The Internet has become an invisible part of life, and every computer is responsible for its mother’s access to the limit. At home, why should you connect via a Wi-Fi router, which allows you to use it as a Wired connection(For laptops, mobile phones, tablets), and cable connection (for stationary computers).
The best way to install a Wi-Fi router
For those who are considering options for installing a router, start by choosing a location for placing the device. A bunch of factors flow into this:
- Rotating the provider's modem and cables, as a result of this;
- apartment planning;
- Place for refurbishment of a stationary computer (yes).
Find various models of drone-free accessories from Asus, TP Link, D-Link, etc. The stench can be motherly with varying degrees of fluidity data transmission, coverage area. Be careful when you choose a place for the installation, so that you have access to any place in your apartment. In this video the best decisions If the central point is the same as the cable, the modem and desktop PC can be installed. If you have to install the device closer to the computer in order to stretch the cable to the next one, then you need to focus on this factor.
How to connect a router to a computer or laptop
Learn how to connect a Wi-Fi router to your computer. The process itself is quick, but problems can arise with the setup of the device. Below we will look at the option of connecting a stationary PC through a drone-free network and for additional help. edge cable. The option of connecting a router to a laptop practically does not interfere with anything. Before purchasing, please check that there are models on the market that are not supported Wi-Fi distribution and select the role of the adapter (for connecting several devices).
At the first stage, to gain access to the Internet, you must correctly connect the device to the device. The great distributors of routers will fail, otherwise the acquisition scheme itself will be lost in the future. Axis Pokrov's instructions how to connect to a computer wifi router:
- Unpack and install the device, plug it into a power outlet. On the back panel, as a rule, there is a button to turn on the device: press it. When a signal is received, the lights on the router light up.
- There is a number of sockets on the back panel. Once again, they are trimmed around the edges and filled with a different color (blue, yellow) with a WAN signature. Connect the wire to the modem or the Internet cable. You should almost hear a clicking sound, which means that the fastening cord is installed correctly.
- If you need to connect a cable to the PC, then insert it from the empty sockets in order and stretch it to the socket on the card. When connected, the light bulb must light up, which means the signal is present.
- At the end of the drone-free connection, you must proceed to set up the network on your PC.
Wireless router connection
Most of the available options are to connect to the router wirelessly. With a laptop, everything is much simpler, since there is a module for receiving Wi-Fi signal. If we are talking about the original PC, then the situation is very complicated, because you will also need to add an adapter for Wi-Fi connection. They are easy to find at any hardware store; they are often sold together with modems.
There are two available on the market Wi-Fi options adapters for PC – external and internal. The first ones are connected via a USB cable and stand on the table, which is similar to a docking station for an Apple player. Others are mounted on motherboard via PCI connector. They work well, however, because the current option can be turned off and connected to another device, and it does not take up space on the table. Along with the device there must be a disk containing drivers and software.
After connecting to a computer, setup is carried out the same way as on a laptop. In most cases, please turn on computer Wi-Fi, you just need to know your connection from the list and enter the password. If the connection is made first, you may need to specify the adjustments provided to you at the time of signing the contract with the provider.
Drotov's connection for additional betting twists
Previously there was only one way, like before desktop computer connect the wifi router - cord. I first tried to fix the cable from the telephone line (sometimes it gets stuck), then others appeared who provided not only the computer with access to the Internet, but also the TV with cable channels. This method is commonly used by wiki experts, usually for stationary PCs. How to connect your computer to the router via cable:
- contact your provider until wi-fi router at the socket with the inscription WAN or Internet;
- Insert the cable cord into one of the LAN sockets;
- the other end of the cord is connected to the Ethernet port of the computer; after connection, the light bulb will light up.
What to do if the router does not connect to the Internet
Remember, if you know how to connect a wifi router to your computer, you have completed all the necessary manipulations, you may end up with a situation where no connection to the Internet is established. In this case, everything works correctly through the cable, but the drone-free network does not transmit data, but you can see in the connect list. If you call your provider's support service, you will be prompted to unplug it first. wi-fi device, caulk 3-10 quilins and soak again. This really helps with those who have a lot of troubles.
If this method does not work, then it is very likely that the computer cannot automatically retrieve the IP or DNS addresses boundaries. To check the settings, you need to press on the connected right button, select the item “Career Center by Measures”, click on the imaged connection to the measure and go to the “Add-ons” tab. If the opposite point is DNS or IP is empty, then the problem lies somewhere. You need to call the support service and ask what information you need to register with the authorities. After removing them:
- Click on the connection and click on the “Power” button.
- Find the point where TCP/IPv4 ends. Click on the new one and click “Vlastivosti”.
- Activate the items “Victory your IP address”, enter the data given to you by your provider.
- Repeat the same for DNS gateways.
- Click "Ok" and close other tabs.
Video instructions: how to connect a router to a computer
Did you find a favor from the text? See them, press Ctrl+Enter and we’ll fix everything!Discuss
How to connect a wifi router to your computer
Who knows a lot about how setting up a router for a home wiki is a much simpler setup for a primary user. Since it is possible to contact your Internet provider, and perhaps without any costs, the idea of setting up a Wi-Fi connection can be laid on their shoulders. In addition, you can set up a paid facsimile service yourself without any special difficulties.
Ozhe, we got to the hands of the router. It doesn’t matter if it’s absolutely new from the store or from Vikoristan. Why should we talk about setup and what do we really need for Wi-Fi to work?
What will we need to earn:
- Reset the settings to the factory settings, so we will be able to get a used router. If a new whole document is being vicorized, skip it;
- Connect the router to your computer, laptop or laptop and connected to the Internet;
- Go to the admin panel of the router;
- Enter access data to the provider's network;
- Block access with a third-party password.
Methods for setting up a wi-fi router
- Automatic. For additional special program-master, which is located on the disk with software that is included with the drone-free router. You just need to insert the CD disc into optical drive computer.
- Manual. Vikorist web interface of the router. Setup is done via a PC browser.
The first method is the simplest: router setup master ask you to enter the necessary data (at the shortest option, you will be able to select from the list of your Internet provider) and the program itself will set up wireless connections. You need to go to the customer service provider to find out how to keep the drone-free router alive - before and after launching the configuration program, as this is important for the correct operation of the configuration program.
Of course, it may turn out that your provider is on the list of approved programs. In such situations, you have to manually configure the router via its web interface. In this procedure, I will begin the report and describe the 3 main steps for setting up a router:
- establishing a connection between the computer, connecting to the LAN port of the router, and the router itself to deny access to its web interface
- configured connection to the Internet (WAN parameter - port), vikoryst data from the provider
- fine-tuning dartless lines, which includes setting security parameters (password, choice of encryption method, etc.), as well as physical parameters, such as signal strength and choice of drone-free channels
This is definitely not all, you can optionally adjust other parameters related to protection and additional functions Otherwise, the rest should be determined by the router model.
Static and dynamic IP addresses
Information about the type of IP address you assigned to your provider is very important when setting up a router. Yakshcho
your computer, which was previously connected to the drone and entered the IP address (depending on the terms of the agreement), then your IP address - static.
If you can’t guess anything about the IP, and, let’s say, there’s only a login and password, then the router can be removed
yogo automatically. Thus, your IP address is dynamic.
How to reset the router setup
It is necessary to reset the router settings (turn the router settings back to factory settings) if you encounter problems during the settings, you are confused, or something has gone wrong. For such situations, there is a special button on the body of the wi-fi router - RESET. When is the moment to put pressure on it and how much to put it off, it is said in the handbook of the customer, or focus on changing the behavior of the indicators on the front side of the router, which will indicate that the transfer has been sent.
I want to earn your respect that this is the only way to change I forgot my password on the router.
This concludes the theoretical preparation for setup. Next, I will report on the skin of 3 layers.
Setting up a connection with a router on a computer
- Connect cables local measures(ports 1-4), as such - vikorystuvatimutsya.
- Connect the provider cable to the Internet router port (also called WAN port).
- Then the router's power supply unit is connected, plug it into the socket.
To include the life block into the rest of the army.
Any kit that comes with the router includes two “accessories”: a power supply unit, as well as a hemline cord (patch cord). When installing the first one, it is recommended to install the cord included in the kit. If so, you’ll worry about the usefulness of the router.
First you connect the wifi router at home, first you connect it “from the computer”.
A. Yakshcho The DHCP server is disabled on the router, which automatically distributes IP addresses to connections
Make sure that your computer has enabled automatic retrieval of intermediate addresses. For this purpose, point lower.
2. In the local network connection window, click “Power”.
3. Next, in the next window, select “Internet Protocol Version 4 (TCP/IPv4)” and click on the “Power” button.
4. In the window "Power: Internet Protocol version 4 (TCP/IPv4)" on the tab "Underground" there are faulty switches
be in the "Refuse IP address automatically" and "Refuse DNS server automatically" positions. If this is not the case, install them in the required position and close all windows by clicking on “Ok”.
B. Yakshcho The router is assigned a static IP address, sign the upcoming events.
1. Find out from the owner of your router the IP address for the manufacturer (often it is indicated on a sticker when the device is installed). Repeat steps 1-3, aiming.
2. In the “Power: Internet Protocol Version 4 (TCP/IPv4)” window on the “Internal” tab, set the jumpers to the “Victory IP address” and “Victory DNS servers” positions. If this is not the case, install them in the required position and close all windows by clicking on “Ok”.
3. In the IP address field: enter the IP address, leaving (after the dot) the number that is greater than the number in the router’s IP address. For example, if your router is assigned the address 192.168.1.1, you can enter 192.168.1.2.
4. In the “Address mask:” field enter the value 255.255.255.0, and in the “Main gateway:” field “Forwarding DNS server:” - wi-fi IP addresses router.
Close all windows by clicking on the “OK” button. Now everything is ready to configure the router.
Setting up the router with help from the master
There is nothing tricky about this procedure. Insert the software CD that came with your Wi-Fi router. Run the installation wizard after accepting licensing benefit at the request.
Press further until the data is written droneless connection. In the appropriate fields, enter the SSID of the drone-free network (the name of your network, which will appear when searching) and the password, or fill in the password, they can be changed later.
Connection setup up to Internet wi-fi The router will be selected automatically. If your connection type requires a login and password, then you can enter them later in the web interface, and for any other type you can quickly access them, as after automatic adjustment Internet without showing up Just don’t forget to write down your login and password to access the router’s web interface (if the router generates them itself, in the installation wizard window).
After setting up the router, you will automatically go to its web interface to set up your Internet connection manually.
Respect!
As you all followed the instructions of the installation master and did not cancel the notification about the repair, but, unfortunately,
The connection to the Internet has not been disconnected, there are 2 options for the problem:
- As I wrote more, it is necessary to enter additional adjustment connection to the web interface.
- Another option is that the provider allows access to its network for only a device with a unique MAC address - an individual number for the device. It works like this: the provider remembers the MAC address of the client device the first time it connects to the network and then allows access to it. This information may be available daily in the information about the connection setup. To fix this problem, the routers have been redone special function cloning and manually entering the MAC address, about which I will explain a little later.
Setting up the router manually (on the example of an Asus router)
It is not possible to set up the connection with a help master, because it is necessary to set up any parameters that are not transferred to the router installation master, you can do the setup manually through the web interface.
Open any browser and type address row Router IP addresses:
Enter your name and password in the window that appears in the following fields (their values are indicated in the username of your router) to access the web interface. Please be aware that after setting up your connection, it is recommended to change your username and password for security reasons.
Deyaki vyrobniki vykoristovaya for the entrance to the panel 192.168.1.2 or 192.168.0.1
In the LAN section of the router interface, select the "DHCP server" tab and check the "Disable DHCP server" - "Yes" box. You yourself will give the router the ability to distribute IP to devices that connect to the new one automatically.
In the WAN section, in the “Internet connection” tab, select the type of Internet connection.
Select the type of Internet connection, look at the documents provided to you by your provider, or read the article: “How to determine the type of Internet connection.”
The most extensive options for connecting to the Internet
- With dynamic IP (Automatic IP or DHCP)
- Z static IP address(Manually configure the field Setting up the IP address and WAN, mask, gateway...)
Let's look at another option, with a static IP address. As soon as you decide to become active, the fields for entering the parameters of a static connection - “Setting up the WAN IP address”, which must be filled in correctly with the data taken from your Internet provider.
Click "No" and fill in all fields.
Make sure that in this type of IP address and other boundary parameters are fixed, enter their trace exactly as specified by the provider.
If you have selected the option with a dynamic IP address, either PPPoE or L2TP, then setup will be easy and all connection parameters will be taken by the router from the provider automatically. For the other two types of connection, you must specify the name and password as shown by the provider (or in other “Service name” fields).
Complete the adjustment by pressing the “Save” or “Save” button.
In some cases, the provider binds the client to the MAC address (physical address) of your computer, so that no one else can connect in place of the other. Whenever you try to access the Internet using a router, you will become unable to do so.
To uniquely identify this, change the MAC address of the external interface of the router so that it matches the MAC address that your provider has assigned you to (depend on the address of the external interface of your computer).
This operation is called MAC address cloning, however, this function on the router’s web interface always bears the same name.
To clone the MAC address of the computer that was connected to the Internet by cable before installing the router, enter it in the MAC field in the “Special benefits of Internet services” section of the WAN section, Internet tab dnannya.
Save the settings by pressing the “Save” button.
How to find out the MAC address of your computer
To find out the MAC address of the computer and enter it when setting up an Internet connection on the router,
make a step:
1. Click on the computer icon in the task area (tray), click on “Career Center with shared access”
And in the window select “Local network connections”.
2. Click the “Add” button to enter the MAC address.
MAC addresses will be listed in the “Physical addresses” field.
Manually adjusting Wi-Fi parameters
If you have done everything correctly and specified the correct connection parameters, after restarting the router you will be denied access to the Internet from the computer on which you configured the settings. Open your browser and type
address of any website, for example, MediaPure.Ru. The site side is now open, now you can start
before setting up the drone-free network (wi-fi).
In the menu of the router’s web interface, select the “Bezdrotova” section, the “Zagalni” tab.
Please note that some routers support drone-free networking in two bands (5 GHz and 2.4 GHz). Adjust the drone-free network to the larger requested 2.4 GHz range.
Select the droneless tracking mode. Shorter option- Universal configuration that will ensure compatibility with both new and old versions of the Wi-Fi standard. It may be called “Mixing” or “Auto” (automatic mode).
Indicate the SSID of the track (name of the track that will be displayed at the time of scanning) in the same name field. Select the security option in the “Authentication method” field, I recommend WPA2-Personal, why, read in the Wi-Fi section. Enter the password (or key) in the “WPA Front Key” field. This key and SSID are required to establish access to your dartless devices Oh, it is recommended that you save them in a file or write them down here, saving them in a safe place.
It is recommended to select an SSID so that your home-made dart-free measure The call was not visible, but you can still connect to it, since you already know the SSID. To save your settings, press the “Save” or “Save” button. The drone-free range in the 5 GHz range is adjusted in a similar way.
For fans of video instructions
Respect! Be careful when updating your router firmware. The need for this is due to incorrect operation of the router and connection problems. It is important to read the section of the Koristuvach allowance about updating software security router and follow the recommendations carefully. Updating the router firmware is an extreme task, it is not possible to go ahead without any real need, since with a fully tuned drone-free network there is no such need.
By the time the article was created, the materials were published https://mediapure.ru/
About how to connect a Wi-Fi router to a computer, homeowners are asked if they want to use the Internet throughout the apartment and have free access to Wi-Fi from several devices.
In addition, it depends on how many computers can be connected.
Installing and connecting a router is a complicated process, which, however, requires careful attention to the algorithm.
Installing a router
Installing a router can be done in two ways:
- dartless border;
- for an additional spinning bet (a special draw, which, say, comes complete with the device).
Another method is less short. In order to make connections, three main warehouses are required:
- Vlasna wi-fi router;
- A stationary computer or a laptop with an installed border card;
- Merzhevy cable.
If you only need a Wi-Fi router to access the Internet on your phone or tablet at home, then you’ll be fine inexpensive models routers for 4-6 devices.
However, there is great respect for those who can connect to a number of computers at the same time.
Please! You should especially provide information before installing it if you plan to save your data. Also, when choosing a product, check what kind of liquid the device supports, as they can be gigabyte-sized. In another form, the robot on the Internet will become even more complex.
Drotov connection
It’s easy to connect the router using a twisted pair; however, with such a connection, its operation becomes more complicated.
Close, you won’t be able to go away from your computer anymore, just get up.
And this option does not work for laptops. Otherwise, it may be bad decisions if you have a stationary computer.
There are also advantages to connecting to Wi-Fi. For example, it is important that this way the Internet causes fewer interruptions during work hours.
- First, connect the Internet cable to the router.
Find a WAN port on the rear panel of the device and connect the cable to it. Then take the middle wire and connect it to the router to the Ethernet port, and the other end to the external port on the computer.
- Adjust your router.
Open any browser and enter the IP address in the address row. Addresses are to blame mother format. The correct IP router can be found on the sticker on the next day or in the technical documentation before purchase.
Once the IP is registered, the setup program will prompt you to enter your login and password.
Then you can change your password for security. After this, the main menu of dart range settings opens.
Important! If you rely on wired connections, pay attention to the number of connectors in the router. How many computers can be connected to the device.
Drotless connection
If you intend to connect a Wi-Fi router in a dartless way, then making the connection will happen in two stages.
The first one is focused on getting things done, and the other one is working on safe measures.
- In the router menu, open the “Wi-Fi” tab, and there you will find a tab called “ Manual adjustment parameters". The names of the tabs may vary depending on the type of router, but their meaning may be obvious.
- In the main parameters, the SSID field is known. No one is prescribed a measure. This is the name, if you want to connect the Internet from any device. Set the correct region for which wi-fi connection works.
Next you need to select a data transmission channel. It is better to deprive the one that is indicated for the first time. However, you can change it this year to alleviate problems with access to the Internet.
- Choose standard wi-fi. Completely remove the mixtures established for the washing process. Now choose how many users can connect to multiple computers at the same time.
If a large number of clients are not guilty but are excluded, select “0”.
- Go to the “Security” or “Security Options” tab. In the field of animals, select the type of protection. Use WPA2-PSK. Enter a password in the "Key" field. So come to snatch you from the evil and victorious fans of the Internet for someone else’s money.
The device can only be connected to the network if you know the password.
The advantage of this method is that you can quickly access the Internet in your entire apartment.
In addition, only with this type it is possible to connect another, third or more computers that are located far from the device.
Corrisna information:
Return respect to the program. This is a manual utility that allows you to scan available Wi-Fi limits, remove the impersonal basic information about them and select the most suitable access point for your device.
Drotov's measure It’s easier to connect the three parts and doesn’t require as much additional robots with security settings, as much as you can enter data that is always at hand.
Go to the “Merezha” tab in the router menu, and then to the “Connection” tab.
Fill in the blank fields if necessary. If all fields are completed, confirm your selection.
Go to the “IP Settings” tab. Here you need to specify the LAN edge address and the edge mask. These data may be specified in the service agreement by the provider.
However, some data are not specified. With this option you can call your provider for customer support.
There you will be asked to provide this information. Confirm your choice by clicking the “Save” or “OK” button.
The firewall, although safe, is not very manual and does not allow you to connect the Internet to another or link to a number of computers.
The choice of connection type depends on the customer's needs.
How to connect a router to a computer
To connect the router to your computer, you need to connect a blue cable to one of the four blue sections. If you have configured your computer, your connections are configured in the Care Center through measures and separate access.
Many active participants in the global network have network devices that have taken root in the home, but in some cases it is necessary to set up the Internet on a computer via a LAN cable through a router. So, if the Internet provider cable is not inserted in the middle I'll cut the map computer. Together with you, if you are connected to your provider via a modem, set up the mode clear bridge(bridge), you will also find instructions on how to directly connect your computer to keruvannyam Windows 10 to the Internet.
Computers that run on Windows OS (7 and 8) of previous generations are configured in a similar way. Smart access to the global network by providers can be divided into dynamic and static connections. In the first case, selecting “IP addresses”, “Address masks” and “Main gateway” is selected automatically, and in the other you need to enter the access parameters specified by your provider in the agreement established with him in the appropriate field.
Many companies provide dynamic and static access, however Great Gravecs(Rostelecom, TTK, MTS), you can create a PPPoE connection by entering your username and password. Many providers set up the Internet on the computer and send it to the client master, who completes all the necessary steps. However, not all providers process requests promptly, and not all masters rush to respond, and rather than wait for years and sometimes days, you can set up your Internet connection yourself.
Dynamic and static Internet connections on a computer.
To set up direct access to the Internet on your computer, just plug it into the PC’s Ethernet port first. After right-clicking on the “Start” icon, context menu Select the item "Merezhevi connections".
In the new open window, you need to select the “Ethernet” adapter (we are connected via cable), right-click on the new one and select the “Power” item in the menu.
Dynamic IP. I already realized that since your Internet provider provides dynamic access to the global network, all the necessary parameters for accessing the Internet are automatically selected. In order for the connection to be established, it is necessary that the IP addresses and DNS server addresses be in the mode - reject automatically. After all, these parameters are set like this and there is no need to change anything here.
Static IP. The setup of this connection involves manually setting the parameters assigned to the provider agreement. Then, you need to enter the visible “IP address”, “Address mask”, “Default gateway” and “Respect and alternative DNS server” in the visible field. For example, the filling of fields can look like this:
- IP addresses: indicate a stable IP address;
- Submersion mask: determined automatically (255.255.255.0);
- Main gateway: specified in the agreement. When connecting via a modem, enter your IP address (name 192.168.1.1).
- Vykoristovat current DNS server addresses: as recommended by the service provider. If there is no stink, you can use universal ones. For the butt in the skin row, alternative DNS servers are first indicated.
Google Public DNS: 8.8.8.8 and 8.8.4.4;
Yandex DNS (Antivirus, Safe): 77.88.88.88 and 77.88.8.2;
Yandex DNS (Without pornography, Family): 77.88.8.7 and 77.88.8.3;
As you can imagine, the DNS server itself influences access to any other site. So, if necessary, for example, you can block access to sites for adults by specifying secondary servers. After entering all the necessary parameters, click the “OK” button. After this, the icon in the “Internet Access” tray will be active, and you can enter global measure.
Setting up Internet connection (PPPoE) on a computer running Windows 10.
If the Ethernet port of the computer is plugged in completely LAN cable provider and to connect to the Internet you need to enter your login and password after creating a PPPoE connection. To set up, you need to go to “Start” -> “Settings” -> “Merezha and Internet” -> “Ethernet” -> “Control Center for Edges and Backdoor Access”. Click “Creation and adjustment of a new connection or network.”
At the next window you will need to select a connection type. As soon as we set up the Internet directly on a computer with an Internet provider (without participation border extensions), then we select “High-speed (with PPPoE)”, and if we set up the Internet, for example, through a 3G/4G modem, then we would need to select “Connected”.
In the remaining window, enter the login password seen by the postal service provider, and give the connection name to be created. If you check the box next to the item “Allow other accounts to connect to other accounts,” then you will allow access to the global network to other cloud accounts, which, of course, you already have.
So, on your computer, for example, for the skin member of this family was created oblikovy record, then you are free to allow them or block access to the Internet through the connection you created.
After filling in all fields, click the “Connect” button.
If the connection with the Internet provider has been established, and you have entered the correct login and password, then after a short check of the entered data, the connection will be created.
If you have any problems, let's discuss them in the comments together. Boo!