You need to disassemble a laptop when you need to get access to all of its components. Repairs, parts replacement, function check or device cleaning may be performed. Each model from different manufacturers has a unique design, location of loops and other components. Therefore, the principle of disassembly is different. You can familiarize yourself with the main ones in our separate article at the link below. Today we will tell you in detail about the disassembly of the HP G62 laptop.
There is nothing complicated in the process under consideration, it is only important to carefully perform each action, trying not to damage the motherboard or any other component. If this is your first time dealing with such equipment, carefully read the instructions and follow them. We divided all manipulations into several steps.
Step 1: preparatory work
First, we recommend that you prepare everything you need for comfortable work. If you always have the necessary tools at hand, and the space allows you to arrange all the parts conveniently, then there will be fewer problems when disassembling. Please note the following:
- Look at the size of the screws screwed into the laptop case. Based on this, find a suitable flat or Phillips screwdriver.
- Prepare small boxes or special labels to somehow sort and remember the location of the screws of different sizes. If you screw them in the wrong places, there is a risk of damaging the system board.
- Free your workspace from unnecessary appliances, provide good lighting.
- Prepare a brush, napkins and thermal paste immediately if disassembly is carried out to further clean the laptop from debris.
After all the preparatory work, you can proceed directly to the actual disassembly of the device.
Step 2: Unplug and remove the battery
The process of removing components is always carried out only when the equipment is disconnected from the mains and the battery is removed. Therefore, do these steps:
Step 3: Unscrewing the back panels
The RAM, network adapter, hard drive and drive are located not under the main cover that covers the motherboard, but under special panels. This system allows you to quickly access components without completely disassembling the case. These panels are removed as follows:
You do not need to continue disassembling if you needed to access one of the devices described above. Otherwise, go to the next step.
Step 4: Removing the Main Cover
Access to the motherboard, processor and other components will be gained only after removing the back panel and disconnecting the keyboard. In order to remove the cover, proceed as follows:
Step 5: removing the keyboard and other mounts
It remains only to disconnect the keyboard and everything that is under it:
In front of you is the motherboard with all the other components. You now have full access to all devices. You can replace any component or clean them from dust.
Disassembly of the HP Pavilion dv6 notebook will be carried out in order to eliminate overheating. First, I highly recommend that you read the article where I tell you how to independently determine if overheating is taking place and whether it is worth disassembling a laptop at all.
Suppose that we have diagnosed overheating and we need to take the necessary measures. First of all, check if the warranty period has expired. after dismantling the laptop, the warranty will be void.
Warning: all responsibility for the result lies with you. Before doing anything, please read the article to the end in order to adequately assess your capabilities.
Disassembly of the HP Pavilion dv6 laptop will take place in two stages - disassembly and then cleaning.
Disassembly HP Pavilion dv6 laptop
We remove the battery. To do this, move the latch as shown in the picture.
Unscrew 4 screws and remove the cover.
Disconnect the hard drive cable under the cover (pull the tab upwards) and take out the hard drive.
Unscrew the screw that holds the DVD drive. We take out the drive.
Disconnect two wires from the WiFi module (remember their location).
There is a loop next to the WiFi module, which must also be disconnected.
Unscrew the remaining 16 screws.
We remove the keyboard. You need to pick up the keyboard from above and lift it. This must be done carefully so as not to damage the cable that holds the keyboard.
If the keyboard won't budge, you can push it through the hole in the bottom of the laptop.
Disconnect the ribbon cable under the keyboard. To do this, you need to open the eyelet.
Three loops will become available, which also need to be disconnected.
The top panel can now be removed. Under it we get access to the motherboard, where you need to disconnect four cables.
A screw is hidden under the cable from the matrix, which must be unscrewed. Unscrew the screw and remove the black plastic piece.
We remove the fee. Disconnect the power cable.
Everything. The board is in our hands. You can proceed to the next stage.
Cleaning the laptop from dust
We unscrew the four screws that secure the heatsink to the board. Turn off the fan power.
We remove the cooling system. Then we open the fan case. To do this, unscrew four small screws.
We remove dust wherever we see it. The old thermal grease should also be removed from both the heatsink and the chips. Then you need to apply a thin layer of new thermal paste and replace the thermal pad.
Never use thermal paste instead of thermal pad. I also do not recommend using a cheap Chinese thermal pad. It has poor thermal conductivity.
Putting it up in the reverse order. Good luck!
If you are starting to disassemble a laptop for the first time, we recommend that you pay attention to the article "". This article contains guidelines to help you avoid common mistakes during the disassembly process.
HP Pavilion 11 is based on the same chassis as HP Pavilion 11-E000, 11-E110NR, 11-E010ER, 11-E010SR, 11-E000ER, 11-E117AU, 11-E108AU, 11-E001SA, 11-E000ES, 11 -E014AU, 11-E100EO - these models have the same disassembly process.
How to clean your laptop from dust HP Pavilion 11
If the laptop overheats during operation and shuts down abruptly, this is most likely due to overheating of the cooling system. The reason for this is the accumulation of dust on the radiator. If you do not clean the cooling system in time, this will lead to damage to the motherboard in the laptop. You can fix this problem yourself by repeating all the steps shown in the video below. The information provided in our video instructions makes it possible to clean the laptop from dust yourself at home. The necessary repair tools can be purchased at the end of the page.
HP Pavilion 11 Laptop Keyboard Replacement
Repair of the keyboard in most cases is caused by spilling tea or coffee on the surface, and as practice shows, there are two options for the outcome:
- Remove the keys from the keyboard and clean their mechanisms with distilled water or alcohol, using a brush.
- Replacing with a new keyboard (if cleaning the buttons did not help), then the liquid got on the lower layers with films where the tracks are located.
Installing an SSD in an HP Pavilion 11 laptop how to change the hard drive
Video instruction on which you can yourself replace HDD with SSD in HP Pavilion 11 laptop... You will also learn how to replace a faulty hard drive with a new HDD. Classic magnetic disks (HDDs) are more fragile and much slower than modern SSDs. Consequently, replacing the HDD with an SSD will lead to an increase in laptop speed at times. Our video below shows step-by-step instructions on how to install an SSD in a laptop.
How to increase RAM on HP Pavilion 11 laptop
In this video instruction, you can independently add RAM to HP Pavilion 11 laptop... Before buying RAM for your computer, you need to know what type of memory, DDR3 or DDR4, is installed in your model. The maximum volume for each laptop is different. As a rule, the manufacturer specifies the maximum amount of RAM that can be added to the laptop. It also depends on the number of DDR slots soldered on the motherboard. This is also individual for each model. How to increase the amount of RAM, you can find out from our video instructions below.
Replacing the Wi-Fi adapter in the HP Pavilion 11 laptop
If in laptopHP Pavilion 11 Wi-Fi does not workit is likely that the wireless module itself is broken and needs to be replaced. It happens that wi fi disappears in a laptop or does not see wi-fi - this can also be a problem in the module itself. To solve this problem, you need to reconnect the wi-fi card. Do not forget if the wi-fi in your computer is missing - this may be due to drivers or software. Initially, it is worth excluding the possibility with faulty drivers, and only then replace the Wi-Fi adapter.
HP Pavilion 11 Power Button Replacement
The power button in many models is installed as a separate module that can be replaced without the need to solder anything.
By what signs can you determine that there is a malfunction in the power button:
- the hit of a sweet liquid on the button, as a result of which the button began to be pressed poorly and stick;
- due to wear of the button mechanism due to prolonged use of the computer;
- fracture of the cable that goes from the power button to the motherboard.
Reassembling HP Pavilion 11
Once disassembled and repaired, this video will help you reassemble your laptop.
In this article, you will learn about the intricacies of disassembling notebooks version HP-Pavilion-G6. To disassemble your Pavilion-G6 laptop successfully and without complications, use the tips in this manual to help you disassemble it correctly and effectively.
HP makes good electronics, but like all other gadgets, the HP Pavilion laptop can break.
Laptop components and components are available and easy to replace. To get inside the HP-Pavilion g-6 laptop system, to remove dust, replace any board or change thermal paste, you will need to open the case. It should be remembered that disassembling a laptop is a tremulous business, it does not tolerate haste or oversights, so please be patient, set aside an hour so that no one bothers you, and you can get down to business using the instructions below.
The first thing that needs to be done is to remove the battery from the laptop (those who are not particularly patient in disassembly may not remove it). This is the simplest step, but you need to complete it first. 
Now you will need a screwdriver to unscrew the screws securing the laptop case. Flip the device over to access the rear plastic compartment that covers the main components of the computer. 
When the screws are unscrewed, you can remove the cover, under which you will immediately find a 2.5-inch SATA hard drive, a RAM card (4 Gb DDR3), a network access card and a CMOS element that provides power for Bios.
To remove the hard drive, you must remove it from the clips. This is done by gently pressing the hard drive case with a shift to the left. You will feel when the latches release it. Then remove the memory card by loosening the retaining latches, then it will easily slide in for removal. 
Now we remove the DVD drive. The bolt that holds it can be easily identified visually. We also carefully unscrew it so as not to damage the adjacent parts, and pull out the DVD-Rom without effort. 
Be careful, if the drive does not want to exit, inspect carefully to see if all the bolts are unscrewed, one of which is imperceptibly located near the network access card.
After removing all the most important parts, you can start removing the keyboard. Its mounting system is quite simple, but it takes a little dexterity and patience to remove the keyboard from the HP-Pavilion G6 laptop without damage. In total, the keyboard on this laptop is held by five latches located on the top of the keyboard.
For work, you need a flat screwdriver, which you need to press down on the latch and slightly raise the dial. In this position, the clip does not block the keyboard. You need to repeat this procedure with all the clips, and when they are disconnected, you can slowly unfold the dial and disconnect the ribbon cable on the main board.
It can be assumed that half the battle has been completed, and now all the screws on the laptop case should be unscrewed.
It is also necessary to disconnect other loops that opened in the place where the keyboard stood.
Now we open the case of the HP-Pavilion G6 laptop. Use a plastic card or other narrow object to carefully detach the top compartment. Now you will have access to the batteries, coolers, USB ports and other elements on the main board.
As you can see, you can independently disassemble the HP-Pavilion G6 laptop, but be careful not to damage the fragile microcircuits. Now you can replace parts, clean the insides from dust or replace thermal paste.
Hello friends! Today we will learn how to disassemble the HP Pavilion dv6 laptop, namely the dv6-6051er model.
First of all, we remove the battery and the compartment that covers the hard drive and RAM.
Next, unscrew all the bolts, as shown in the photo below (in red), and also disconnect the hard drive and the small wi-fi board (in orange).
Now we disconnect the DVD drive. There are 3 more bolts under it.
There is a "sneaky" bolt under the hard drive, which is often overlooked. Be careful and unscrew it too.
Do not forget that the keyboard must not be jerked upwards when removing, as you risk damaging the ribbon cable. Carefully tilt it towards you and disconnect the ribbon.
The next step is to unscrew the screws that are under the keyboard and disconnect the cables.
Now we pry the top of the laptop with something thin and hard and remove the panel.
Half way passed and now there is not much left for a complete instruction " how to disassemble HP pavilion dv6 laptop".
Before us is the HP dv6-6051er laptop motherboard. We disassemble further. Unscrew 1 bolt and disconnect the remaining cables.
Raise the soundbar slightly so that you can lift the motherboard.
The last thing that holds the board is the power wire. To remove it, you need to lift and turn the motherboard.
IMPORTANT! Do not pull on the wires, otherwise you risk the connector stuck in the connector and the wires in your hands.
Use some kind of tool (a screwdriver for example) for auxiliary purposes.
Now the question " how to disassemble hp pavilion dv6 laptop"can be considered closed. The board is in front of us.
However, if you need to clean the cooling system, then we disassemble it further.
Now we clean the cooler from dust, the surface of the chips from the old thermal paste and apply a new one.
- The presence in the body of the copied (processed) material of an active link to the site www.site
- The link must be open for indexing by search engines