You can do this if you want to carefully remove any file from your backup. How to deal with such a situation? Let's take a closer look at the situation.
To troubleshoot problems, check the correctness of the connection and setup of the equipment
Before you begin repairs and other activities, please understand why the OS cannot recognize your hard drive. The behavior of the device may vary:
- the attachment is not visible in the BIOS
- appearance of stupid messages when starting the OS
- in the Windows interface, set the memory size to 0 bytes
- don't get obsessed with the OS
- The logical drive is not visible.
As we can learn, factors are impersonal. If the problem is identified logically, then the user at any stage of the PC shutdown begins to receive notifications when working with one of the sections “Disk is not formatted.” This means that the system has begun to treat the disk as a divided area. As you can see, a virus program or bad blocks can damage the disk. The problem is largely determined in the first case, the other means those who can cope with the accumulation of caps. However, it’s important to ensure that your nutrition is realistic, without smut, without being hampered by impulsive, impulsive manipulations. Don't create sections, don't delete old ones, format anything or format.
If we talk about writing, then this information is like “hard disk drive failure”, “drivers not found”, “disk boot failure” etc. All these phrases mean that the PC cannot recognize the device. Such messages may appear at times when using DVDs or CDs, SSD drives or a primary flash drive.
You can see that the disk can be accessed through the BIOS by logging into the system at startup and selecting the “Standard CMOS Features” menu.
diagnostics
The devices are not visible for various reasons. It is important to check the motherboard, hardware cables, the device itself and the software. To shorten the list of potential scammers, it is necessary to connect the device to a strong loop and try to work with them.
If another disk appears under your hand, and you know that it is working properly, then replace it with the faulty one. This will help ensure that the motherboard is functioning correctly. It’s also easier to transfer your “invisible” storage to another PC - perhaps the reason is in the software warehouse? As on the right itself, there are a number of methods that will help turn everything into its place without compromising the services of dear fakhivts.
Note! Since you have no experience in repairing computer components, and through the descriptions of the most common manipulations, it became clear that the problem is in the software-secured, Then take the computer to the service center. Let me show you how real it is (and how expensive it is) to start a device. The worst case scenario is to forget about losing files and get a new hard drive.
BIOS
Check your system settings now. It’s easy to enter the BIOS, press the Del or F2 key while installing the OS. A possible problem with setting up your computer is indicated by an incorrect system date in the BIOS. Resolve the problem with help from a banal skidannya fix, for whom? motherboard Take out the battery on a splinter. Before you turn the component back, check the bottom. It’s funny how this decal is worn out to benefit the hoarder’s productivity.
Prilad can also be lower on the list of bad things. Checking this parameter is in the “Boot” section. Look, the HDD has been rebuilt in the first row of the priority list.
The problem with food
Open the disk, click, don’t click, and every hour it appears and knows? In this situation, obviously, the main problem is the lack of food, about which we can talk and make a sound (work cycles change). To improve the functionality, purchase a hard-working block of life. In addition, you can try a less important component.
OS problems
BIOS “unloads” devices, but Windows doesn’t? Adjust the madness manually. For whom should you sign these actions:
This method often helps unsatisfactory people turn their hard drive to life.
Often a component does not function due to the inconsistency of the file system. For adequate operation, NTFS is suitable. In “Disk Management” you can select which installation option is installed on your PC. If the system is different, it is better to reformat the disk.
conflict of ownership
Since the PC has two built-in storage devices of the same brand, conflicts arise. Check and adjust the skin disc thoroughly to avoid such a situation.
Problem with contacts
A very banal official - this is the number of contacts. Correct the defect by reconnecting the wires. Remove the cover, remove it from the container, turn it off and reinsert the cables into the hard drive. If nothing has changed, then cut through the other pair of wires. Don't forget that the device can be connected to the board through two main connectors (black and blue). For more reading, there is a blue rose, please connect until then.
tire
SATA II (SATA), which is required by many modern storage devices, may not be supported by older operating systems. The solution is simple - reinstall Windows. If you don’t want to use a newer OS, then re-install the old one special drivers for necessary interfaces. You can find out what drivers your system needs on the motherboard retailer's website. Її type of prescriptions from the authorities (click right button Misha on “My Computer”).
The computer may “Do not leak” the disk for many reasons, for which you cannot access it on your own, you will need the help of a competent accountant. However, if you know the causes of such a problem, you can save yourself from rash actions.
The main causes of this problem
Most often hard drive when entering the BIOS, it is impossible to access anything from anything. You can confirm your intentions by becoming attracted to another device, for example, from another hard drive or CD, by going to “Computer Management”, selecting “Device Manager” and searching for the required disk. If the machine does not boot, then the problem is in the BIOS. Your hard drive may not show up in the BIOS due to a broken connection between the power cable and the interface cable. On the right there is a bunch of cables coming from the life block: one connection to the motherboard, the other to the hard drives. If the HDD connection cable is not connected correctly, the activity indicator on the “system unit” will be constantly lit.
The same problem can occur if the jumpers that switch the screw to the required operating mode are not properly adjusted. It happens that there is no jumper at all. The situation becomes even worse if the SATA hard drive is not indicated. Here you can help by changing the settings in the BIOS. If the PC does not “boot” the IDE hard drive, then you can check whether this controller is enabled in the BIOS.
Reasons why the drive is not recognized in Windows
Most often, the system does not boot the hard drive if the priority of the storage options is incorrectly set in the BIOS. For example, in the characteristics that indicate the importance of the operating system, the first number is the CD-ROM, and the second is the hard drive. In this case, do not remove the drive fancy disk Otherwise, the system will not be able to recognize the hard drive. Chi don't count externally harsh The disk can be transferred via current flow to the USB port of the computer. This situation is typical when a large number of peripheral devices are connected to USB ports, which are used both for exchanging information and for retrieving food.
The machine may not recognize the hard disk due to a fault in the power supply unit. Since she sees loud, uncharacteristic sounds when re-enchanted, then in all cases she does not feel any strain on the lifeblood block. The reason why the computer does not detect another hard drive may be incorrect cable connections or a conflict between two hard drives of the same brand.
For rich people, when they log in, I’ll see something like “DISK BOOT FAILURE.” INSERT SYSTEM DISK AND PRESS ENTER”, “Operating System Not Found”, “Missing Operating System” food is to blame: what to do next?
These words mean that your computer simply does not have a hard drive. The reasons for this may be decal. Well, why doesn't the computer have a hard drive?
Why doesn't the computer boot the hard drive? The broadest reasons
1. The most common reason is oxidation of the contacts on the signal cable (loop) or improper contact of the hard drive connectors (MOLEX or SATA).
To ensure that the diagnosis of problems is correct, you need to remove the hard drive and try to run it on another hard drive.
2. Another reason could be failures in the BOIS settings, which could lead to incorrect installation of devices connected to the computer. To eliminate this problem in BOIS there is a reset or reset function, which returns everything to factory settings. There are six ways to reset BOIS, which are available only to programs, and two you can use yourself.
- First method. Shutdown the computer. On the motherboard you will find the Clear CMOS jumper,
Please note that it will be located close to the battery. Replace the jumper from contacts 1-2 to 2-3, wait for 15 seconds, turn everything in the cob position and your system is reset. After this procedure, BOIS automatically recognizes your hard drive.
- Another way. You also need to turn off the power and find the CR2032 battery on the motherboard and remove it from the socket. Check the line until the capacitors are discharged, leading to the BOIS reset. Insert the battery in the correct place and turn on the hard drive.
3. If your hard drive has an IDE interface, then there are jumpers on it, which you can use to select Master, Slave.
When connecting another device, such as a CD-ROM, the jumpers on them are responsible for either the Master or the Slave on each device, so the hard drive is responsible for the Master, and the CD-ROM Slave for the same reason. Only people in this type of BOIS will correctly accept a new device.
4. Where do you connect external disk(ESata, USB) and the jack is not recognized by the system, then try connecting something else to this socket. If it works, but your current disk is not working, then the reason is somewhere else.
5. Often, due to overheating of the bridge microcircuits, which are responsible for the PATA and SATA controllers, which are installed on the laptop motherboard, the hard drive may not work or does not function properly. In this case, you need to turn on the laptop and let it cool down.
6. The hard drive cannot be subjected to impacts or other mechanical impacts. In a different way, in a new way they can show up mechanical care such as smudges on a magnetic surface. Since the heads of the hard drive move over the disk at a very small distance, any impact can cause the heads to become stuck with the disk, resulting in damage and further operation of the disk is impossible.
What if they go berserk to the Fahivtsi?
Let's take a closer look at the remaining fallout. Because the hard drive is working, but with its operation there are noticeable uncharacteristic sounds: clattering, moving (unstable revolutions), rubbing, then this is a physical problem that can be identified with the help of programs such as Victoria or mHDD. You can only accept them if you are good at what you do. Otherwise, you will only end up doing more harm without sacrificing your chances of updating the information from your hard drive. Then you need to go to a service point, where their technicians can carry out trouble-free diagnostics and, if possible, repair the disk, or if any malfunctions are detected, carry out further work. And for any kind of hacker, the information that is saved on your disk is first and foremost important.
Why bother if the operating system does not drain the hard drive?
In some situations, if the hard drive does not recognize the hard drive for trivial reasons: a bad USB connection or incompatibility with the USB 1.1 and 2.0 protocol. Some repair workers who are hesitant to repair hard drives are trying to repair the hard drive on their own. At the same time, there are no signs about those that their folding occurs in sterile minds, which does not allow the appearance of saws and fingertips, which lead to true malfunction. Since the gap between the disk and the head is only a few microns and any powder can lead to tatters, the disk must be pulled out of alignment.
Coming from all overinsurance problems, if the computer does not recognize the hard drive, first of all, you should try all the tests available to the average customer. Otherwise, you may waste both your hard drive and all the data that is on it.
If everything is overwrought, more information did not help you, go to the service, even if you know why the computer does not empty the hard drive and you know how serious it is...
In contact with
Hard drives are necessary to save information and prevent access to it. Often a set of hard drives is installed into the computer, which is a reasonable solution. Installation on the same HDD or SSD drive operating system and saving files on another storage device can significantly speed up Windows.
The problem has been expanded: on any computer, do not load the hard drive. It may be due to software or hardware failures. If you want to access information that will not last long, you should know that Windows does not load another hard drive. For the sake of putting things in order, first of all, stay up to the internal accumulators. In this case, the stinks may be projected onto external hard drives.
How do you know what the hard drive is doing?
Since the Windows operating system does not waste the hard drive, it is clear that it is simply out of order. There may be a number of reasons for this: physical damage, components going out of tune, electrical breakdown and others. Before you begin to solve the problem, why the computer does not drain the hard drive, you need to reconfigure what it is working on.
One sure way to check the usability of your hard drive is to connect it to another computer. For whom is it better to know system unit If you already have a number of storage devices installed, turn on one of them, and connect the hard drive to the test site.
If you can’t store the storage on a third-party computer, it’s better to bring it to the repair specialists. You can identify the cause of the problem and advise if it is possible to replace the hard drive or if you would like information on a new one, if so.
Why doesn't the computer boot the hard drive?
Since testing the storage on a third-party computer has shown that there are no problems with it, you can try to find out for yourself why the PC does not waste the hard drive. The main causes of the problem are discussed below.
No food via contacts
The most common reason is not to use the hard drive on your computer if it is not connected correctly. It is necessary to change the connector on the motherboard where the storage device is connected, and the connector (for which you can connect another hard drive).
If there are no problems with the socket, reconnect so that the connection is reliable, and the contacts are connected to transfer the food. You can try other cables to connect the storage device.
Incorrect priority settings in BIOS
Owned computers know that in the BIOS you can set the storage capacity of storage devices, both internal and external. You may need, for example, to install an operating system from a flash drive. If the computer does not load the hard drive, there is a chance that it will have low priority settings in the BIOS or accumulate connections altogether.
To correct the situation, you need to launch the BIOS (to do this, press Del or F2 when starting the computer). When the BIOS opens, you need to go to the section where there is information about the priority of storage devices (find the BOOT item). Next, you will need to install a hard drive in one or the other place that is not recognized by the computer, after which you will lose the ability to save installed settings And you can reinstall the system unit.
Fixed the BIOS settings
However, the BIOS itself does not recognize the hard drive, so it is obviously not possible to set the priority of its drive, which means that the storage devices will not start at the same time as the system. The presence of a BIOS failure can be determined by the system date and hour. If the stench is wrong, for better decisions However, to install this you will need to remove the battery from the motherboard first, then put it back in and try to start the computer.
Conflict between hard drives
If the computer has two hard drives installed from the same printer and the same model, from them sleepy work problems may arise. In such a situation, it is necessary to configure one hard drive, then turn it off and set other settings on the other hard drive (change the name, “drive letter” and other parameters that identify the drive).
Old operating system
Windows XP and older operating systems may not support the SATA (SATA 2) interface to which current hard drives are connected. Microsoft has introduced support for this protocol in the new edition of Windows XP. If the operating system on the computer has not been reinstalled for a long time, there is a chance that it simply cannot work with a hard drive connected via the SATA protocol (SATA 2). In this situation, you will need to reinstall Windows XP to a version with integrated protocol drivers or install a larger operating system.
Marriage tavern
Another common problem is that if you don’t use your computer’s hard drive, it’s a shortage of food. Listen to the hard drive after turning on the computer. If it starts to make noise (get angry), and then calms down, we can talk about a shortage of food.
In such a situation, you need to try connecting one of your companions to the computer to test the hard drive. Once you connect one of the devices, the hard disk starts working without problems, you need to install it.
Incorrectly configured hard drive in Windows
If the hard drive is identified in the BIOS and spins up when the computer is turned on, then operating system Windows does not appear, not to mention those that need to be done.
Miy External hard drive does not appear, what about sim robiti? - get more power on the Internet, which you can surf on a large number of forums. And every day the number of such foods increases. There were no portable hdds - there were no problems, so to speak :-). But really portable hdds are even more portable media, which are becoming increasingly commonplace and becoming commonplace and commonplace, just like flash drives. Like any device, the stench can be harmful. The problem is that the computer cannot recognize connections to a new memory. What should you do if your external hard drive is not identified?
From this article you know:
First days because the external hard drive is not indicated
If you have experienced this kind of problem, it could be caused by:
- the disk itself;
- or there is a problem with your computer.
To begin troubleshooting, you need to check the USB ports on your computer. Connecting a portable hdd will need to be done using the corresponding ports on another port or on another computer. If another computer recognizes the external hard drive, then there is a problem USB port. If the computer is likely to recognize other devices, then check the USB support and connect them entered in the BIOS.
I'll add driver updates
The external drive is not shown, indicating a problem with the driver. To remove it, you need to click on the right step: press the right mouse button on the “My Computer” shortcut and select “Device Manager” (1):
Click on the "Disk devices" (2), and select the current hdd (3), right-click on the new one and select "Update drivers"
If the update did not bring the desired result, then remove the driver, restart the computer and install it again.
Changing the hdd assignment in the system
It is entirely possible that the external hard drive is not identified through the fact that the system has assigned the letter of an already connected drive. To correct this order, you need to follow the next path:
Start\u003e Control Panel-\u003e Productivity and Maintenance-\u003e Administration-\u003e Computer Maintenance
Select the item "Disk storage" (4) and press the right button, find your hdd (5) and select the item "Change drive letter or drive to disk" (6) and select another drive letter, whichever is correct:
marriage food
If checking the USB ports shows that they are serviceable, then your external hard drive may not be considered to be lacking in power. This may be due to the stagnation of the footwear, which involves a great waste of energy. To avoid such problems, it is recommended to connect the external drive using the standard cable included in the kit. Connections are made through the port located on the rear panel.
Vikoristannya block of life
In these situations, if there are two connectors required to connect to two USB ports, then connect both. Also, if you accumulate security devices with an additional block of life, you should vikorize it.
If the external disk does not show up, then the reason for this may be shortcomings in the life block, a loss of moral age, or a large number of devices installed on the new device. In this case, the best way out would be to install a life block that has greater tension.
Mechanical damage to hdd
If the external hard drive is not detected, then the problem itself may be your fault. This is verified by the supply to the new food. If you make noise with any device (all the characteristic sounds), then you won’t be able to solve the problem on your own. Other causes of malfunction may lie in the magnetic heads, bearing jamming, spindle motor windings, controller or microcircuits. If you don’t want to reconnect and reconnect your savings account, you can still get it out of the way. In such a situation, it is necessary to bring it into service center. Only those experts who know how to make adjustments and supply the necessary knowledge and evidence can accurately identify the problem, identify what is possible and answer your questions: why are we new? The hard disk is not shown.