Golovna  /  Breakdowns  /  How to set up wan connection on dir 320. Old horse, don’t give a damn about the furrow

How to set up wan connection on dir 320. Old horse, don’t give a damn about the furrow

Breakdowns
15.05.2021

For our guide to setting up the DIR-320/NRU, we'll look at how to set up this router in DHCP mode, change the MAC address, as well as the PPTP (VPN) client mode.

and other models of “Links” that we might not have guessed. Well then... Please note that you have in your hands one of the D-Links with the new web interface, you have taken it out of the cardboard box along with the life adapter by merging cable . On the front side of the router you will find LED indicators How to talk about the “behavior” of the router in the process Narazi hour (about the work of your interfaces). On the rear panel, right-handed from the antenna, you will see 5 edge sockets: 4 of them with inscription LAN requirements for connecting internal cables to home PCs, and a single connector with the inscription INTERNET requirements for connecting internal cables to home PCs, and a single connector with the inscription The edge cable is connected to the Ido (this interface is usually called in routers WAN). Right view to the retouch interface

USB Narazi A socket for connecting a 3G modem to a wireless Internet provider, and then a socket for life and a button recessed into the body RESET To reset the router you need it every time.

Up to 4

Using the DIR-320 ports, you can connect up to 4 PCs or laptops via an intermediate cable.

Before speaking, one of these cables is blue in color (primary patch cord)

Now you should switch the TCP/IP setup on your PC to DHCP client mode (automatic IP address retrieval).

Below we will look at how to work on Windows XP and Windows 7.

Connecting the D-Link DIR-320/NRU router for Windows XP:

Start - Control Panel - Network Connections - Local Network Connections - Power - Internet Protocol (TCP/IP) - further div.

Connecting the D-Link DIR-320/NRU router for Windows 7: Start - type Pereglyad merezhevih - select the following search results - Perevlyad connect the edges

- Connections via local network - Power - Internet Protocol version 4 - further div.

Behind the scenes, D-Link shows an internal IP address in the range 192.168.0.1/24.
Therefore, after 10-20 seconds, your PC or laptop will have to change the IP address of the router itself.
You will see icon 192.168.0.101 or 192.168.0.102.
The entry about the network card being assigned to DHCP means that the router has successfully identified the internal IP address to the computer via the LAN interface.

If you don't see any IP addresses like - 169.***.***.***, then you won't be able to solve problems with the DHCP client on your computer.

Most often, this may be caused by firewalls (firewalls), but there are other reasons... In this case, it may be a good idea to register the necessary IP addresses in the configuration of the boundary card manually. For this purpose it is enough to enter the current IP parameters on your PC or laptop: IP - 192.168.0.101 Submersion mask - 255.255.255.0 Main gateway - 192.168.0.1 DNS - 192.168.0.1 Setting up the router We will configure D-Link DIR-320 via the web interface. For this you need any browser on your computer (Opera,

Internet Explorer , Mozilla, Chrome) in the address row, go to the address: http://192.168.0.1 (check this address for all D-Links).

You can view the router's settings on your computer screen. To log in to the D-Link web interface, you need to enter your account username and password, and then click on We will configure D-Link DIR-320 via the web interface. Login . For the rest I'm a koristuvach

- admin, Password DIR-320, please read the information about the device:

Important: to save the configuration after any change to the settings (!), you must immediately click on the Save button on the right upper codend.

Connecting to the Internet and setting up in DHCP mode, inserting a MAC address

Now is the time to set up the connection between the router and Aido. For D-Link DIR-320 NRU it is possible to earn money at item. Connection - WAN , click in a row:

WAN interface The DHCP mode (automatically removing IP parameters from ID) has particular problems with set up D-Link DIR-320/NRU is not to blame. For whom in the field Connection type.

it is necessary to remove the option from the position IPoE In the field MAC You can create a MAC address that is identical to the MAC address of your computer that you used before installing the router, so as not to allow calls to be lost in ID.

If you want to select a router with a “private” MAC address, then remember this option and enter the MAC address, which can be found on the bottom of the router (six pairs of numbers). I'm a koristuvach

To register the MAC address of the router, you need to call the service technical support Please let me know this MAC address. requirements for connecting internal cables to home PCs, and a single connector with the inscription We won’t make any more adjustments here; everything will work in DHCP mode.

It's too late to press the button

Now it is necessary to check the feasibility of adjustment. Zrobiti can be purchased at item. Status - Merezheva statistics. Here near the field You can obtain information about whether the router's DHCP client successfully retrieves the necessary IP parameters from the ID. In fact, you can already surf the Internet from a computer that is connected to the LAN interface of the DIR-320/NRU router.:

Setting up the router in PPTP VPN "Real IP" mode DIR-320/NRU is not to blame. To connect via PPTP you need to create new interface.

(Note: to begin with, we still need to configure the router to work behind the WAN interface with the IPOE connection type). We open p. Z'ednannya, press the button Add;

To configure the router to work with a VPN connection, you must select the option position PPTP.;

Below we will look at other necessary options for setting up the DIR-320/NRU in PPTP mode [top-down]: wanPPTPSNameType

We will configure D-Link DIR-320 via the web interface.– allows you to set the method for inserting addresses

VPN servers- here you need to re-enter the password for authentication on the VPN server, so as not to fail when dialing;

Encryption- here the encryption of the data transmitted by the VPN is activated. We are deleting the option -.

Without encryption Authentication algorithm - here you can select the type of authentication that is supported by the Aido VPN server. Select the option -

AUTO or Automatic. Other options and checkboxes in this menu cannot be selected.

After pressing the button Here near the field Save The tunnel to the Aido VPN server can be successfully installed: You can check whether the VPN session has started in the menu . To send traffic through the VPN tunnel, be sure to set the label

Behind the gateway opposite the connection PPTP opposite the connection and save settings through the button on the top right corner!

Write that the PPTP type can be

Known talk about successful actions on your side. What did you write? does not appear, then at the advanced stages a pardon was allowed... — Setting up routing (routing) for access to local resources The next step when setting up D-Link routers in PPTP VPN mode is to populate the routing table.

This procedure is necessary for one-hour access to local resources in the Ido network under an hourly VPN connection. Vlasna, I can’t stop tsking you

it is necessary to remove the option from the position local resources, then you can skip this step. 10.0.0.0 .

it is necessary to remove the option from the position For those who intend to use such local services as torrents, they will have to set up routing. Buy in DIR-320/NRU You can at the point 255.0.0.0 .

it is necessary to remove the option from the position Dodatkovo Routing.

it is necessary to remove the option from the position This menu is a table for entering static routes. To create a new local route for the D-Link DIR-320/NRU, you need to press the button 1 Add: 10 Merezha recognition

it is necessary to remove the option from the position Trace indicate the area of ​​assignment of this route, optionally Mask of significance<Next, enter the submersion mask for a specific route, as required Gateway

Next, enter the address of your local gateway (you can find it in your contract, or you can see it at the local network connection station on the computer that was connected to the provider’s cable before installing the router). I'm a koristuvach

Metrics or Automatic..

This is where you can now finish setting up routing on the D-Link DIR-320/NRU router.

Setting up Wi-Fi connection D-Link Router DIR-320/NRU allows you to transmit drone-free surveillance data using a Wi-Fi connection on the client side. Adjusting the dartless Wi-Fi limits – on new D-Links of the DIR series it vibrates at p. WiFi Zagalni customization.

Here you can fully connect Wi-Fi module on your router. Then the router will change from droneless to wired..

Go to p. Basic setup

, in which you can set the name of the measures and select the standard dartless link

Add an access point— selects the security identifier (SSID), which allows you to capture your data from Windows devices, serving as a security feature. However, in this case you will have to create a profile to connect to the drone-free line manually..

SSID– name of the dartless line (line identifier). 6 Under this name, the gap will be visible in drone-free Wi-Fi clients. 1 Kraina 12 - option

Russian Federation Channel

— primus vib_r channel bezdrotovogo svyazku. Not recommended Mother to the right of the channel number Most of the Wi-Fi use is on this channel itself (few people change it).

Ideally, it is recommended to change your selection on the channel or channels

to minimize the possibility of interference with vascular measurements. No-dart mode- here you can select the mode of wireless communication 802.11g or 802.11n, or perhaps the old 802.11b or their combination. In the mixed mode of operation (802.11 B/G/N mixed), please note that the smoothness of the operation of the mode when connecting different clients is limited to the most suitable client. Trochi can be placed lower Maximum number of clients

it is necessary to remove the option from the position , how to connect to the router. Encryption of the drone-free network is being adjusted in p.

to minimize the possibility of interference with vascular measurements. Improved safety. In option Merezheva authentication You can select the encryption algorithm for the drone-free network. AES, ale z AES Non-drone clients may not be able to perform activities. We recommend setting the option TKIP+AES

, then you will ensure success with more Wi-Fi clients. WPA key renewal period

You can pay for the money. I would like to say a few more things about one option in Additional settings dartless line. There's an option here

TX tightness This is indicative of the prominence of the antenna of a dartless connection. In an experimental way, you can reduce it to such a level that you can’t see too much of a border between apartments/rooms.

This is to reduce the credibility of the evil, bezdrotnoy measure on the side of your fellow hackers :) And in health you will be better off, especially if you quit smoking 😉

Why do you need to fix it?

dartless Wi-Fi

The lines in the D-Link DIR-320/NRU can be completed. For the Wi-Fi connection, you will be able to look at these higher manipulations. - Port forwarding for torrent Setting up port forwarding (port forwarding or Port Forwarding) must be disabled if you plan to interfere with programs and devices in your home network that allow unsolicited access to them from either the local Ido network or an external one. Internet. For example, you may need access to your home IP web camera or occasionally work with file-sharing services such as torrent. The principle of port forwarding is straightforward: You independently inform the DIR-320/NRU router what type of unpowered call traffic to the router should be forwarded to the IP address of the home network. Vlasna, I can’t stop tsking you

Let's take a look at port transfer in D-Link DIR-320 NRU for Utorrent: You can set up Port Forwarding on your D-Link router at p. Intermediate screen

Virtual servers 22222 .

It is also important that for correct Utorrent robots you will need to connect your service to “Real IP”, otherwise port forwarding in the router will not be enough!

Without a visible IP address, you will not be able to fully distribute torrents, because

you will respect NAT in Aido. Most often, without a visible IP, torrent distribution takes up less than 1/3 of the channel width. These are all the necessary settings that may be needed during home use of routers DIR-620, DIR-300/NRU, DIR-615, etc.

Router Dir-320 - the brainchild of the popular company "D-link" - є dartless router With speedy data transfer of 54 Mbit/s and support for “USB 2.0”.

Sorry, now

given model

It’s no longer practically relevant, and some of the technical characteristics of the router - at the bottom of the page - are deprived of most benefits. This was confirmed recently - in 2011, the company "D-link" released updates "Dir-320 NRU" with support for "WiMAX", "3G GSM", "CDMA" and data transmission speed up to 150 Mbit/s - for 2011 this is enough Good showmen. A short look at the dir 320 router



Report list

technical characteristics

hemstone attachment

  • connected;
  • “USB” - “lit” - the external USB device is connected, it lights up - the connection is inserted.
  • Rear panel of router dir 320:
  • "LAN 1-4" - ports for connecting edge devices;
  • "Internet" - port for connecting to the "Ethernet line" or DSL modem;

"USB" - port for connecting USB modems;

"5V-2A" - socket for connecting a power adapter;

"Reset" is a button that will reset the device to factory settings. How to set up an Internet connection on a router d link dir 320? 320 Prepare an agreement with the service provider immediately, as it will contain the authorization data necessary for setting up an Internet connection. To go into the router settings, you must connect the router d

If your router has previously been in use, then before carrying out the adjustment it is necessary to reset its configuration to the factory default for further assistance. Reset buttons.

Otherwise, authorization errors may occur (for example, an incorrect login and password are entered) and problems with setting up the device. Below ideas external look

router interface d link dir 320 with version PZ “1-2-94”, which is standard.

After your first login to the web interface, you must change the administrator password (to ensure a barrier against possible unauthorized entry), then click the “Save” button.

  • To create a new Internet connection, open the “Metering” section, then “Connection”, click the “Add” button and do the following:
  • "Im'ya" - fill in without changes;

“Connection type” - this parameter is included in the authorization data in the agreement with the provider.

Select one of the options:

  • PPPoE
  • at the "PPP Setup" section, enter "Corister Name" and "Password" (two);
  • Check the following parameters: "Keep Alive" - ​​connection support, "NAT" and "Merezhevye screen";

Connection type

"Vendor ID" - as required by the provider.

  • PPTP or L2TP
  • If you need the connection to be carried out automatically, select “Connect automatically”; "Service name" - enter IP or url addresses
  • authentication servers;
  • enter “My name” and “Password”;

In the "Encryption" row, select one of the options: "Disabled", "MPPE 40/128 bit", "MPPE 40 bit" or "MPPE 128 bit".

  • 3G
  • In the “Mode” row, select “Auto”;
  • authorization data will be replaced by analogy with the description;
  • "APN" - access point name;

Call number - this is the number for connecting to the operator’s authorization server.

Setting up wifi on the router d link dir 320

  • To set up a dartless connection, select “Dartless settings” and click “Set up dartless connection”.
  • indicate in the “SSID” row the name of the created border;
  • “Kraina” and “No-arms regime” - no changes;
  • in the "Channel" row - select either "Auto" or type 1 to 13;

If you plan to limit the number of connections to a limit, enter the appropriate number in the “Maximum number of clients” row.

After this, open “Security Settings”.

Select from the “Merezhev Authentication” row one of the following options:

A). "Open", "Shared" or "WEPAUTO"

c) "WPA-PSK", "WPA2-PSK" or "WPA-PSK/WPA2-PSK mixed"

Be sure to select and enter the security key that will be required for further connection wifi devices to the dartless line.

Setting up IPTV

Please note that the IPTV section is available only for PZ versions 1_3_3 and 1_4_0.

Navigate to the “Meister” menu IPTV setup»

Here you just need to select the port number to which the set-top box is connected.

  • click "Add";
  • "Type" - for "IPTV" select "Prosorium";
  • VLAN ID enter as required by the provider;
  • In the “Port” row, select the port number to which the set-top box is connected.

To finish setting up the d link dir 320 router, click “Save changes”.

The version “1-2-94” does not have the “Master IPTV” section.

In the “Addatkovo” menu, turn it over to indicate “IGMP”:

Additional capabilities of the router d link dir 320 In yakosti dodatkovykh nalashtuvan varto zvernuti uvagu on WMM (Wi-Fi Multimedia)..

"ACM" (language access control);

"Ack" (confirmation of acceptance).






There is no big difference in the current warehouse “web interface” between versions “1_2_94” and “1_3_3”. However, starting with version “1_4_0” the router interface is more similar to: the main elements can be found in the following illustrations: Yakshcho vi pridbali


  • new router

  • Or you have moved to a new place of residence from the old property, then, after all, you will need to tune up the d link dir 300 router with Rostelecom.

  • This process is not as smooth as it appears at first glance.

  • In this article we will describe all stages of this procedure, as well as setting up the d link dir 320 Rostelecom router.

  • Preparing the router

Setting up the router 300 Rostelecom - old firmware

New firmware for the robot model dir 320

Increased WiFi protection Visnovok on your hair.

We enter the new symbols in the two fields, confirming that we are going through authorization again, and with new data.


  • If everything is organized correctly, you will see the main menu with blue buttons in a large size.

  • To print the settings, follow the next steps:

  • press on the first (lower left) button of the other row “Adjust manually”;

  • At the top text menu, select the “Mereza” item;

  • The WAN connection is already open;

  • scroll down the page and in the lower right corner there is an emboss “View”;
    Check that the dock side is updated, the “Add” button will appear on the right hand, and we will stamp it on it;

  • on the page that is opened, indicate the type of Internet connection – PPPoE;

  • the port cannot be touched;

  • I choose whatever (that’s what your connection is called in “Medium Connections” on your computer);

Below is the login from the agreement with Rostelecom, as well as the password;

  • Save your changes, then click “Save” in the center of the page.

  • At this stage, we collect the Rostelecom agreement from our company and check the settings of the dir 300 router - we go to any page of the Internet.
    Vaughn can open up without any problems.

  • I lost my ability to fix the dartless line.

For whom:

Open the WiFi menu item (located in the order from “Merezh”);

in the SSID field, enter whatever name you want for your network and move on; To set a password, save changing and selecting from the available options WPA2-PSK; Enter the password and it is saved again.

That's all, the connection and drone-free network are ready for work.

  • 168.0.12;

  • How does the servant Gudok sound?

  • 168.0.1;

  • About transferring subscribers

  • mobile operator

Rostelecom on Tele-2 can be read here.

And that's all.

Tell us about your Internet connection. Whatever the food is in the comments! Get it right home trim is not possible without understanding the particularities specific outbuilding.

This article is about two such devices, and about the configuration of D-Link DIR 300 and 320 routers for operation under the Rostelecom operator.

The process is not particularly complicated and is easy to understand. Minimal visibility computer literacy

It will be much easier to acquire information.

To avoid any complications during future calls before installing an access point, you need to reset the configuration to the factory setting.


The easiest way is to use the additional buttons on the device. You need to press and hold for 10 seconds. Naturally, the router may be connected to the outlet.

After resetting the device settings, it will take an hour (no more than 10 seconds) to re-enable.

Another point of note is that you need to check the Internet Protocol (IPv4) settings in Windows system. For this purpose it is necessary to quickly navigate its interface and carry out such actions. Universal method for all Windows systems We press the combination “Windows” + “R”. The "Viconati" window will open.

In the text field, write the command ncpa.cpl and press “Enter”.

The connection window will appear until you need to log in to the actions described below.

This method works for everyone

Windows versions

  • to 10.
  • login/password pair - admin.

Setting up the dir 300 router for Rostelecom can be done using any Internet browser, for example, Internet Explorer.

After starting, you need to place the cursor in the address row, enter the address value (192.168.1.1) and press enter.

The customer authorization page will open.

The field contains login details: koristuvach – admin, the password is the same.

Respect!

For increased safety, please follow this recommendation.

After changing the data and confirming the changes, the main page of the admin panel will open.

Depending on the firmware version, there may be new features.

  • You can update the firmware from the system section -> software update, previously downloaded from the D-Link website.
  • Rostelecom network parameters for firmware 1.4.x
  • Now we go to the section of advanced settings, for which we click on the corresponding inscription in the lower right corner.

On the page that has opened, go to the “Merge” tab and select the WAN subsection on it. Further installation of the dir 300 router depends on the technology used by the provider for connecting subscribers. Rostelecom most commonly uses the PPPoE standard.

PPPoE configuration:

On the WAN page, select the appropriate connection type.

The name of the connection is indicated (it may be something like that).

The peculiarity of the PPPoE standard is that the client is authenticated as an operator using a login/password pair, which can be found on a copy of the contract or from the provider.

This data must be entered in the additional fields on the WAN page.

  • Yak nalashtuvati router d-link dir 300 on
  • old firmware
  • Let's take a look further.
  • After completing all the necessary fields, “Save” will be embossed.

Let's finish this configuration.

If you plan to use Wi-Fi, you can also adjust the security parameters of the drone-free network through the DIR 320 panel.

No-dart mode on a D-Link router Recovering the stolen dartless connection

There are several variations depending on the firmware version.

Parameters for devices with firmware 1.4.x on main page The admin panel in the evil menu is stamped with the hyperpower “Meister of setting up the drone-free network”, which is located in the Wi-Fi block. Following the recommendation of the Master, we are concluding

Pokrokov's installation

  • drone-free access points.
  • To change the Wi-Fi configuration, go to the advanced settings page (how to do this is described above).
  • For the Wi-Fi block, select the basic parameters.

On the page you can change the network name (SSID), the border and the dartless mode.

Next you need to go to the security menu and enter the following parameters:

Network authentication – WPA2-PSK.

  • The password for the drone-free range is specified in the Pre-shared key field.
  • The encryption type (WPA encryption) is selected using the combinations "TKIP/AES".
  • We save the configuration using the “Change” button.

Parameters of devices with firmware 1.3.x

On the main page of the admin panel there is an embossed “Adjust manually”.

When entering the main parameters it is indicated: I'll use the Latin alphabet anyway. Country - "United States of America" ​​or "Russian Federation". Dartless mode – universal mixing mode (11b/g/n). On the security tab you can specify a password and intermediate authentication. All actions are confirmed with the “Change” button. At this point, the configuration of the D-Link DIR 300 router for Rostelecom can be completely completed. Connecting the D-Link DIR-320 router to a 3G modem. The DIR-320 router, manufactured by D-Link, is not the most popular router model.

However, this device itself is most suitable for connecting to a 3G modem. How do you want to set up your connection before 2.0 type A, intended for connecting to a USB modem. Port of retouching at posterior crista

device, full of evil roses. The router supports automatic connection to 2G/3G drone-free range. Sered

additional functions

– the ability to increase/disable the PIN code verification and change the PIN code. There is a list of firmware versions for the D-Link DIR-320 router. The optimal firmware version for setting up a 3G modem is DIR_320NRU-1.2.94, it can be downloaded on the Internet. If a different version of microprograms is installed on the device, this is not critical. You can also connect a 3G modem, the setup process will just take more than an hour.

Connecting the D-Link DIR-320 router to a 3G modem - log into the router Now, let’s look at connecting the router with firmware DIR_320NRU-1.2.94. Let's get started

operating system

computer: preparing

I'll cut the map

It is important to adjust the provider.

Then you can start connecting and setting up the router.

If there is a PIN code installed on the SIM card that is used in the 3G modem, go to the USB modem menu.

Select PIN, enter the code in the field provided, then click Change and save settings. At this point, the connection between the router and the 3G modem is completed. The D-Link DIR-320 router can also be used for operation with the 3G standard.