It often happens that there are two computers in a cubicle and it is necessary to exchange a lot of information between them. Since such an exchange occurs rarely with a small number of files, it is logical to use a flash drive. Otherwise, it’s better to create a homemade measure. It allows you to exchange data between devices with great speed, between these boundaries. Let's find out how handy homework is.
Using a flash drive is not so much easier: files are copied extensively, and through memory sharing you have to constantly move and download new files, which takes up to an hour. Let's take a look at connecting two computers through a home group. For this purpose, you need to install a router in your home before connecting the computer to an additional cable or Wi-Fi connection. To connect two devices to exchange information, you need to create a home group on one device. The computer on which it was created is the main computer of the project. Another device, which is a child of the master, must simply be connected to this group.
What steps need to be taken in order to make a connection:
- On the right side of the panel, go to the desktop, where there are system icons, you can find the image of the monitor, by clicking on it with the right mouse button, selecting “Measurement Management Center”.
- In the window that appears, you can see the item "Home group". New Year's Eve
Click on the “Create a home group” button and in the section, click “distance”.
- Now you have to choose which folders will be open to other networking devices. When everything is ready, stamp “dali”.
- Now you can ask us to guess the password for access to the group and write it down in the text field provided. Thus, only those who know the password can access the home network, and no one else can connect to it. In case you forget your password, it’s best to write it down on your paper.
- Click on the “ready” button to complete the procedure.
Home construction, step-by-step adjustments in pictures
Home computer network. Complete
Now, if you know the password, you can connect to a group with any device in the area.
What you need to do to connect to a wired computer:
- Open the “Margin Management Center”, and then a window with a “Join” button will appear.
- Next, select those resources that you are ready to provide access to the host computer.
- The next window will have a different password, which will be the entry for the created home group, and it will be stamped “distant”. Everything is installed. Now you need to set up secure access to folders and drives:
- Select the required folder or drive, right-click on the folder, drive, or file, and select the “power” section.
- In the new window, select the “access” item and click on the “Advanced settings” section.
- In settings, the item “Enable private access to this folder” is selected and “OK” is stamped. Now the disk is accessible to the group and various operations can be carried out on it: copying files and folders, browsing, etc.
Now, in order to work with folders and files on the host computer, you need to open the network on the child computer and find the folders that are allowed to be accessed on the host computer. These files can be copied to a child computer, from a child computer to the parent computer, or transferred by the operating system. The situation of lack of connection may be resolved if properly adjusted. The reason may be an antivirus that does not allow connection with other computers. In order to open the connection, you must turn on the antivirus for an hour of work in your home group.
First of all, you must understand that in different minds different types of connections can arise. And your choice is based on the specifically assigned task.
For example, connect small cross-cuts up to 2.5 mm in a compact junction box, using stronger terminal blocks or clamps. And if you talk about a strobe or a cable channel, then the sleeves come out right away.
Let's take a look at the three simplest and most reliable types.
Let's finish with the connection to type ZIZ. It is deciphered as follows:
- Z united
- І ash
- Z pressure
It looks like a simple bucket. Available in different colors. 
Moreover, the color of the skin means the continuity to specific cuts of the veins.
In this bag, the veins are inserted and twisted together. 
How to do it correctly, first twist the rope and then tighten the cap, or twist them directly with the ZIZ itself, according to the article “.” 
As a result, you will always end up with a good old twist, just as soon as it is stolen and insulated.
Moreover, with a spring contact, which prevents it from weakening. 
In addition, this process can be easily automated by placing the screwdriver attachment under the SIZ. This is also revealed in the guidance of more statistics. 
The offensive species is Wago. They also come in different sizes, and there are different numbers of wires that are connected - two, three, five, everything.
They can be used to stick together either monoliths or large numbers of arrows.
Moreover, it can be implemented both in different types of Vago and in one single one. 
For those who have a lot of tension, the clamp has an ensign clamp, which in the open position easily allows you to insert a wire and squeeze it in the middle after the clamp. 
These terminal blocks at the home wiring, following the request of the distributor, calmly vitrify the voltage up to 24A (light, sockets).
There are several compact copies available for 32A-41A. 
The axle of the most popular types of Wago clamps, their marking, characteristics and which type of tires are insured:
Series 2273 Series 221-222 Series 243 Series 773 Series 224
Another industrial series for cable sizes up to 95mm2. Their clamps are really great, but the principle of work is practically the same as that of small ones. 
If you measure the pressure on such pressure, with a flow value greater than 200A, and in this case, that nothing burns or heats up, many people have doubts about Wago products.
Yakshcho you have a lacrimal, and not Chinese, and not the sinker, I, at the Tsom Linіya, is borrowed by the automatic sulfur with the right charter, the same species of the right to name the names of the found, the visible to the installation in the installation.
Destroy the idea from the wrong minds and the result will be completely natural. 
Therefore, there is no need to set the wago to 24A and, if so, to protect such wiring automatically to 25A. The contact will win once you re-vantage it.
First of all, choose the right terminal blocks for your car.
Automatic machines, as a rule, already stand in your place, and steal the stench into the first place of the electrical wiring, and not the vantage and the end of the companion.
You can also use the old type of connection with terminal blocks. ЗВІ – clamping screw insulation.
At first glance, it looks like a simple screw connection of wires to each other. Again, it occurs under different cuts and different forms.
Axle technical characteristics (string, beam, dimensions, screw torque): 
However, there are a number of significant shortcomings that cannot be called distant and reliable connections.
Basically, in this way you can combine only two darts one by one. It is imperative not to choose large blocks and not to put a bunch of veins in there. It is not recommended to be timid. 
Such screw connections are well suited for single wires, but the axle is not suitable for high-tension wires.
For cable wires, you will have to pre-fit them with NSHVI lugs and incur additional costs. 
Here you can find videos of how the experiment measures transition supports on different types of connections with a microohmmeter.
It’s amazing how it’s the least important thing to come out from the gwent’s clutches.
But don’t forget that this experiment concerns “new contacts”. And try to create such vimirs yourself through one river or two intensive uses. The results will be completely different.
Connection of copper and aluminum
The situation most often breaks down when it is necessary to connect the copper conductor with aluminum. Since the chemical properties of copper and aluminum are different, direct contact between them with access to acid leads to oxidation. It’s not uncommon to make personal contacts on automatic Wimikachas like this. 
The oxide melt settles, the support increases, and heating occurs. Here it is recommended to use 3 options in order to be unique:
They are caused by direct contact between aluminum and media. The bond is forced through the steel.
The contacts are separated from each other at adjacent centers, plus the paste prevents exposure to air and prevents the oxidation process from developing.
The third simple method is to connect the conductors by pressing them with sleeves.
To seal copper darts, it is most common to seal the GML sleeves. Deciphered as:
- G use
- M poisonous
- L married
To connect pure aluminum – HA (aluminum sleeve):
To switch from copper to aluminum, special GAM transition adapters:
What is a method of pressing? Everything is easy to complete. Take two conductors and clean the necessary area.
After this, the conductors are inserted in the middle from the skin side of the sleeve, and the whole area on the right is pressed with pressure pliers. 
Despite the obvious simplicity, there are a lot of rules and nuances in this procedure, but if you don’t add any details, you can easily make what would seem to be a reliable contact. Read about these benefits and rules and how to avoid them in the articles “” and “”.
To work with conductors of large overcuts 35m2-240mm2, a hydraulic press is used. 
Up to overcuts of 35 mm2 it is possible to cut mechanically and mechanically with a large span of handles. 
The sleeve needs to be pressed two to four times, carefully before cutting the end of the tube. 
The most important thing in this case is to correctly select the size of the sleeve.
For example, when connecting monocores, consider taking the sleeve to the size of the smaller cut.
And in this way you can connect a number of conductors at one point at a time. In this case, one cartridge will be removed. 
The head will completely fill the internal space. If you squeeze three conductors at the same time, and you are left empty in the middle, then you need to “fill” this large space with additional pieces of the same size, or with conductors of a smaller size.
The cable connection is one of the most universal and reliable connections, especially when it is necessary to extend the cable, including the input one.
Insulation, in this case, turns out to be practically equal to the main one, with the exception of the outer tube HERE as a casing.
Insanely neither SIZ, nor Wago, you will not be victorious for these purposes, and the GML liner axle is just right! Thus, everything comes out compact and can be easily changed in the groove, in the cable channel.
Zvaryuvannya and soldering
In addition to all the most common methods of connection, there are two more types that electricians rightfully regard as the most advanced.
And you can never help but connect an aluminum mono-core wire with a heavy-duty copper wire. In addition, you are once again tied to an outlet or a harness.
What if there is no voltage or generator nearby? 
In this case, elementary pressure clamps are present, in 90% of electrical installers. It’s not a burden for anyone to buy the most expensive and fancy stuff. 
For example, battery-powered. Manually, immediately, walk and just press the button.
Their Chinese brothers and sisters are also doing a good job of coping with their duties. Moreover, the whole process takes a little more than 1 hour.
Electrical engineering is not a field that needs to be covered. Everything must be done carefully, materials must be selected carefully, and the choice of sizes/diameters/nominals is important. It is clear from this that the guides need to be guided correctly. And choosing ways to connect wires is not nearly as easy as it sounds.
There are about a dozen ways to connect darts. By the way, they can be divided into two groups: those that require special skills or specific skills and those that can be successfully used by any home master - the stench of these special skills does not stand out.
To the first group lie:
- Payannya. When connecting wires of small diameter in a quantity of 2-3 pieces, this is a very reliable method. True, you will need to have a soldering iron and some experience with it.
- Zvaryuvannya. A welding apparatus and special electrodes are required. Prote contact turns out to be reliable - the conductors are fused into a monolith.
- Pressed with cartridges. Required sleeves and special pliers. Giles are selected for the singing rules, as they need to know. It’s better to connect, if you want to re-earn, you’ll have to cut it off.
All these methods of connecting wires are determined mainly by the fakhivs. If you are familiar with using a soldering iron or a welding machine, after practicing on unnecessary scraps, you can create them yourself.
Some methods of connecting wires are more popular, others less
Methods of connecting wires that do not require any specific wiring are becoming increasingly popular. Their advantage is quick installation, reliable connection. Not much - the required “connectors” - terminal blocks, clamps, bolts. They cost a decent penny (Wago terminal blocks, for example), but there is an inexpensive option - screw terminal blocks.
So the axis of the method of connecting wires, which is distinguished by the simplicity of the connection:
Among professionals there are two protracted thoughts. Some people believe that new methods of connecting wires - clamping - are the best way out, because they speed up installation without harming the connection. Another thing to talk about is that the springs weaken and the contact becomes loose. Whose nutritional choice is yours.
Technical nuances of different types of wire connections
All descriptions of the most common types of wire connections are determined during the installation of electrical wiring, and the specific type is selected based on several characteristics:
Let's take a look at the method of skin connection, the technology of its development and its usefulness in different situations.
Soldering electrical wires
One of the oldest and most extensive types of connection. To work, you will need rosin, solder and a soldering iron. The soldering process is like this:
Vlasna, the soldering of electric darts is now complete. The process is not very complicated but will require some singing skills. Head - open the connection area sufficiently so that the solder flows between all the wires. In this case, it is not possible to overheat, otherwise the insulation will melt. The axis of this is the mystery - not to burn the insulation, but to ensure reliable contact.
When is it possible for Vikorists to do soldering? This method of connecting wires works well in low-current electricity. When the wires are connected, the connector box is not very strong. Especially when wires have a lot of stench and/or a large diameter. Soldering this kind of twisting is not a task for beginners. In addition, when you try to place a connection in a separate box, the soldering begins to fail. So much so that tens of dollars are worthless. This method is good when connecting conductors of small diameters.
Welding of conductors in electrical connections
One of the most reliable ways to connect wires is welding. During this process, the metal surrounding the conductors is brought to the melting point, mixed, and then left as a monolith. A very good method works on large diameters or with a large number of conductors to connect. It is damaged not just by an exchangeable contact, which does not weaken or change its characteristics over time. It is also mechanically even more powerful - the fused part does not allow the joint to fall apart for great achievements.
Drops at the end of twisting - melting of aluminum
Not many people either. The first is the very ones that conductors are fused so that the connection is completely inseparable. If you need to re-work it, you have to remove the fused part and start everything anew. In order to be able to do this, you will need to pay off a small backlog after the last wires. Another drawback is the necessary welding apparatus, skills for operating it, special electrodes for welding aluminum or copper. The firebrand in this case cannot burn the insulation, but rather melt the conductors. Before they can be made, they are cleaned with insulation about 10 cm, tightly twisted at the rope, and then boiled at the very end.
Another step is welding the wires - a laborious process that also requires jeweler's precision from those operating the welding machine. Due to the totality of these features, many professional electricians do not like this method. If you draw the wiring for yourself and manage the equipment, you can spend up to an hour. Just practice on scraps beforehand to pick up the strength of the stream and cook it. Only after you have everything perfect as many times as you can, you can begin to conduct the wires “in real life.”
Opresuvannya
Another method that requires special equipment is pressing the wires with sleeves. The sleeves are copper and aluminum, of different diameters. The material should be selected according to the material of the conductor, and the size should be selected based on the diameter and number of wires for a particular connection. They may fill the entire space in the middle of the liner, but in this case they may lose space. Depending on the correct choice of the size of the sleeve, there must be good contact resistance. This is due to the main complexity of this method of connecting the wires: the sleeve may be too large and too small.
The robot technology is as follows:
- The conductors are cleaned for insulation (dead of the cleaned section - a little more per dove of the sleeve).
- The leather conductor is cleaned to bare metal (the oxide is removed with a fine-grain emery paper).
- The wire is twisted and inserted into the sleeve.
- They are squeezed with special pliers.
First of all, it’s awkward, but the selection of the sleeves and the obviousness of the ticks are all complicated. You can, of course, try pressing it with pliers or pliers. It is simply impossible to guarantee normal contact.
Twist
In the first section, we completely removed the twisting of the wires. This standard cannot be followed as it will not ensure proper contact and reliable connection. This method can be replaced by other methods of connecting wires.
So, on the twists they worked on the wiring for 20-30 years and everything worked well. And what kind of things were necessary at the edge, and what kind of infection... Today, the number of technologies in your home or private cabin has increased significantly and the number of technologies that generate electricity. These types of activities simply cannot be performed when there is a decrease in stress.
Why is this filthy twisting? The darts twisted into a rope do not allow sufficient contact. Everything is fine initially, but then the metal becomes coated with oxide melt, which means the contact is damaged. If there is insufficient contact, the joint begins to heat up, the increase in temperature causes the active creation of oxide melt, which further damages the contact. At any moment of twisting, the heat becomes very high, which can lead to burning. For these reasons alone, it is better to choose some other method. And what can be done even faster and easier, and what is more reliable.
Isolation connection
All described methods of connecting wires - welding, soldering, pressing with a sleeve - transfer their insulation, since the exposed wires must be protected. For these purposes, insulating tape or heat-saving tubes are used.
You know how to use duct tape, and you know a little about heat-saving tubes. This empty tube is made of polymer, which, at elevated temperatures, significantly changes its diameter (in 2-6 times, depending on the type). The size is selected so that the shrinkage volume is greater than the diameter of the insulated wires, and the post-shrinkage volume is less. This type will ensure a stronger adhesion to the polymer, which guarantees a high level of insulation.
Thermal tubes for insulating conductors can be of different diameters and colors.
The size of the heat-burning tubes is selected based on special characteristics. The stench roars:
- heat resistant;
- light-stabilized (for use in open air);
- oil-petrol resistant;
- resistant to chemical substances.
The cost of heat-burning tubes is not very high - from $0.5 to $0.75 per 1 meter. This dowry requires a little more than half the dowry of the exposed conductors - so that one edge of the tube is stretched over the insulation of the conductors by approximately 0.5 cm, and the other is washed by 0.5-1 cm. After the tube is tensioned, take a heater (you can use the igniter) and light the tube. The heating temperature may vary – from 60°C to +120°C. After the connection is tightened, the heat is applied, after which the polymer quickly cools down.
Insulating wires with a heat-insulating tube does not take much time - it takes only seconds - and the insulation capacity is high. Sometimes, for greater reliability, two tubes can be combined—one of a smaller diameter and one of a larger diameter. In this case, the kidney is stretched and one tube is warmed up, then the other. Such devices can be used near water.
Terminal blocks
This method is also respected for being better than electricians, but you can easily defeat a human being, who can get the original twist in his hands. This is one of the first ways to connect electrical wires without soldering. Today, on each electrical device, you can get a connection option - an output block, to which the power cord is connected.
The terminal block has a contact plate, which is sealed in a plastic (polymer) or carbolite housing. There's not a lot of stench, even in any store that sells electrical goods.
Terminal blocks are hand-made, inexpensive, allow you to connect copper and aluminum particles, conductors of different diameters, and the same richness.
The connection is completed literally in a second. The insulation is removed from the conductor (approximately 0.5-0.7 cm), and the oxide melt is visible. Two conductors are inserted into the socket - one opposite the other - and secured with bolts. These bolts press the metal to the contact plate, ensuring a secure connection.
The usefulness of this method of connection: you can connect strands of different cuts, single-core with rich-core. Not enough - only a couple of wires are connected. To connect three or more, it is necessary to install jumpers.
Kovpachki ZIZ
Another way to connect wires that does not require special skills is to install ZIZ connectors. It has a plastic cone-like body, with a spring sealed in the middle. There are stinks of different sizes - from 0 to 5. You can connect particles of different diameters - on the skin packaging there are written minimum and maximum and minimum total cross-cut of wires to be connected. In addition, the housings are simply cone-shaped, with stops “lugs”, which make their installation easier. When choosing, be respectful of the plasticity - you are not guilty of screwing up.
It’s very easy to collect the darts using the following three: peel off the insulation, collect the darts into a bunch, insert the scoop in the middle and start twisting. The spring in the middle of the cup traps the conductors, helping to twist them. The result is twisting, as if the spring is wrapped around the outer side. Then the contact will be very clear and kind. This method of connecting wires with ZIZ bundles has been established for a long time in Europe and America; it came to us about 10 years ago.
If you need ways to connect wires without welding - take a look at ZIZ
Another way: twist the ends of the darts, then put cups on them. This method was invented by the Russian campaign, which generates connections for wires - KZT. However, this method will require more than an hour, and after a while you won’t need to worry about anything.
And one more thing: how to clean the dart before isolating it. The transmitters from this drive give clear indentations - under the skin there is a supply of bare conductors. The tank is insured so that all conductors without insulation are stuck in the middle of the body. This way, the connection does not require additional insulation, which greatly speeds up the process. In addition, the expanded lower part does not exceed the heat transfer and thus heats up less.
Practicing electricians recommend stripping the darts by 5-10 cm, and insulating the twist that has been lost without insulation. We argue that the contact area with this option is greater. That's right, but this option is hotter. And the staff has a reliable solution. There are problems with contact (with normal luminosity).
Zatiskachi Wago
The most baked superchki flared up just as soon as Vago. This product is absolutely suitable for some, but not for others. Moreover, it is not less categorically. Opponents of the Wago wicket do not like those whose contact is based on a spring. It stinks to talk about those that can weaken. This will lead to contact damage and overheating. I take photos from the melting clamps. Adherents of this method of conducting tests and leveling, talk about those who correctly select the firm seal to serve many risks without any sign of loss of contact. The same distributors talk about those that, with advanced technology, Wago terminal blocks can be used for 25-35 years. It is important to choose the right type and parameters and buy a subset (there are plenty of them).
There are two types of Vago clamps. The first series of a little less road is called Wago. Suitable for clamping for connecting single-core and multi-core wires with a cross-section of 0.5-4 mm2. For conductors of smaller and larger cuts there is another series of Cage Clamp. There is a very wide range of vicoristics - 0.08-35 mm2, but there is great variety. In any case, contact is ensured with a contact plate made of hydrated copper. The special shape of the plate allows for reliable contact.
Roz'emni
In addition, Vago spring clamps are removable (222 series) and non-removable (773 and 273 series). The switches are manually placed in these places, where it is possible to change the configuration of the circuit. For example, in separate boxes. The stench is more important than that with which the darts are squeezed or fluttered. Various Wago terminal blocks can connect 2 to 5 conductors. Moreover, the stench can be of different types (single-core and multi-core). The order of connecting the wires is as follows:
The same operation is repeated with the other wire(s). Everything takes just a few seconds. It’s really cool and handy. It’s not surprising that many professional electricians have forgotten other ways of connecting wires.
Neroz'emni
Non-removable series are divided into household ones: a clamp body and a cup. The cup can be made from transparent polymer (773 series) or from non-transparent plastic (223). The body has an opening through which the insulated dart can be inserted.
To ensure normal contact, you need to properly remove the insulation itself by 12-13 mm. The vibrator itself exhibits the same effect. After that, as a conductor of inserts, its bare part must be in the terminal block, and the insulation must press into the body. For such minds, contact will be reliable.
Bolt connection
Another type of connection of electrical wires with considerable experience is bolting. It is so called because a bolt, nut and a number of washers are used to connect wires. Contact for the shell of the vikoristan washers comes out of trouble, but the entire structure takes up a lot of space and is not easy to install. It is important to consider the need to connect conductors made of different metals - aluminum and copper.
The order of collection is as follows:
- We clean the darts from insulation.
- From the cleaned part we form a loop, the diameter of which is equal to the diameter of the bolt.
- The bolt is pressed in this order
- washer (this one rests on the head of the bolt);
- one of the conductors;
- another puck;
- another conductor;
- third puck;
- We tighten everything with a nut.
So you can combine not just two, but three, and more darts. Please note that you don't need to use your hands to tighten the nut. It is necessary to change the nut wrenches and report solid forces.
The best ways to connect wires for different voltages
Since different darts can be combined, stench can be used in different minds, then the optimal method requires selecting all the necessary nuances. Let's look at the situations that most often arise:
These are the widest options for non-standard connections.
I would like to recite your article about those how to connect two computers together using twisted pair cables (technology Ethernet) with vikoristanna operating systemWindows 7. This pair offers reliability, low cost, and ensures high speed data transfer between computers.
If you have two or more computers at home (or a computer and a laptop), then, in my opinion, it is necessary to combine them in moderation. You are a victor on the Internet. Please note that your Internet is unlimited. The Internet is unstable at times, a local edge with a twisted pair has far fewer failures, and you can also use up Internet traffic because you sometimes need to exchange information (or play games) between the same room, home...
I have already seen information about those that I recommend reading that article from the beginning, and then turning to this one. Let me explain why.
Today we will look at only software aspects of setting up a network in the core operating system Windows 7. In the article about adjusting the circuit in Windows XP, I looked at all the inputs to this process: from the adjustment of the connection between the nodes and the compression of pair torsions to the connection of RG 45 plugs in the sockets on the edge maps. In addition, there you can find information about those What are IP addresses? and a lot more with this.
We turn around without the middle to the Vikonannya Zavedannya connecting two computers using the Windows 7 operating system.
Let's look at this process step by step:
Stage 1. We first need to enable “Remote access and network detection” on both computers that are connected to the local network.
To do this, open the Start menu and go to the Internet Panel. Let's go for the address:
Internet Panel" > "Meterings and Internet" > "Center for Internet and Internet Access" > "Change add. parameters for behind-the-scenes access".
Fig. 1. Parameters of extragal access
At the window that opens, you need to mark the following points:
- Merezheve appearance;
- External access to files;
- External access to all folders;
Stage 2. Set the computer name and work group.
Press the Win + Pause keys (there is information about others on the site).
The “System Power” window opens. Go to the “Computer Name” tab and click on the “Change” button. The window “Change computer name” has opened. register the necessary computer name(be it to your taste) i work group name. In operating systems, the name of the workgroup is listed as WORKGROUP. You can deprive him. For example, I created a working group under the name HOME NETWORK and bringing it to the computer Home PC 1.
Figure 2. Call a computer and create a work group
Click on the Ok button. The system will provide information about the need to re-upload. We'll wait. The process of combining two computers can be continued after rebooting.
Stage 3 . Assigning an IP address to computers.
For whom let's go to the address:
Start > Internet Panel > Networking and Internet > Networking Center with Networking and Shared Access.
Open “Local Wire Connection Power” and select “Internet Protocol Version 4 (TCP/IPv 4)
Figure 3. Connections via local network: power.
Then press the “Power” button and in the “Power: Internet Protocol version 4” window, select the item “Victory the IP address”. Specify the IP address
Note. IP addresses (Internet Protocol Address, IP) - node address measure (computer or other unit) of a computer network using the IP protocol. IP addresses are a 32-bit double number. The basic form of recording an IP address is a number of tens (from 0 to 255), separated by dots, for example, 192.168.0.1. It is important that for local networks the range of IP address 192.168.X.X (X=0-255) has been entered.
Click in the “Submersion Mask” field and this parameter (Submersion Mask) will be installed automatically.
Figure 4. Authority: Internet Protocol version 4
For another computer, you need to specify the same work group, or a different name and IP address.
Stage 4. If similar operations are carried out with another computer, you must check which connections are being performed in between.
To do this, press the Win + R key and enter the command in the “Windows” window cmd.exe. The Windows command interpreter will be launched.
Due to the need to combine the darts, the home master practically skins. Before making repairs, carrying out new wiring or simply connecting a new device, it is necessary to complete similar actions. The stench is striking in scale and complexity.
On the road until the end of the day, electric lines loom in abundance. In these places they install connections for darts. There are many types of them. An electrician should know how to correctly select and assemble such elements of electrical wiring before starting work.
Evolution united
Previously, electricians had no power supply. And therefore, a single technology for all was stagnated. The wires were stripped, twisted between baking soda and wrapped with electrical tape.
Previously, the wiring in the booths was wired. Today, the middle life is simply necessary for gentrification. Over the past decade, new, powerful technology has appeared in our cubicles and apartments. When it is frozen, a clear connection is required.
According to experts, faults most often arise in places where wires are connected. Twisted conductors begin to heat up when the voltage is moved. The electrical tape dries out over time. There is a great danger of a short pause here. To avoid any guilt, it is necessary to put together special gathering darts. Vidi The specific features of the storage of such viruses will be discussed further.
Wiring rules
In order to understand how to properly connect wires in any case, it is necessary to consider the rules for the installation of electrical installations. It is clearly stated which methods are suitable for the modernization of current communication systems. Looking at rules for connecting wires, You can learn more about the unpleasantness of twisted twists. The regulatory documentation clearly states that everything can be joined together by welding, pressing, squeezing and soldering.
The wiring must be connected to the cable with the copper core. In order for such a measure to be low, high indicators of reliability must be kept as low as possible. Peretin lived to rob apparently up to the sum of the transfer of vantage. The more equipment is connected to the circuit, the more conductor will need to be connected to the system.
Kovpachki
Looking at how to bring the javelins together, non-professional craftsmen are still concerned about stressing the wires. It is pleasant to carry out local repairs of wiring or connections to a low-pressure device to cut the booth. The Meister can in this case further refine such a stick alive.
To ensure greater reliability, use special cups. They are used instead of duct tape. They are also called (ЗІЗ).
A safer option is to use electrical tape. It looks like a plastic bottle. Built into it. She squeezes the contacts and ensures reliable contact. Acid presses have a special lubricant that prevents oxidation processes. When choosing, it is necessary to select the type of wire you choose (multi-core or single-core). Also, evaluate the cross-cut of the conductor for any purpose. It is not difficult to connect cores made of different materials.
Clemie
Most often cable connection Today it looks like a mess. They are made from brass. At which end of the cable that is connected, do not contact each other directly. Therefore, with the help of such constructions, however, it is possible to connect new conductors, made of different sizes, made from different materials.
In order to be able to create the correct connection, you need to select different types of terminals. The stinks are determined by the nominal indicator of the strum, as well as the permissible diameter for the dart. All characteristics of the terminals are indicated on the original housing.
Acts presented in the sale of signs may have a special appearance. The gel prevents oxidation processes, increasing the reliability of the connection. There are knife, spring, and screw clamps.
Spring varieties
The spring type is used for both simple and folding circuits. For several pairs of wires, a special block modification is prepared.
Fixation occurs as a result of straightening the spring mechanism. This fastening is respected by one of the most important. The storage of such a mechanism requires special oil. It is affected by the advanced materials that are formed at the fastening. This is not a gel, but an oily material with a foamy consistency.
When preparing the type of production, the producers indicate the scope of stagnation of such products. Clippers are available for heavy-duty items and it is necessary to take care when choosing. In most cases, different types of fastenings are used to straighten the zero and phase.
Knife clips
Today there will be another one Electrical rose. Yogo is called a knife cleaver. Tse nadіyne, mіtsne с'єдння. These clamps are easy to install and use. The wires for this type are connected behind a special special conductor plate. When vikonanny is pressed into the darts, this structural element cuts the braiding around the vein. Therefore, when viconning such a joint, there is no need to clear it.
Due to their characteristics, different types of terminals are considered reliable and useful. At the time of installation, the master is obliged to stiffen the zusilla in order to properly fix the ends of the conductors. This is respected as the norm. To squeeze the inode, you need to tighten the pliers.
Presentations of different types of terminal sockets are carried out for non-removable and plug-in connection types. In the first option, the master must carefully think through all aspects of the organization of electrical circuits. This process is carried out on the surface of the assembly robots.
Mixing of various materials
Apparently, the current conductor has two types of conductors. Before the first category they lived from the middle, and before the other - from aluminum. For fire safety rules, it is recommended to give preference to the first option. However, in certain situations, the master has to pull out the copper and aluminum veins.
The original configuration cannot guarantee high viscosity in the pressing area. This is due to low reasons. With temperature changes, the linear expansion of different metals will not be identical. This type may create a gap between the welded aluminum and the honeycomb.
When in place of the contact, the support moves. The conductors are starting to heat up. Also on the stripped conductors there is a deposit of oxides. This also reduces contact. Such a measure provokes a variety of malfunctions, which can cause you to burn. Therefore, special types of contactors are suitable for such connections.
Gwent's Clems
We turn on the electric maybe a gwent type. Such contactors have been working for a long time. This type of breed has short songs and advantages. This device is compact and easy to install. The stench allows you to combine darts of different diameters. Moreover, they can be used for both single-core and multi-core conductors. In another option, the end of the cable is cleaned and pressed with brass lugs.
What is not presented is the inability to connect terminals to more than three conductors at the same time. This simplifies the work, making it easier to do more work. Also, over time, such a rose loses its cob characteristics. The wires stop pressing tightly one by one. Therefore, when the screw connection is removed, it is necessary to periodically tighten the area where the wires are pinched.
For large-diameter wires, a connection is formed, popularly known as “grid”. Such contactors most often stop the supply of wires from a non-contiguous line to the box.
Today's roses
There are plenty of electricians to ensure the safety of the contact Call the tato-mama for a send-off. This type of discord has been around for a long time. This variety of sockets is divided into a plug and a plug, as well as a socket and a socket. In the middle of one series, such roses are incompatible with each other.
This is one of the most popular, current types of contactors. You will not be able to connect the arrows incorrectly with such a connection. The “tata” washes are completely compatible with the internal configuration of the “mami” sockets. In some cases, for accuracy of installation, the connection point is fixed. This allows anyone to understand the meanings of roses without confusing them.
The roses for sale are “mama-mama” and “tato-tato”. These are the people. It is important to use contactors with a socket or plug for the skin category.
Spring drivers for different types of darts
Various materials may be of the spring type. The stench is also associated with direct contact of the veins. The stench can be either strong or not. One of the best and most reliable ways to connect cables between mid-aluminum and aluminum is the Wago universal connector. Peretin lived under his vikoristan and may also be different.
Neroz'emni connectors for wires Vikorist the principle of screw clamps. It is also possible to stiffen the fittings, in which the metal plate is replaced with a special wire-carrying rod. The wine is riveted, ensuring a reliable connection. Bare sections of the cable must be additionally insulated.
Having looked at how it appears connectors for wires, and also their characteristic functions of the skins, you can select the shortest option for connecting various devices or carrying out repair work.