hands.

Pokrokov's instructions:

  • The first stage of assigning a sample of the upper and lower parts of the symcarthy. The upper one decided to take care of that part, removing the bevels from the corners. When cutting a SIM card on both sides, it is necessary to orientate it at 12.3 mm. In this case, in the new format of the card, there may be an appearance of a beveled cut that needs to be done after cutting from the same side.
  • After this, you can start changing the width of the sim card. The plastic on both sides of the slide is cut in such a way that the result is a SIM card of a new format with a width of 8.8 mm.
  • For owners of even older SIM cards, during the cutting process, you can not be afraid to go a little beyond the boundaries of the contact square. As practice shows, the thread of this galus is not indicated on the image.
  • As a rule, in certain cases of change, your SIM card is enough for you to continue using a new phone. So, this is sold by Apple phone retailers, but not all other brands. If the SIM card is removed and does not “sit” with the lot’s destination, you will need to request a change in your account.
  • The thickness of the new SIM cards is measured at 0.67 mm, until any trace of bending occurs during the conversion of the old SIM card. You can create a thinner SIM card by sanding the emery paper or by rubbing the plastic base away from the contact area. In case of any emergency, you need to be very careful so as not to harm the rest.
  • By washing plastic from hardened emery paper, you will be able to remove the card of necessary items. If you decided to opt for another method, then the cost of the stolen sim card will turn out to be much less for the necessary parameters. In this case, in order for the seed to sit firmly in the lot, you need to place a small piece of paper under it.

The simplest method for trimming an old simcard is to transfer the vicor of the uncut template. In this case, there is no need to adjust the width and height to the nearest millimeter from the fixed line.

The physical equipment consists of:

  • standard SIM card;
  • Printer;
  • arkush paper in A4 format;
  • double-sided tape or glue;
  • olive;
  • rulers;
  • knife;
  • emery paper.

On the A4 frame with the scale set to 100%, it is necessary to separate the application template. After finishing the template, you need to carefully glue the old SIM card with cured glue or tape. It is very important to respect the dimensions of the old family. So, to cut standard format SIM cards, use the middle template. In order to work with MicroSIM, you need to follow the template below with a signature.

When the card is placed, the trace is oriented in the direction of the cut cut. After the glue has dried, you need to crosscut the lines for cutting, following the parameters of the template. After this, separate the template from the sim card, and cut the rest behind the painted lines. With this method, it is easier to use thin manicure knives.

As stated, during the process of cutting the original SIM card, you may be afraid of scratching the contact area. And when working with a MicroSIM, cutting contacts is not recommended, even if it appears on the robot card.

You can adjust the thickness of the car, as in the previous method, using an emery paper or separating the back part. It is important to note the fact that the thickness may have been changed by 0.09 mm.

The process of circumcising the cardia is a delicate procedure, so the result of incorrect actions can result in permanent damage to functioning. If you are not concerned about the hand-holding and strongly doubt the successful completion of all actions, it is more likely to be possible to independently transform an obvious sim card into a new format.

It is important that most of today's smartphones, especially ultra-thin ones, only work with other Nano-SIM cards through those that are a little thinner than their standard “brothers” Micro- and Mini-SIM. Regardless of the difference in size, their chip is absolutely new. In addition, as required, you can cut a SIM card for Nano SIM yourself. There are plenty of salons that sell crops for a pittance. If you are afraid to earn money yourself, you can quickly get help from their services.

Before the speech, the rest of the time, communication operators began to work on SIM transformers:

Koristuvachev is unable to simply choose the size that you need. In addition, you can change the size of the card, and then enlarge it.

So, how can you cut a SIM card for a Nano SIM and not zip it in front of anyone? I will give you two options.

Template for Nano SIM card

I present to you two templates for Nano-Sim that you need to enchant, cut into an A4 frame and then follow the instructions. For the job, you will need good sharp knives, a sharp knife or metal scalpel, a nail file, and a plastic or wooden board.
Respect! The templates below allow you to create a Nano-SIM either as a standard or as a Micro-SIM.
Template 1- Vantage
Check the required size and stick it on your SIM card. If you need to crop it for the Nano-Sim card. Sharp or crooked edges can be trimmed using a nail file. Golovna - do not damage the chip.

Template 2- Vantage
This template for cutting, in addition to the cutting tool, also requires a sheet of paper and a ruler. Unfold the A4 size template and place your SIM card on it. Using a ruler, place the lines behind the template:

After this, you can cut the SIM card under the Nano-SIM behind the contour. Golovne - don’t chop the chip!
Finish edges or crooked edges with a file.
After this, you can insert the Nano-SIM into your phone and check it for the robot. Good luck to everyone!

Nowadays, on many modern gadgets you can use an alternative version of the standard SIM card – micro sim. This is due to the testing of manufacturing technology to save the internal space of the device in order to more compactly accommodate other elements and make our phones and tablets smaller, thinner, lighter and cheaper in the end pouch than the manufacturers nothing, none of their predecessors.

Having bought a new phone or tablet (for example, Samsung, HTC, iPhone or iPad), you may find that the standard SIM card is no longer suitable, and if you want to use your regular SIM card after purchasing a new device, it can be cut off. The main chip is replaced in place, changing the size of the plastic base. It’s not easy to create a micro SIM card at home; all you need is a sharp manicure scissors, a sharpening pencil, a ruler, a paper sandpaper (or a nail file) and a little bit of terp.

The primary seed is a plastic rectangular cutter with a chip, which has parameters of 25x15 mm. The dimensions of the micro SIM card are 15x12 mm. You can trim the original seed to the required size like this:

If the SIM card, after changing the dimensions, will be larger, it is not necessary to resize it, but if the size is much smaller, the SIM card will become impossible to use and will have to be changed. on new.

If you are afraid of zipping up your SIM card or simply fiddling around, you can replace the standard SIM card with a card of the required size in any Beeline office. Upon presentation of the passport, the subscriber will be presented with a new SIM card, or the old SIM card will be trimmed to micro SIM format, a device called a stapler. Take at least an hour.

There is a possible reverse situation - the use of micro-SIM cards in devices with standard slots. Why would you need a special adapter for micro SIM cards, which you can buy at any store? Thus, your micro SIM card will become universal for most devices.

Today's smartphones have recently become popularized by a new standard for the SIM card format - nano sim. The most prominent representatives that support such cameras are the new Apple iPhone models and Samsung phones. In connection with this situation, many subscribers of Vinikla need to cut down the original SIM card to the size of a nano SIM, since it is simply impossible to insert a standard one into today’s phones.

How to trim seed under nano-sim?


You can change your size to nano sizes either on your own or by entrusting the work to the facists. If you decide to cut a SIM card at home, prepare the following materials that you will need during the process:

  • Stationery knife or sharp knives.
  • Handle or olive.
  • Caliper or ruler.
  • Emery paper or nail file.

In order to verify your original nano sim SIM card, follow the following procedure:

  1. Using a pen or painter, apply the dimensions of your new SIM card to the surface of the old SIM card. The required dimensions of a nano SIM card are 12.3 by 8.8 millimeters. It is necessary to apply the markings as accurately as possible - this can be assisted by a caliper and a ruler with a fractional scale. You can also unzip it on paper and transfer it to your original SIM card.
  2. With the help of a stationery knife or a knife, cut the edges of the plastic, applying it to the robot as carefully as possible, without sealing the electronic chip.
  3. Take an emery paper, smooth the edges and grind the plastic ball off the top side of the paper. It is necessary to set it to 0.67 mm. Every time you don’t think of sanding a chip, it will inevitably lead to a malfunction.

Before you cut a SIM card to the size of a nano SIM, keep in mind that in people's minds you can damage the SIM card and get rid of it. For those whose SIM card does not support renewal, you will have to buy a new one. To reduce risks, it is recommended to start training on an old, unneeded seed and only after switching over to trim your seed.

Alternative ways to cut a SIM card

It is not difficult to cut a SIM card by hand, it can be replaced with a card of the required size, or the original cut can be applied using a special cutter. This tool is a kind of cutter or stapler, in which the original SIM card is placed and in one press it is carefully cut into a micro or nano-SIM. Similar tools are available in mobile communication stores, one of which can be used to replace the SIM card with a nano-sized card. You can also replace the card without cutting it - you need to fill out a request at your operator's contact office and select a new set of cards of the size you need.

You can insert a nano SIM into your phone from a standard size SIM card slot using a special adapter for nano SIM cards. You need to place the nano-SIM in the adapter, which, in turn, is inserted into the socket of the mobile phone. It costs a lot of money, and the value is already obvious - you don’t need to change your SIM card again in the near future if you want to use a different format on your phone.