Go to virtuapc.ru Golovna If you have forgotten your WiFi password, you will be able to choose from a number of ways to update your access code. You can find out the password from the connection authorities for assistance in retrieving Features Windows or special software, and also look at the router interface and
configuration files
mobile phone
, since you connected to the dartless line. Looking at Windows in person If you want one PC or laptop to connect to a Wi-Fi network, then finding out the key is not always difficult.
- What to do:
- After completing the descriptions of the actions, the “Security Key” field will display the password that you want to remember.
- All customers should ask what to do, since the Center for Curing does not have a curing option. How did you get stuck with similar problem
, then you can find out the password for Wi-Fi in a slightly different way:
Open the list of available droneless access points in the alert area. Find the route to which the computer is connected (the order will be “Connected”). Click
right button
In other words, it will go to power. The same things will appear as in the case of Vikonanny, as described above. Next, the instructions are repeated: go to the security settings and increase the display of symbols to view the savings key for installing a connection with the network.
Default gateway = router addresses. 
Write it in the address bar of any browser, then press the Enter key.
You will be prompted for authorization; you will need to enter your login and password.
You can see them in the documentation and the router case.
The admin/admin pair is installed on most models. If you haven’t changed anything, then this login/password pair is fine. What should you do if you forgot your router password? The simplest way is to drop it to the factory level. However, after the reset you will need to re-establish your connections, then you will go to the interface for standard authorization data and you can set a different password on Wi-Fi.
If you have already entered the router interface, you need to know what to do next. 
The finishing procedure is simple:
There is no need to do anything else, just close the web interface of the device.
Depending on the router model and firmware version, the names of sections and items can be changed, but you will not be able to recognize the password for Wi-Fi and update access to the network on other devices. Vikoristannya phone If you have connected to Wi-Fi on a phone running Android OS, you can find the password in the configuration files of the mobile device.
To review your password and other information about dartless connected must be installed on your phone
- addon Root
- Browser and allow it access to system files.
- In the middle of the file, information about all Wi-Fi points that the phone has ever connected to is saved. Information about the skin edge begins with the words “network” and ends with a priority and a curly bow that closes. If you are not connected to this network, select "Save Networks" and then delete the Wi-Fi point you don't need.
How to forget Wi-Fi on your iPad or iPhone?
Pokrokov's instructions on how to forget the Wi-Fi connection on your iPhone when it becomes available:
- We go to “Settings” and select the “Wi-Fi” section.
- Bilya Wi-Fi hotspot There will be icons - the letter "i" in the front.
- We press on her.
- Information about the measure will appear.
Click “Forget this measure.”
We confirm the selected action.
- The edge will be visible. How to forget Wi-Fi on Mac OS X In order to delete (forget) the Wi-Fi connection on a Mac, there are a bunch of awkward steps:
- Click on the connection icon and select “Disable network settings”.
- Or you can know in “
System adjustment
", "Merezha". Press the "Dodatkovo" button at the bottom. A list of connected measures will appear. You can see the one that needs to be deleted and click on the button with the “-” icon. That's all. The mereja has been seen. Using these methods, you can simply forget the Wi-Fi connection, connect to it in a new way and resolve the problems that have arisen. When I installed Windows 8.1 on my laptop, I noticed a great insecurity: the availability of the option “Forget this thing” on the panel in
Merezhi
. That's all. I'm not missing out A list of connected measures will appear..
in a reasonable way That's all. vidalnya dartless measure, which were no longer used, because your password has been changed.
How can I get around this problem and remove drone-free limits in Windows 8.1?
Let's find out the truth from your assistant.
How it works with Windows 8 That's all. In Windows 8, if you want to remove the dartless border, you open it in the panel (in which lesson it is explained: ) and right-click or click and press Merezh as you want to delete..
The context menu opens and it turns on the ability A list of connected measures will appear..
Press on it, and the edge will be removed.
You can connect to the limit, since a limit has recently been discovered.
How to forget drone-free settings in Windows 8.1, through customizing your PC That's all..
If you have installed Windows 8.1 Update, which will be released for all Windows 8.1 customers on the 8th quarter of 2014, then you have another way to forget about drone restrictions.
This method does not work on a Windows 8.1 device without this update. Open the PC settings and go to the item.
Windows 8.1 displays a list of non-dart connections, for which connection details are shown.
Select the measure you want to forget and press
Forget Selections that are no longer saved in Windows 8.1 will require you to enter your password again if you connect to them. How to forget drone-free lines in Windows 8.1, from the command row You can view any drone-free tracker profile that is saved in Windows 8.1 if the tracker is not in range, using Team Rows
.
Launch
command line As an administrator, enter the following command: netsh wlan show profiles. This command displays all drone-free data and profiles that are saved in Windows 8.1.
The list may be long if you have used your laptop or tablet for more than two years.
Select the drone-less profile you need to delete, and then enter the following command to delete it: netsh wlan delete profile name="my profile" .
Like a butt, I saw the profile from the dartless line
swisscom And I typed: netsh wlan delete profile name="swisscom" .
How to forget all drone-free measures in Windows 8.1
In some cases, you may need to delete all profiles and savings in Windows 8.1.
Previously, I have published this article to further understand what and where to find. Just a butt why do you need to clean this stuff, let’s say you came to a crowded place and used the free WiFi. Connected before, then checked the box, connect automatically, freeloader, but then they discovered that they are hacking you and trying to hack you because you are catching a virus, it doesn’t matter.
You naturally turn on immediately, remove viruses and so on and calmly forget about this episode, an hour passes and you are again wasted in the same place, and so you have lost your tail from this connection, then I will connect again without you, which is not good, For whom and varto everything is clear.
There are at least two methods without
third party programs, which allows you to delete the wifi network in Windows 10 and other editions.
how to delete wifi connections via graphical interface
Vidality of wifi measure in Windows 7
This method
It’s best for beginners who don’t like the command line any more and go to the graphical interface.
It is known that in the lower right corner there is a border icon and it is stamped on the new right mouse button, where you will need to select the Center for merging with borders and behind-the-scenes access. You will see the Security Center with borders and behind-the-scenes access, where you will then need to go to the Control of Detachmentless Measures. Or you can immediately access the Control of Drotless Measures via the WIFI icon, by left clicking on it, I specifically showed you two ways so that you know what the methods are. The result will open a window of profiles of dartless surveys, which can be viewed by right-clicking on them. These wireless network profiles save their SSID, which is called the Wifi network and their passwords are also called authentication keys.
And so, in Windows 8, to select a wireless network, open the window with the list of available ones by clicking on the WiFi icon in the lower right corner and you will see a panel in which you must select the required network and click on it with the right button com, from the context menu click Forget Qiu merezu.
Now it’s called forgetting, we can see our relatives, well, God is from them. You will be in this situation, little ones available measures
, and you can look at the list of savings profiles and dart-free measures like this.
Press the WIN + I keys and you will see the All settings panel; for more details about the combination, read Windows 8.1 hotkeys. We can change the computer settings.
Now, to view the drone-free monitoring, select the monitoring item, and under the Wi-Fi item, select Manage video monitoring
At the Keruvannya window you will find everything you need to know Wi-Fi limits To delete a wifi network, click on the required right mouse click and select forget. Let me remind you that this list is synchronized between all the devices you log in from the cloud by Microsoft
, that has numbers i on Windows Phone remember about this
As you know, everything is just as simple, you just have to relax under
new interface
, but it’s not bad that with the release of the same RedStone you will have to play by their rules.
Through the command row
In my opinion, the most manual method is that it allows you to delete all profiles from the SSID at once.
Next I will share the scripts with you.
Let's launch the cmd command line, we will be assisted by the netsh utility.
Take a look at all drone-free surveys to help with this command
netsh wlan show profiles
You will improve your overflow.
Now let's see the TEMP measure, for which click
netsh wlan delete profile name="im'ya_merezhi at me te TEMP"
As you know, the dartless measure is no longer available. You can delete all borders using the command And always on knitting, vikory and different accessories.
However, such situations may occur when third-party accessories are connected to the Internet for which you pay.
As a result, the viscousness of the binder becomes stronger.
- And you are thinking about how to find out who is using your Wi-Fi and how to enable a third-party account.
- None of the clients want to share their money with other clients
How do you mean, what does the Vikorist measure mean?
Be careful if you want one of these signs: The indicator glows steadily. This means the transfer of information.
It is important to remember that the indicator will fluctuate when all the devices are disabled. The speed of data exchange has changed. There are a number of reasons for decreased fluidity. One of them is the connection of a third-party device. Ways to find out who is connected to the Internet
Є two largest
- manual ways
- the significance of the ignorant koristuvach. Have configured the router. Connect all your devices from
- droneless internet
- computer cream. Find out the IP address and MAC address of the computer. You can do this through the command line using ipconfig. will be indicated opposite the “Main gateway” item. Often there is writing on a sticker on the device, where the login and password for registration are also indicated.
For additional help.
To see who is connecting to your Wi-Fi, use the Wireless Network Watcher utility.
You can enchant it from the official website.
Run the program directly from your computer via a cable.